Reviews
Fits: HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA XR50 Motard, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 50, HONDA Ape 50, HONDA XR50 Motard, HONDA XR100 Motard
Good Fit feeling of Balance
Quantity:This is my second one, and it can be used on any type of vehicle. One is CB400SF and it is close to the shape of STD Handlebar and it is passable for vehicle inspection. The quality is good and there is no problem with the quality. The second one is used for GROM this time. Personally, I found the height of the STD Handlebar too high, so I considered changing it. I noticed later that other people were also using it. I don't like wide handlebars, and I have a hard time using one that is too high. This is a good handlebar that solves these problems. There are similar products, but for me, this is the best recommendation. View detail
Fits: HONDA Rebel 250, HONDA Rebel 250, HONDA REBEL500, HONDA Rebel300
It is best to use it after understanding its characteristics
The OEMHandlebar on the REBEL250 seemed a little far away,
The balance between the seating position and the footpeg position does not seem to be good.
This product will have the handlebar position adjusted forward and higher.
Position is different for each person, so if you want to make such an adjustment,
I can recommend it
Installation was not particularly difficult by referring to Youtube videos.
The cable can be used as it is in the NORMAL product, but the BraceHose is not so easy to handle.
The handlebar lock is too tight, and the handlebar is too tight in the Handlebar Lock state,
It is not suitable for those who always use Handlebar Lock.
View detail
Change to Separate handle style position
The gsr750 has a unique tank shape, so the handlebar selection is quite large…
I wanted to use a Pipe Handlebar with a tighter aperture and a lower profile.
It still interferes with the full lock.
I thought about Swallow or Condor.
I didn't like the design and texture a bit.
I was looking for something.
DAYTONARoadSteering found!
With Aluminum Cut-outs
Rugged and Cool?
That's why I bought it.?
I installed it as soon as I could.
Brake hose hits Meter…
Accelerator Wire is also a bit tight…
For now, we have responded with Handlebar riser.
Also, if you turn it over or move it up or down in the fixed position, it's subtle.
Position adjustment is also possible.
I think it is a well-made product.
I put it on and ran a test run.
It's not as tight as the SS, but it's a reasonable front load and doesn't sacrifice street driving that much, but it's not as hard as the SS.
Pleasant turns on the pass.
I think it turned out to be a pretty good Handling.
It may be more straightforward than NORMAL.
In the case of gsr750, if you change the brake hose routing
I can make more adjustments, so I'll try again.
View detail
GOOD in exquisite position.
[How is it used?
I installed it on MainMotorcycle's XJR1300C. Since the STD Handlebar is a 28.6mm Fat bar, I used a 22.2mm Handlebar Post (part number:03024-BK) with 5mm Up/9mm Back post from Antlion.
Was the one you received as per Image?
To be honest, I felt the aperture was less than the Image and that it was surprisingly low.
But as it turned out, the first Image was overturned. In a good way.
Was the installation difficult?
Replacing the handlebar itself was not difficult, but drilling holes for the switch box and throttle holder was troublesome.
Because it is steel, it is not as easy to drill holes as aluminum. Once positioned, I drilled three holes in three stages, starting at about 3mm, then 4mm, and finally 5mm.
I was able to drill holes with a Bosch rechargeable drill sold at Home center and a cheap steel drill blade.
Once you drill the hole, don't forget to apply rust inhibitor because it's STEEL!
How was your experience with it?
It was the Pipe Handlebar from Separate Handlebars, very nice!
I went on a one-day touring trip of about 250 km, and I was not tired, and the position was perfect and easy for riding.
Also, Handlebar itself is quite heavy because it contains Weight, but vibration has almost disappeared.
This alone eliminates numbness in the hands when driving at high speeds and is psycho.
The Bar End can also be used with any M8 bolt fastener, so there is a wide range of options. Although not yet installed in the photo, we plan to install a Babyface Bar End.
I also ran Winding at Izu Skyline and it was easier to ride than Separate Handlebars.
If I were to ride XJR, Pipe Handlebar seems to be the right choice.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
There is an RCM-specific Sticker attached to the HandlebarCenter, but it was bent....
Well, if you don't like it, just peel it off, but personally I was disappointed.
View detail
Fits: YAMAHA MT-07, Others , YAMAHA MT-09
High-grade BilletHandlebar
Purchased Universal Type for changing the position of my Kawasaki Z1000.
The finish was very clean, no BALI, no bumps, etc.
If possible, it would be 5 stars if the Handlebar's texturing re angle could be variable.
View detail
It's like coming to the front and Up.
The user is a partner who is 155 cm tall.
She said that the STD Handlebar on the Rebel 250 is too far away for women, and that it is painful to sit closer to the front of the Seat.
This Handlebar is like an STD Handlebar brought directly to the front, so it is easier to operate at smallest intersections and UTurn.
However, the grip position is a little high for women who are not strong enough to handle the small size, and their shoulders seem to get sore.
I would appreciate it if it were a little lower, but it seems structurally difficult because of the high position of the Tank.
View detail
Fits: HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey
Looks good and sits well in the hand
I mounted these on my tuning honda monkey baja. This one sits well in the hand and provides a positive seating position. The handlebars are not too narrow and not too wide. very good View detail
Nice design
Nice set of handlebars. Great OEM replacement. Clip-on design but not as aggressive as actual clip-ons. Chose this over the Rizoma Race Retro handlebar. Only issue I find is that it's not exactly as pictured. There is a "Daytona" stamp on the handlebar that's not pictured on sample picture. Also the bolts are a little different than pictured as well. Overall satisfied with quality. have to wait until spring season to see how they ride. View detail
I bought it to install the Hand guard.
When I tried to install the hand guard on the DF125 DJEBEL, I found that the OEM Handlebar of the DJEBEL was not able to be installed near the Bar End.
It's not hollow, but solid, so it can't be installed as it is. "As close to OEM Position as possible. so
"Steel" so Cheap (This is important.) I was looking for something and I found this product.
I was able to install the hand guard without any problem, but the handlebar was squeezed larger than OEM, and the grip part retracted.
I think it makes my back stretch backwards and I don't get tired even if I ride for a long time.
However, there is one problem:when the Handlebar is turned all the way to the Right, the Accelerator Wire seems to be pulled a little.
Engine RPM will be increased. Countermeasures. "Wire adjustment or routing change. Or
"Replace the accelerator wire with a longer one. You may need to
View detail
50B Handlebar Exchange Bolt
It was a very good item for rumors. I went to Touring about 200 kilometers the other day. As usual, when I got a little longer, my shoulder and back were getting sore, but although I got hurt after the exchange, I could drive comfortably. The installation was completed by one person.
I would recommend it..
View detail
Fits: HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA XR50 Motard, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 50, HONDA Ape 50, HONDA XR50 Motard, HONDA XR100 Motard
Because it broke and the Handlebar bent
SHIFT UPEuro Replacing from the Motor bar.
I selected a thing of Pandor with with Brace as it is attached variously around Handlebar.
The installation is due to the fact that there is a slip groove in Handlebar Holder Quantity : Pair (for Left and Right) Length of Let's etc. I was able to fit it and it was easy to install.
I feel that Position has become somewhat easier than before. Since the Handlebar width fell to the Large width smaller than anything before, it was best that the escaping became easier, but it is a difficult point that Mirror became difficult to see by that amount.
View detail
I will attach it to Bolt!
I write because the goods arrived. I was confident that this attitude of riding with Handlebar would be easier, I'm looking forward to it. I feel excited like an OEM Product, I do not think there is any change in Large, I am looking forward to it. View detail
Fits: HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA XR50 Motard, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 50, HONDA Ape 50, HONDA XR50 Motard, HONDA XR100 Motard
Since the width of the pure handle of Ape50TypeD was wide, it purchased. Since it was a product made of a duralumin, it was light, and the problem in particular did not have attachment, either. Part operation to which width became narrow became ea
Since the width of the pure handle of Ape50TypeD was wide, it purchased.
Since it was a product made of a duralumin, it was light, and the problem in particular did not have attachment, either.
Part operation to which width became narrow became easy, and although an authentic positive one was silver, it was written to plating, and it acted as Kougami also of the appearance substantially.
View detail
Fits: HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA XR50 Motard, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 50, HONDA Ape 50, HONDA XR50 Motard, HONDA XR100 Motard
It attached, when the axle part of an ape was diverted to a little cab. Structure is very good. The logo of a daytona is contained in Bar's middle. Although the size purchased MID, it is carrying out firmly and sense of incongruity is not ofte
It attached, when the axle part of an ape was diverted to a little cab.
Structure is very good.
The logo of a daytona is contained in Bar's middle.
Although the size purchased MID, it is carrying out firmly and sense of incongruity is not often manipulable, either.
Unlike the pure handle of an ape, it is glossy, and very beautiful.
View detail
Fits: HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey
Height is almost the same in it being pure. A remarkable weight saving is made and appearance is also a stylish. Since handle width decreases a little, it is not for [ which carries out an off run ] persons, but if it is an on-main, there is also
Height is almost the same in it being pure.
A remarkable weight saving is made and appearance is also a stylish.
Since handle width decreases a little, it is not for [ which carries out an off run ] persons, but if it is an on-main, there is also no problem.
a custom -like blaze -- satisfaction -- it may be high.
View detail