Reviews
Fits: SUZUKI V STROM 1050, SUZUKI V STROM 650
Purchased for Loading Hook
I purchased this for the installation of the Loading Hook.
I may replace the Blinker sooner or later, so I need one with Service hole.
It is well made
View detail
Fits: Others Universal
DAYTONALicense Plate Holder
I had been looking for the color I wanted, but could not find it. I was able to buy other items at the same time, so I was able to get free shipping and I am satisfied with the large size. View detail
man who will not bend
I once had a crack on my moped license plate, and after consulting with a motorcycle shop, I was told that I could use a washer between the screw and the plate holder to prevent vibration. Since then, I have been buying and using PlateHolder for all types of vehicles.
DAYTONA's License Plate Holder comes in a variety of colors, so it was hard to decide. At first, I thought I would choose Gold, which is not seen very often. However, I thought that the yellow color Number would look too large, so I decided to go with black this time.
It is easy to install and the material is aluminum plate. The spacer is also more solid than shown in the photo. The PlateHolder gives the PlateHolder a high quality feel and a top ranking. It also protects the thin and bendable moped license plate.
Moped License Plates have different shapes depending on the municipality. The recently popular local moped numbers are often of a unique shape. Plate holders with raised edges cannot be installed. It is advisable to check the shape of the number before purchasing.
Basically, when you buy a new car, you also get a new License Plate. New plates look good on new cars, so I buy a new Plate Holder every time I buy a new car. I am planning to change the color of the Number to Pink in the near future, so I will buy a new one in a new color. It comes with Washer, but the price is not too expensive, so it is very helpful.
View detail
Metallic feel is very elegant!
Installed on YB-1FOUR.
It prevents the License Plate from bending, and matches well with the Chrome plating Fender.
View detail
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
Simple but well-made License Plate Bolt
I bought it for Dress-up for One point.
The screws on the license plate are the same for all car models, so I think it will fit most large car models.
After several years of use, the color has not deteriorated and there are no bald spots.
Parenthesis has a simple structure with a slit design that is compatible with other PremiumZone products.
View detail
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
DAYTONA for peace of mind
Since I installed the Fender Eliminator Kit, I wanted to change the License Plate Bolt as well, so I bought it. I bought the blue color to match the color of the car body, but the anodized blue color is also shiny and matches well with the car body. View detail
Fits: Others Universal
To prevent unexpected bending.
[How is it used?
It took some time to restore the LITTLE CUB that was given to us by hanghang, but we managed to get it into shape and acquired the numbers for public road driving.
Was the one you received as per Image?
It is not a type of holder that protrudes a large amount from the perimeter of the license plate, but a type that works quietly on the reverse side of the license plate, so it was exactly what I had imagined.
Was the installation difficult?
Bolt and Nut in 2Quantity:Set Loosen and remove the License Plate, insert this product into the NumberReverse side, and tighten the supplied bolt from the rear side with the nut.
This is a Custom that can be done by even beginners in Motorcycle maintenance.
How was your experience with it?
Quantity:Pair (for Left and Right) and the Holder protrudes just a little bit on the underside, but it looks great.
In my case, I purchased the black color, but I felt it was tasteless, so I put Carbon Style Decal on it. It is not noticeable at all, but it is enough to satisfy my self-satisfaction.
[Included Parts:were they on?
License PlateStabilizer (aluminum plate with cut-outs) Body and 2 quantities of Bolt and Nut for License Plate fixation.:Set, for preventing resonance caused by vibration? UrethaneTape is included in the package.
[Was there anything that disappointed you?
Personally, none at all.
If you want to make it stand out even more, there is also a lineup of types with edges, so please check out Webike's product introduction section for more details.
Other items that would be helpful
Point and hang of installation
The holes for fixing the bolt on the License Plate Stabilizer side are slightly larger and wider, so please adjust the holes to your liking when installing the number and bolt to the car body together with the number.
Installation with proper Torque management.
When installing in a vehicle with a lot of vibration, it may be safer to apply Screw lock agent to the nut on the back side or replace it with a Lock nutType nut.
[Availability and clarity of the Instruction Manual
I think a simple Installation Instruction Manual was included...sorry my memory is a bit fuzzy.
I think it is a top level product in terms of ease of understanding.
[Points to note]
As I mentioned above, it is about proper Torque management.
Install it securely so that it will not fall off while driving.
[ITEMS TO BUY TOGETHER
There is no shortage of basic installation with this product alone.
As mentioned above, consider using Screw lock agent or lock nut as a self-protection measure when used on a vehicle with a lot of vibration.
Opinions and requests to Manufacturer.
The abundance of trapezoidal and rectangular types and lineups is very helpful when making purchases.
View detail
Fits: Others Universal
with Reflector Black
Easy to install with good design and product precision.
The vehicle on which the SlightRear Fender was installed is a Z900RS with ARCHI's SlightRear Fender.
The number base that comes with the SlightRear Fender is designed to be installed using an OEM reflector, but the OEM reflector was not the right width for my taste, so I purchased this product with a narrower reflector instead.
The supplied Bolt nut and FlangeSpacer were not used because different ones were installed.
I did not use the urethane sponge, but I am satisfied with the appearance of the Image without any resonance.
View detail
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
For Dress-up
PREMIUM ZONE License Plate HolderQuantity:Set and
DAYTONA lightweight License Plate Holder for 126cc and above at the same time
Purchase
I am satisfied with the dress-up.
View detail
Fits: Others Universal
To prevent LicenseNumber bending
I bought this to prevent LicenseNumber bending.
As for the work, remove the LicenseNumber (10mm Nut).
Install with Holder
View detail
Fits: Others Universal
For reinforcing License Plate
The license plate was installed as a reinforcement for the Fender Eliminator as per the product. View detail
Fits: Others Universal
No concerns about License Plate
I bought the Reflector to stabilize my squishy License Plate. It is easy for anyone to install. 。
To prevent the Plate and Holder from squeaking and squeaking, a rubber plate is attached between the Plate and Holder, but it is a little thick and not so good.
View detail
Fits: Others Universal
More than I expected
I kept in mind the various comments, but the actual product was of good quality and exceeded my expectations.
I purchased the License Plate in hopes of protecting it as much as possible.
View detail
Fits: SUZUKI V STROM 1050, SUZUKI V STROM 650
DAYTONA's License Plate Holder
[How is it used?
When I was walking around the body of the car during the delivery description, I hit my knee on the Number and promptly bent it. It was very Shocking and I wanted to get a Holder.
Was the one you received as per Image?
The board is 3mm thick and quite sturdy. The color is also good as it is Black, a tightening hue.
Was the installation difficult?
No special skills are required. The mounting hole is also a LOOSE hole.
How was your experience with it?
There is no need to worry about hitting someone and injuring yourself. The plate hole on the side is especially useful as a place to hook a touring net.
[Included Parts:were they on?
None
Point and hang of installation
In my case, the existing bolt length was not enough due to the thickness of the license plate and the plate for installing the DriveRecorder. (Photo ?) So, I used M6×20 GoldQuantity:The Nut is an existing one. To be safe, a screw stopper (weak) was used in combination.
View detail
Fits: SUZUKI GSX-S750, HONDA CBR500R, YAMAHA YZF-R3, HONDA CB500X, HONDA CB150R, HONDA CB300R, YAMAHA YZF-R25, YAMAHA XSR900, SUZUKI GSX250R, SUZUKI GSX1300 HAYABUSA, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-R125, KAWASAKI VERSYS-X 250, HONDA PCX125, HONDA NC750X, HONDA CBR650R, HONDA CBR650R, HONDA CBR400R, HONDA CB650R
One for One point
I purchased the color that matched the body color for one point around the rear. View detail
Fits: Others Universal
Not only does it protect the License Plate, but it also looks GOOD!
[How is it used?
It is installed under the 250ccMotorcycle License Plate.
Was the one you received as per Image?
It was very nice!
Was the installation difficult?
A Hexagonal Wrench and Spanner are all that is needed for installation.
How was your experience with it?
I like it very much.
[Included Parts:were they on?
Four Seals for vibration isolation and Attachment for Bolt and Bolt were included.
[Was there anything that disappointed you?
Not particularly
View detail
Fits: Others Universal
License Plate Holder
The unrefined License Plate becomes stylish,
I am satisfied.
View detail
Fits: Others Universal
I'm glad I bought it
I purchased this product because someone hit my Number and bent it. It was a good purchase, thinner and more solid than I had imagined.
It was easy to install.
View detail
Fits: Others Universal
To prevent the License plate from bending
I bought it to prevent it from getting caught on the License Plate when applying the Cover.
It's a small thing, but it's also a dress-up.
View detail
Fits: Others Universal
For those who want to wear a Slim Reflector.
ReflectorSince even a Single Body costs about this much, this price is inexpensive for a Number pedestal and a discreet reflector.
The Bolt is also inconspicuous, and the look and feel of the Bolt is much more stylish.
View detail