Reviews
Fits: Others Universal
I wanted something inconspicuous.
Reflector is now required for installation of KOSORear Mudguard KS-MGXF-01.
We chose this product because it is not assertive and prevents the License Plate from bending.
Reflector was replaced with KIJIMA Reflector Slim 3, part number 305-2146.
KIJIMA Reflector Slim 3 can be installed without modification, and both the reflector included with the product and KIJIMA products are secured with M5 Hexagon Nut.
We believe that measures to prevent loosening of the Nut are necessary.
There are several ways to prevent nut loosening, but in my case, I use Nylon nut (something like Self Locking Nut) I used the
View detail
Fits: SUZUKI V STROM 1050, SUZUKI V STROM 650
Purchased for Loading Hook
I purchased this for the installation of the Loading Hook.
I may replace the Blinker sooner or later, so I need one with Service hole.
It is well made
View detail
Fits: Others Universal
DAYTONALicense Plate Holder
I had been looking for the color I wanted, but could not find it. I was able to buy other items at the same time, so I was able to get free shipping and I am satisfied with the large size. View detail
Fits: Others Universal
Yo...
Installed on the License Plate of Mrs. Rebel250.
I have pushed and pulled this product with it installed before and it went gasketed, but it bent with the License Plate, so I think it has no strength at all.
but purchased and installed again lol
This product is a little larger than the License Plate, and the main points of this product are that it is lightweight and can be easily installed. (´∀`)
Incidentally, when using the included anti-vibration sponge, the gap between the license plate and the panel becomes too large and the panel floats.
Overall, I think it is a good product for dress-up purposes.
View detail
man who will not bend
I once had a crack on my moped license plate, and after consulting with a motorcycle shop, I was told that I could use a washer between the screw and the plate holder to prevent vibration. Since then, I have been buying and using PlateHolder for all types of vehicles.
DAYTONA's License Plate Holder comes in a variety of colors, so it was hard to decide. At first, I thought I would choose Gold, which is not seen very often. However, I thought that the yellow color Number would look too large, so I decided to go with black this time.
It is easy to install and the material is aluminum plate. The spacer is also more solid than shown in the photo. The PlateHolder gives the PlateHolder a high quality feel and a top ranking. It also protects the thin and bendable moped license plate.
Moped License Plates have different shapes depending on the municipality. The recently popular local moped numbers are often of a unique shape. Plate holders with raised edges cannot be installed. It is advisable to check the shape of the number before purchasing.
Basically, when you buy a new car, you also get a new License Plate. New plates look good on new cars, so I buy a new Plate Holder every time I buy a new car. I am planning to change the color of the Number to Pink in the near future, so I will buy a new one in a new color. It comes with Washer, but the price is not too expensive, so it is very helpful.
View detail
Metallic feel is very elegant!
Installed on YB-1FOUR.
It prevents the License Plate from bending, and matches well with the Chrome plating Fender.
View detail
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
For One point in the License Plate Department!
I purchased it as a one point accent for the license plate section, and as a result of installation, the license plate section looks tighter! View detail
Fits: Others Universal
It was a little too flashy.
I bought this for Number protection and dress-up.
I imagined that the License PlateBody would fit in the body, but it was not quite large enough, so it stuck out. I had to put the attached cushion on it because it floated.
The frame itself is a bit Large, so in the case of Gold, it was an unfortunate point that it would stand out too much.
I think it is an Exactly product for those who like to be flashy.
View detail
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
Simple but well-made License Plate Bolt
I bought it for Dress-up for One point.
The screws on the license plate are the same for all car models, so I think it will fit most large car models.
After several years of use, the color has not deteriorated and there are no bald spots.
Parenthesis has a simple structure with a slit design that is compatible with other PremiumZone products.
View detail
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
DAYTONA for peace of mind
Since I installed the Fender Eliminator Kit, I wanted to change the License Plate Bolt as well, so I bought it. I bought the blue color to match the color of the car body, but the anodized blue color is also shiny and matches well with the car body. View detail
Fits: Others Universal
License Plate Reinforcement
I was riding my CB1300SF and was rear-ended by a car and although I did not fall over, the License Plate was bent. I bought a Plate Stabilizer and installed it to avoid any more rear-end collisions! View detail
Fits: Others Universal
To prevent unexpected bending.
[How is it used?
It took some time to restore the LITTLE CUB that was given to us by hanghang, but we managed to get it into shape and acquired the numbers for public road driving.
Was the one you received as per Image?
It is not a type of holder that protrudes a large amount from the perimeter of the license plate, but a type that works quietly on the reverse side of the license plate, so it was exactly what I had imagined.
Was the installation difficult?
Bolt and Nut in 2Quantity:Set Loosen and remove the License Plate, insert this product into the NumberReverse side, and tighten the supplied bolt from the rear side with the nut.
This is a Custom that can be done by even beginners in Motorcycle maintenance.
How was your experience with it?
Quantity:Pair (for Left and Right) and the Holder protrudes just a little bit on the underside, but it looks great.
In my case, I purchased the black color, but I felt it was tasteless, so I put Carbon Style Decal on it. It is not noticeable at all, but it is enough to satisfy my self-satisfaction.
[Included Parts:were they on?
License PlateStabilizer (aluminum plate with cut-outs) Body and 2 quantities of Bolt and Nut for License Plate fixation.:Set, for preventing resonance caused by vibration? UrethaneTape is included in the package.
[Was there anything that disappointed you?
Personally, none at all.
If you want to make it stand out even more, there is also a lineup of types with edges, so please check out Webike's product introduction section for more details.
Other items that would be helpful
Point and hang of installation
The holes for fixing the bolt on the License Plate Stabilizer side are slightly larger and wider, so please adjust the holes to your liking when installing the number and bolt to the car body together with the number.
Installation with proper Torque management.
When installing in a vehicle with a lot of vibration, it may be safer to apply Screw lock agent to the nut on the back side or replace it with a Lock nutType nut.
[Availability and clarity of the Instruction Manual
I think a simple Installation Instruction Manual was included...sorry my memory is a bit fuzzy.
I think it is a top level product in terms of ease of understanding.
[Points to note]
As I mentioned above, it is about proper Torque management.
Install it securely so that it will not fall off while driving.
[ITEMS TO BUY TOGETHER
There is no shortage of basic installation with this product alone.
As mentioned above, consider using Screw lock agent or lock nut as a self-protection measure when used on a vehicle with a lot of vibration.
Opinions and requests to Manufacturer.
The abundance of trapezoidal and rectangular types and lineups is very helpful when making purchases.
View detail
Fits: Others Universal
with Reflector Black
Easy to install with good design and product precision.
The vehicle on which the SlightRear Fender was installed is a Z900RS with ARCHI's SlightRear Fender.
The number base that comes with the SlightRear Fender is designed to be installed using an OEM reflector, but the OEM reflector was not the right width for my taste, so I purchased this product with a narrower reflector instead.
The supplied Bolt nut and FlangeSpacer were not used because different ones were installed.
I did not use the urethane sponge, but I am satisfied with the appearance of the Image without any resonance.
View detail
Fits: Others Universal
For License Plate protection
I purchased this to protect the License Plate. As other reviewers have mentioned, the License PlateBody does not fit into the groove of the Frame perfectly. I don't know if this is the reason for the cushion material, but I think the PlateBody will have to be lifted a little. I think that people who purchase this type of frame probably want to fit the license plate into the groove of the frame. If you cannot fit the license plate into the groove, we recommend you to purchase the type without groove. View detail
Fits: Others Universal
Note that Reflector is easily removed.
[How is it used?
I wanted to refreshing around the Rear of KDX220SR during Restore, so I set the Fender EliminatorSpec. to be used, but it was too refreshing and the Number seemed to bend easily.
Did you receive the item as per the Image?
butchered Material:It is a simple product made of aluminum with little assertiveness, yet it is a functional product that seems to work well and is exactly as shown in the Image.
Was it difficult to install?
Once the License Plate is removed from the vehicle, this product is inserted into the back of the License Plate and the work is completed.
BoltQuantity:Easy Custom that only requires 2pcs removal and installation to finish the work. (?) It is
How did you like it?
I installed it on a vehicle that vibrates a lot, but so far I haven't noticed any loose or cracked troubles.
Was "Included Parts:" attached?
Reflector type was purchased, so Reflector Plate, UrethaneTape for vibration reduction, Bolt&NutQuantity for installation.:2pcs BlackAluminumBolt colorQuantity:2pc. Set was included in the package.
Were there any disappointments?
As mentioned in the Title, the Reflector was removed from the Body during the installation process.
Looking at the Mounting Base, there were no claws for mounting and no trace of adhesive or double-sided tape, so it was a wonder it was still attached.
Probably if it had not been removed by this Timing, it would have come off during driving, so I wonder if I am lucky or not... I glued it with RubberBond for vibration resistance, and so far it has not come off.
Other items that would be helpful
Point and hang of installation
Since there is room in the large size of the hole for fixing the bolt, if you install the bolt properly, the bolt will be slanted or the bolt will be too large for the quantity of the bolt.:Pair (for Left and Right) If you are concerned about this, please check the upper and lower Quantities.:Pair (for Left and Right) Install it while watching the Balance of the
[Availability and clarity of the Instruction Manual
This easy-to-understand product also comes with an Instruction Manual, which is typical of Daytona's products in terms of ease of understanding.
[Notes]
As I mentioned above, Reflector is easy to remove. (Is it an individual difference?) I think it would be better to reattach it firmly with double-sided tape or Bondetc. to avoid a sad ending.
[ITEMS TO BUY TOGETHER
Nothing in particular, this product is all that is needed to complete the work.
However, it may be a good idea to purchase double-sided tape or bond etc. if you do not have them on hand to prevent the reflector from falling off.
[Opinions and requests to Manufacturer
Please make sure to take measures to prevent Reflector from falling off.
A few more color variations would be even better.
View detail
It was not for 125CC!
I thought I bought it for 125CC, but the product is for Horizontal Type, so the upper Quantity on the License Plate is not available.:Pair (for Left and Right) has overflowed.
The reason is that I did not carefully check the shape of Engine Displacement Volume and License Plate.
It is a waste to replace it with another product so we use it with the overhang.
Parenthesis bad (crying)
View detail
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
For Dress-up
PREMIUM ZONE License Plate HolderQuantity:Set and
DAYTONA lightweight License Plate Holder for 126cc and above at the same time
Purchase
I am satisfied with the dress-up.
View detail
Fits: Others Universal
To prevent LicenseNumber bending
I bought this to prevent LicenseNumber bending.
As for the work, remove the LicenseNumber (10mm Nut).
Install with Holder
View detail
Fits: Others Universal
For reinforcing License Plate
The license plate was installed as a reinforcement for the Fender Eliminator as per the product. View detail
Fits: Others Universal
No concerns about License Plate
I bought the Reflector to stabilize my squishy License Plate. It is easy for anyone to install. 。
To prevent the Plate and Holder from squeaking and squeaking, a rubber plate is attached between the Plate and Holder, but it is a little thick and not so good.
View detail