Reviews
Fits: HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA XR50 Motard, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 50, HONDA Ape 50, HONDA XR50 Motard, HONDA XR100 Motard
Easy-to-use Handlebar
I used it on 3 different vehicles. I used this handlebar on 3 different vehicles and it worked well even though the vehicles were of different sizes. cb400sf can pass the inspection as it is. View detail
Fits: HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA XR50 Motard, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 50, HONDA Ape 50, HONDA XR50 Motard, HONDA XR100 Motard
Good Fit feeling of Balance
Quantity:This is my second one, and it can be used on any type of vehicle. One is CB400SF and it is close to the shape of STD Handlebar and it is passable for vehicle inspection. The quality is good and there is no problem with the quality. The second one is used for GROM this time. Personally, I found the height of the STD Handlebar too high, so I considered changing it. I noticed later that other people were also using it. I don't like wide handlebars, and I have a hard time using one that is too high. This is a good handlebar that solves these problems. There are similar products, but for me, this is the best recommendation. View detail
Fits: HONDA Rebel 250, HONDA Rebel 250, HONDA REBEL500, HONDA Rebel300
It is quite good with HondaREBEL250!
Position is a little easier as mentioned in the other Impression. I have not driven at high speeds, but the vibration is definitely less at normal RPMs and above on the street. I have not driven it for a long time, so I think I will be able to give my impression of it in a little while. View detail
Fits: HONDA Rebel 250, HONDA Rebel 250, HONDA REBEL500, HONDA Rebel300
It is best to use it after understanding its characteristics
The OEMHandlebar on the REBEL250 seemed a little far away,
The balance between the seating position and the footpeg position does not seem to be good.
This product will have the handlebar position adjusted forward and higher.
Position is different for each person, so if you want to make such an adjustment,
I can recommend it
Installation was not particularly difficult by referring to Youtube videos.
The cable can be used as it is in the NORMAL product, but the BraceHose is not so easy to handle.
The handlebar lock is too tight, and the handlebar is too tight in the Handlebar Lock state,
It is not suitable for those who always use Handlebar Lock.
View detail
Fits: HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey
เป็นแฮนที่ใช้งานได้อย่างดีจับสบาย View detail
Fits: HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey
แฮนด์ ทรงสูง DAYTONA ระยะความสูงความกว้างกำลังดีเลยไม่เมื่อย ใสแล้วรถดูสวยขึ้น ตัวงานอลูมิเนียม แนะนำสีเงินครับ View detail
CustomPoints that cannot be removed
I was able to install it on a vehicle with ABS by changing the hose routing (work at your own risk). (The handlebar is now in my hand and I can position it easily and lock and lock the handlebar with ease. View detail
Fits: YAMAHA MT-07, Others , YAMAHA MT-09
PositionChange to a forward leaning posture.
The position has been changed from the NORMAL upright posture to a slight forward lean, which is highly recommended because the front load is moderately increased, making it easier to take a cornering posture. Also, since it can withstand acceleration G, it is easy to cope with unexpected behavior.
The texture is very nice and in line with the price.
I always use Webig because it is easy to check the compatibility of the model, although there are not so many registered models.
View detail
Fits: HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey
สินค้าและบริการดีมีมาตรฐาน แล้วจาใช้บริการอีก View detail
The VERY BEST in customer service!
I am very impressed with the incredibly fast service! The Daytona handlebar set made in from Japan to Albuquerque, New Mexico in just SEVEN DAYS!! The handlebar set is precision made from high quality materials and stainless steel hardware, faultlessly anodized. Installation was straight forward. I have just one concern about the finished job: the position of the bars cause a very tight bend in the clutch cable at the lever. I believe the cable must have a friction free lining, as it still works fine. Overall, I'm very satisfied with the Daytona kit, because it solves the ergonomic issues I had with the stock bars. Many thanks to Webike for your superior service!! View detail
Change to Separate handle style position
The gsr750 has a unique tank shape, so the handlebar selection is quite large…
I wanted to use a Pipe Handlebar with a tighter aperture and a lower profile.
It still interferes with the full lock.
I thought about Swallow or Condor.
I didn't like the design and texture a bit.
I was looking for something.
DAYTONARoadSteering found!
With Aluminum Cut-outs
Rugged and Cool?
That's why I bought it.?
I installed it as soon as I could.
Brake hose hits Meter…
Accelerator Wire is also a bit tight…
For now, we have responded with Handlebar riser.
Also, if you turn it over or move it up or down in the fixed position, it's subtle.
Position adjustment is also possible.
I think it is a well-made product.
I put it on and ran a test run.
It's not as tight as the SS, but it's a reasonable front load and doesn't sacrifice street driving that much, but it's not as hard as the SS.
Pleasant turns on the pass.
I think it turned out to be a pretty good Handling.
It may be more straightforward than NORMAL.
In the case of gsr750, if you change the brake hose routing
I can make more adjustments, so I'll try again.
View detail
DAYTONA DAYTONA 50B Handlebar
I am satisfied with the Position, which is better than I expected. View detail
Fits: HONDA Rebel 250, HONDA Rebel 250, HONDA REBEL500, HONDA Rebel300
Recommended for those who want to make the Handlebar far away from the Bar End.
Since I was not confident that I could replace it myself, I asked a local Motorcycle shop to do it for me.
To be honest, I didn't think there would be much change, but the handling has improved tremendously. Also, since it has been processed with a hole, the replacement itself seems to be easier than with a normal handlebar. I am glad that I replaced it.
View detail
Fits: HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA XR50 Motard, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 50, HONDA Ape 50, HONDA XR50 Motard, HONDA XR100 Motard
pretty good
I'm in my ideal Position, and Large satisfied!
The moderate Sauce angle and aperture of the handlebar made driving easier.
Installation is very easy, just replace the OEM handlebar. It takes a bit of hang to remove the grip, but if you insert a long slotted screwdriver and grind it out, it comes off surprisingly easily. To install, just put double-sided tape on the handlebar, sprinkle some Brakes cleaner on it, and stick it in while it's still wet, and it will go right in.
View detail
GOOD in exquisite position.
[How is it used?
I installed it on MainMotorcycle's XJR1300C. Since the STD Handlebar is a 28.6mm Fat bar, I used a 22.2mm Handlebar Post (part number:03024-BK) with 5mm Up/9mm Back post from Antlion.
Was the one you received as per Image?
To be honest, I felt the aperture was less than the Image and that it was surprisingly low.
But as it turned out, the first Image was overturned. In a good way.
Was the installation difficult?
Replacing the handlebar itself was not difficult, but drilling holes for the switch box and throttle holder was troublesome.
Because it is steel, it is not as easy to drill holes as aluminum. Once positioned, I drilled three holes in three stages, starting at about 3mm, then 4mm, and finally 5mm.
I was able to drill holes with a Bosch rechargeable drill sold at Home center and a cheap steel drill blade.
Once you drill the hole, don't forget to apply rust inhibitor because it's STEEL!
How was your experience with it?
It was the Pipe Handlebar from Separate Handlebars, very nice!
I went on a one-day touring trip of about 250 km, and I was not tired, and the position was perfect and easy for riding.
Also, Handlebar itself is quite heavy because it contains Weight, but vibration has almost disappeared.
This alone eliminates numbness in the hands when driving at high speeds and is psycho.
The Bar End can also be used with any M8 bolt fastener, so there is a wide range of options. Although not yet installed in the photo, we plan to install a Babyface Bar End.
I also ran Winding at Izu Skyline and it was easier to ride than Separate Handlebars.
If I were to ride XJR, Pipe Handlebar seems to be the right choice.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
There is an RCM-specific Sticker attached to the HandlebarCenter, but it was bent....
Well, if you don't like it, just peel it off, but personally I was disappointed.
View detail
Fits: HONDA Rebel 250, HONDA Rebel 250, HONDA REBEL500, HONDA Rebel300
Perfect for level 500 Good Very good
Perfect for level 500 Good Very good ------------------------------------------ ---------------- It's perfect for Rebel 500. Powered by Google Translator View detail
Fits: HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA XR50 Motard, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 50, HONDA Ape 50, HONDA XR50 Motard, HONDA XR100 Motard
Exquisite Handle position
This is the third handlebar I have used, OEM, MORIWAKI, and DAYTONA, and this DAYTONA is the most comfortable for me.
I think this is because I have installed Rear Sets and my seat position is now further back than usual, so the exquisite angle of the Daytona handlebar suits me. Especially, the angle of the handlebar when the Motorcycle is inverted at the Corner ring is very good, and I am satisfied with the Large size that I can run the Corner more enjoyably than before.
View detail
Changed from Drag bar in Rizoma
I changed from Rizoma's Drag bar which is very hard for Touring. By the way, I changed the Handlebar Post to an external one.
Even though the height of the handlebar is reduced and the mounting angle is almost vertical, the aperture angle makes it look sporty.
The immediate effect of leaning forward while propping up the arms is worth the change from the fatigue-accumulating waist-destroying Handlebar, and the aperture makes it easier to handle in town riding because you don't have to prod your arms, and it is also easier to ride on mountain passes because you can feel the Motorcycle's movement.
View detail
very good
It comes 5 cm closer to the front, which makes it more maneuverable. View detail
Fits: YAMAHA MT-07, Others , YAMAHA MT-09
High-grade BilletHandlebar
Purchased Universal Type for changing the position of my Kawasaki Z1000.
The finish was very clean, no BALI, no bumps, etc.
If possible, it would be 5 stars if the Handlebar's texturing re angle could be variable.
View detail