Reviews
Stability increase
When I ran at high speed etc the wind was hit and it was pretty tired or I was scared, but with Windshield attached, I could afford to leave and it became easy.
Just being bent forward is likely to hit the eyes and I am scared.
Holder is also useful because it has a bar attached
Fine adjustment of the angle is required for installation
View detail
It is a Recommendation item for 1400 GTR in the previous term
As Screen became Large, the wind that hit Helmet became fewer even for me of the body 178 ?, making Income call easier to hear even in 110-run. Was the wind flowing better as a whole? It is easy to run with not being cold in winter running. View detail
Bracket - - - -
Because the Shield itself is well done, there is a feeling that it is ruined because the Fit feeling is bad with chat bracket and the vibration also goes out considerably. As a product it is a very regret goods. View detail
It was almost as expected.
I installed it in PCX 2016.
Summer was good but I headed for the winter season and my feet are a bit cold so I found this item when I checked the countermeasure
Easy to impress (Impressions) I will write
1. First of all, Quantity : Pair (for Left and Right) I also looked at the side OEM I want to see Exactly fit without any gaps.
2. Installation was unexpectedly easy, but the bottom treatment wiped the surface gently with a mild detergent and dried before installing
3. Protecting the surface Although it was stripping off and peeling off Seal, you need to be careful not to scratch it when peeling it off
4. I peeled a little strong Seal of adhesive and pushed it little by little to paste it on the examination, but I carefully stretched it so as not to be Gap
5. After installing One Side, it will float unless you hold it down enough - - - It is warning because it floats considerably
I pressed it firmly from top to bottom several times.
6. After finishing installing Both Sides, I checked the float by the final check and pull a little to see if it could peel off
Although installing a little care is necessary, it was able to install safely.
Although it is imp of running, it is impression of running lightly in the neighborhood, but although the hem of Pants was swinging with the wind until now it seems that there is a considerable fitting effect.
Since I am not running at high speed yet, there is no impression on that point, but I think whether it can be expected if it is this minute
This time it was written for Screw stopper for safety, but this time it was installation with adhesive tape, but if there is something to be off, I think whether you have to consider Screw stopping.
View detail
Cost performance highest
【What made you decide the purchase?】 : Low price
【How was it actually used?】 : Wind pressure per chest dramatically decreases
【Was it difficult to install? (Hard parts case)】 : Bracket and Set so I put it on
【Please tell me the point of installation and hang (in the case of Hard parts)】 : Since there is BALI in Bracket, it is good to curb two people or Shield for scratch prevention
[Is there anything I was disappointed about?] : I can not adjust the angle of Shield
【Hope for Manufacturer - Please let me know if you have any improvement points] : Since it is also optional, Spacer for more angle adjustment & more Long version
【Have you compared items?】 : Road Comet (CHIC DESIGN)
[Others] : Even if you drive at high speed it will not shake! (Shield is thick)
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
A little Parenthesis I got better.
Since MONKEY is in a riding posture, rectification effect can not be expected at all (Lol) But it looks better than I thought.
It is awesome as a sun shade for Meter.
View detail
To those who place importance on appearance
We changed this product from windshield of around 10,000 yen.
Although the texture is good, the rectification effect is not as high as expected, the wind hitting the body is less, but the wind from the neck to the top is quite good. Height is 170 cm, but it is a bit difficult Level to raise Jet helmet's Shield.
Shield's length is nearly the same as the cheapest draft shield before change, but the effect of the wind prevention on the head is very different with inclination, and other products are recommended if emphasis is placed on the effect of wind protection.
I think that I will look at the state as it is for a while because the texture is expensive as it is, but it may return to the original cheap windshield when it gets cold in earnest.
View detail
Fits: KAWASAKI Z125 PRO, Others
Screen of just right Size
It installed in CRF 250 L.
Although it is commonplace, I think that it is a good product.
Although it takes time to trial and error how to fix the mounting position,
I think that installation can be done in 30 minutes.
(Because I was able to leave it to Shop usually)
However, when installing, Hexagon Socket Bolt stops Screen and Bracket
I was a little puzzled by what was the Inch standard.
Installation In the Instruction Manual and the parts list there was nothing mentioned.
I ran to buy Inch standard Hexagonal Wrench to Home center.
Please be careful when you purchase
View detail
It was correct and installed
About installation
- Required tool
10 mm Double-end Wrench Quantity : 2 pc, 12 mm Double-end Wrench, 13 mm Socket wrench (Although 13 mm Glasses is OK, it will be difficult to obtain) , 4 mm Hexagonal Wrench.
- installation method
You can do it according to the Instruction Manual, but it is easier to work if you change only one place. According to Instruction Manual Shield Body "ShieldBracket" When "AdjustBracket" After installing "Handlebar Clamp" It is fixed with Bolt to. But this approach is quite difficult with one person's work.
So change it like this. In Shield "ShieldBracket" Only, "AdjustBracket" It is "Handlebar Clamp" I will temporarily fix it. Finally "AdjustBracket" When "ShieldBracket" To overlap and fix. Once the position of the shield is decided, once you finish tightening each part, it is finished.
- Others
This product can adjust the angle of the shield's angle within the range of 10 degrees. But in the most occuring position "ShieldBracket" When "AdjustBracket" Is the smallest area and the vibration and the wind become considerably large by the influence of Engine and wind. In the state that it is the most laid, the mating surface of the two Brackets becomes the largest Large and vibration is considerably reduced. Also, I think Shield looks better if it is the most sleepy.
This Windshield seems that Grom's car rank got up one by one.
Impressions of running
I realized that the actual size is bigger than the image. The height of Windshield almost reaches the upper end of Back Mirror. My height (170 cm) The usual Riding form prevents the wind to the chest and abdomen. In the lid body, only the Helmet goes up from the upper end of Windshield. It does not interfere with vision in every situation.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
Beautiful
I attached the VisorBlack color of Chinese Manufacturer before but because of Universal Bracket was not good and could not fit properly.The appearance was also Black and the visibility was bad, DAYTONAAero VisorMINI says it by car type and DAYTONABrand Things to purchase for those who are planning to purchase, while paying attention to overtighting of Bolt, while paying attention to not to scratch the Visor at the time of installation, for other users to point out installation Please, look good is very Parenthesis, but please do not expect too much wind (^_^) View detail
Large Satisfactory Screen
Material is also thick and firm. There is a considerable height, but for me who seek windbreaking performance better than dressing it is undisputed performance. It sounds like a bit pushed from the back like BMW. I am not tired even after long touring. This Recommendation. View detail
Wind removal effect? ??Visual effect 0
Try using it last autumn
Although it is easy to install with the size that covers the periphery of Meter of CROSSCUB, because Shield is easy to twist at the time of tightening Screw, it takes time if less tools are needed, and the mounting position of Mirror changes on Bracket, so the Mirror width is slightly narrow It becomes bad after reflection
The vibration caused by the vibration is as it is, but it is not terrible not to bother running
As a result of the Size, the amount of wind that corresponds to Helmet increases, the wind cutting sound gets annoying, in the winter, cold air comes around the chest firmly and it cools down and it gets firmly wet if it rains.
Since it looks solid, it is effective as a Dress-up product Large
View detail
It is even better when it rains
There was a PCX in First Model Type until now
I finally installed it because it was not in the Second Type Model
Fit feeling is preeminent and it will not last until Limit
Is it a good sea plum to say
Just as Double-sided Tape hits the part of the solid surface of Curve
It can be added immediately
Tapping screw is included but I did not install it
The Instruction Manual is also attached, and the installation method is also written
The wind at your feet will also weaken, and flow into the snake at the time of rain will also
Prevent. It seems to be active in winter
View detail
Fits: YAMAHA MAXAM, YAMAHA MAXAM, YAMAHA MAXAM, YAMAHA MAXAM, YAMAHA MAXAM, YAMAHA MAXAM, YAMAHA MAXAM
Satisfied with windbreak effect and texture.
Size is bigger than I thought, there is also windbreak effect than I expected, Large I am satisfied satisfied. Almost no wind hits the body. If the price is a little cheaper it is five stars but I think that I could do a good shopping. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
Satisfied just with attachment
This Visor is pretty sturdy.
Bracket is also exclusive and perfect for MONKEY.
I think that Large kimono is well done well.
However, I am a little worried about how far it can be tightened when installing on Bracket.
When it tightens too much, it seems to crack.
I do not think about anything like that it will be less resistant to wind.
It's really just a look.
I am satisfied with that..
View detail
Fits: HONDA CB1100 RS, HONDA CB650R, HONDA CB650R, Others
The effect is somewhat
Compared to normal Blast Barrier, the angle of X is sleeping as much as the normal Blast Barrier, but of course windproof is inferior, but CB 400 SFetc. , When installed in the Naked motorcycle, it will be easier for Large. Parenthesis looks nice as well!
Meteretc. When it interferes with Spongeetc. Also included is GOOD.
If you mention disadvantages - - Since Windshield itself is large-scale, Chatter sound is generated in a specific rotation range.
As with the NC 39, the headlight lens is three pointed vehicle is maintenance is inferior in feeling?.
When installing, read the instruction manual and tighten with the proper Torque. Anyway, DAYTONA's explanation theory - - - After thinking it, it was possible to distort the Screen with Torque too much. Installation attention!
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
DAYTONAAero Visor
I also used GORILLA, so I purchased DAYTONAAero Visor for MONKEY this time as well.
The deciding factor of purchase is just cool It is just that.
View detail
it is good for looking, it can be cover the water on raining, it no need to cut the fairing to install, it still very easy to install
it is good for looking, it can be cover the water on raining, it no need to cut the fairing to install, it still very easy to install View detail
I felt windproof effect more than I thought
I am wearing it a while ago..
Because it is a person who starts working without reading Instruction Manual so much, Quantity : Pair (for Left and Right) It took extra time due to wrong direction or wrong direction.
If you were reading the Installation Instruction Manual first, you could have completed work on Smooth.
The windshield seems to be bad, but now I think that the product is Stylish.
The dissatisfaction at this point is that the body mounting part (Original Mirror root) There are no hidden parts such as RubberBoots in.
I attach the original Mirror to the Bracket, but you can see the lower screw.
Today I ran less than 200km.
Although I ride in a few months, the wind that hits the body obviously is getting less.
It may be natural because it is Windshield, but it does a better job than I thought.
Large satisfied with windproof effect.
By the way, I am sleeping in the adjustment range.
There are points that I was interested in.
Bow to accelerate and hit Helmet's Shield to Windshield.
Well, is this any help?
Windshield I will try to attach Door Mole for Vehicle so that it does not damage Helmet 's Mirror shield.
View detail
Match on the car body
I installed it in BONNEVILLE, but I will not let you feel that I am wearing it without breaking the style. I am wearing Bike Cover, but too much has no effect on Length. I have never compared anything else but I think that the wind is preventing until the chest. View detail