Reviews
Fits: KAWASAKI Ninja1000, KAWASAKI Z900, KAWASAKI Z800, KAWASAKI Ninja1000SX, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja650, KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI Ninja ZX-25R
It is easy to install. and the visibility has increased!
It is easy to install. and it gives me a wider field of view and helps me when changing lanes. one drawback is that it is not easy to remove. View detail
Silver insert color is nice.
Installed in conjunction with Grip replacement.
Since the motorcycle has many plating parts on the body, silver was selected as an accent to the handlebar's black.
The color is good and the Silver looks good.
We considered heavier products, but chose this product with less thickness considering the width when parking.
View detail
Fits: YAMAHA DRAG STAR 400, YAMAHA DRAG STAR250, YAMAHA MAXAM, YAMAHA SR400
I am satisfied with the design and price.
Installed on SR400Final edition.
I liked the design of the OEM Mirror, but I had trouble with the narrow field of view, the angle of the Mirror was difficult to adjust, and the installation screws were loose, causing the Mirror to rotate downward while driving. After installing this product, the screws no longer come loose and the angle can be adjusted in a wide range of motion, so I have good visibility.
I like the Square Type design, which looks like early SR.
One drawback is that while it is easy to adjust the angle, the angle changes with the weight of the cover, so it needs to be adjusted each time before running.
The price is reasonable and overall satisfaction is high.
View detail
DL1000 V-STROM250SX exclusive DAYTONA Hazard kit installed
I was looking for a Hazard switch for my DL1000 V-STROM250SX, and when DAYTONA came out with a switch kit for the 250SX, I immediately went to Webike and bought it. As expected of a dedicated kit, there is no extra wiring, no cutting or pasting of wiring, and I was able to install it without worry. Now I can use the hazard lamp on the highway with no worries! Personally, I believe that motorcycles are safer when they are well lit and stand out. View detail
If Switch Refreshing,
It would be perfect if the Switch could be embedded! View detail
Less blurring.
[How is it used?
Mounted on GSX-S750
Was the one you received as per Image?
As per Image. Firm and solid.
It is lower, but the visible range is the same as OEM etc.
If I could adjust it well, I could see a wider area than the OEM,
I'm not very good at adjusting Mirror ….
Was the installation difficult?
Installation itself is simply a matter of turning the hexagon.
How was your experience with it?
OEMMirror was getting scared fast, so I replaced it and it is better.
However, this too starts chattering at about 120 km/h.
[Included Parts:were they on?
Screws necessary for installation are included.
Right is also Opposite Thread Screw.
[Was there anything that disappointed you?
When you are scared, you really feel like you can't see anything.
Other items that would be helpful
Installation Point or hang
Right makes Washer a Quantity:1 pc. with a masquerade
There is no longer any interference with the OEM's Brake master.
But I don't feel like I'm stopping with Snap.
important point
Quantity:Pair (for Left and Right) Quantity as the same:2pc. When I purchased the Set, it was Shape of Right & Left Differ number.
Screw lock agent required.
View detail
The shape and reflection are fine, but ...
This is a comparison with AZMirror made by Tanax.
The first TANA-X AZMirror I installed was too small, and the second was too small.
I replaced them because they became difficult to see due to vibration while driving at high speeds.
It looks just like the Image and was not difficult to install,
After installing the lens, I tried riding it and found that the reflection was at the ideal large size,
It is less sensitive to vibration than AZMirror and easier to see.
Unfortunately, there is no Rubber between the Mirror section and the Body,
AZMirror was better in detail where Mirror's cut surfaces were visible.
Except for that part, Hi-Viz Mirror is better in terms of performance,
I am satisfied because this is a safer way to drive while driving.
View detail
Fits: YAMAHA DRAG STAR 400, YAMAHA XSR700, YAMAHA XSR900, YAMAHA TRACER900, YAMAHA TRACER900 GT, YAMAHA BOLT, YAMAHA MAJESTY250, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-25, YAMAHA MT-03, YAMAHA MT03, YAMAHA XSR700, YAMAHA XSR900, YAMAHA TRACER900, YAMAHA TRACER900 GT, YAMAHA BOLT, YAMAHA MAJESTY250, YAMAHA MT-07, YAMAHA MT-09
Quality good
Side mirror is good quality, matches the look of my bike. However require to order 2 unit. Each order is only 1 side mirror. Hence, i am required to order 1 more side mirror. View detail
We used it for Hazard switch!
The other item of the same brand, the Blinker relay with Hazard switch function, is under the Seat, and from there the Wiring for the switch is extended to the switch part on the Axel side, but the length is not enough, so I needed a Wiring extension.
Once attached, the Switch looks as if it has been around for a long time.
Above all, DL1000 V-STROM250SX Color:I like the fact that it is a YellowMODEL with a Yellow-colored switch!
View detail
Fits: KAWASAKI ELIMINATOR SE, KAWASAKI Z650RS, KAWASAKI ELIMINATOR
Position Improvement
Handlebar felt far away, so it became quite easy.
It was a little strange because I had to replace it by myself, but if someone supports me, I think I can easily put it on!
View detail
Exquisitely shaped Barrel Style Grip
We also use other products from the GRIPPYGRIPSeries and
I try to Check when a new Type is released.
I didn't notice it until I actually held it, but it is actually barrel-shaped.
The thickest part is just under 35mm, and the thinnest parts are just under 33mm, loosely taper to the ends.
Barrel-shaped barrels are not a good match for SportsNAKED, as they give a strong impression of classicism.
This product was not uncomfortable to install because the raised area is very slight.
The accuracy is not good, but if you draw a line on the photo, you can see that it is almost Straight shape.
Active:Elastomer TaperGrip
https://www.webike.net/sd/23817728/
domino:Road Type Grip
https://www.webike.net/sd/21649162/
I have also used a simple Taper shaped Grip of the Sports Type as shown above.
The thinnest part where the thumb rests is thin-walled.
Vibration isolation performance tends to be poor, and it is necessary to keep gripping the Axel to maintain the Axel opening.
Avoid the slender part and hold a little outside, etc. Otherwise, you will be fatigued.
This product has a thick enough wall even at the thinnest part to prevent fatigue.
The Center portion is thick so that the Axel opening can be maintained by lightly pressing the hand against it without a strong grip.
The feeling of the Clutch and Throttle operation changes depending on the position of the force applied.
If you are conscious of adjusting the position of your thumb when starting and cruising
The grid-shaped mold grips firmly, requiring minimal gripping force.
I was concerned that the DAYTONA Logo was so large that it was ruining the GridDesign.
This Logo is only on one side, so it can be rotated 180 degrees and installed in a different orientation.
It retains a more classic appearance, but I would have liked it to be in a more discreet position.
(★-1)
This time I installed it so that the Logo is on the top side, but next time I will turn it to the back side.
Also, it is a fluffy RUBBER in both good and bad ways, so the corners round off quickly.
It is not Level wear that makes it immediately unusable, so it is not necessarily less durable, but
Performance at the beginning of use may not last long.
I'm going to move away from this product impresion, but the same GRIPPYGRIPSeries
Especially for two-color molded Type, the deterioration in usability is noticeable before the appearance.
View detail
Fits: HONDA GROM, HONDA MONKEY125, HONDA SUPER CUBC125, HONDA CT110 HUNTER CUBCT125, HONDA Rebel1100, HONDA Rebel250, HONDA Rebel500, HONDA CL250, HONDA CL500, HONDA GB350, HONDA GB350S, HONDA DAX125
The anti-glare effect is perfect.
Since it is simply attached to Normal mirror, anyone can install it as long as they do not fail in positioning.
The anti-glare effect is effective against the Light of following vehicles during the day when the sun is strong and at night.
The degree of wide angle is not very promising. There is no difference between NORMAL and LARGE in actual view.
View detail
It's looking good!
When adjusting the field of view by moving the Mirror after installing and fixing the Mirror Bracket, it is better to cover the screws on the Mirror side with Tapeetc. to prevent the screws from damaging the Bracket. View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja1000, KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI Z1000, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI 1400GTR, KAWASAKI GPZ900R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja250R, KAWASAKI NINJA400R, KAWASAKI Z1000, KAWASAKI Z1000 R EDITION, KAWASAKI Z250, KAWASAKI Z750, KAWASAKI Z750 S
Used in Ninja 400 KRT color
Purchased to reduce handlebar shake.
I had it put on by Service at the store when I took delivery of the car, but they said that no matter how they did it, there would be a slight gap on the Axel side.
I don't mind, but those who do might not like it.
View detail
I am mostly satisfied!
The installation work took a little bit longer than the same Mirror Non-security Compliant Type, because there were two screws to install, and I was not used to it. 。 On the other side, it didn't take much time because I was able to grab HANG. View detail
Mounting Kan Tan
There are two types of rubber to attach to the handlebar, and the thinner rubber was used to attach the handlebar.
Since the body is black, the bar end is also black.
I thought about adding Accent in other colors, but Black is nice and tight.
View detail
It's more upscale and cooler ?.
Due to damage to Normal mirror, we were looking for a replacement Mirror.
As expected from DAYTONA, the MirrorBody has a luxurious feel, and the bracket part is relatively thick, so it was not difficult to see due to vibration.
The angle and position of the Mirror can also be changed as desired by loosening the Screw, making it easy to use on any motorcycle.
I chose the shorter Bracket, but the longer one would have been fine as it shows the body more easily.
View detail
Fits: HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA XR50 Motard, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 50, HONDA Ape 50, HONDA XR50 Motard, HONDA XR100 Motard
Good Fit feeling of Balance
Quantity:This is my second one, and it can be used on any type of vehicle. One is CB400SF and it is close to the shape of STD Handlebar and it is passable for vehicle inspection. The quality is good and there is no problem with the quality. The second one is used for GROM this time. Personally, I found the height of the STD Handlebar too high, so I considered changing it. I noticed later that other people were also using it. I don't like wide handlebars, and I have a hard time using one that is too high. This is a good handlebar that solves these problems. There are similar products, but for me, this is the best recommendation. View detail
For the price they are good
Easy to install, with an arrow on each end indicating "up". The deep red/ ox blood colour is quite a nice red. They do seem a little thinner than the oem grips & somewhat softer too. I do like The grip pattern, but I suspect the rubber may be prone to wear.. but time will tell. I think my black leather gloves have blackened the grips a little as can be seen in the photos I've uploaded. View detail
Fits: HONDA CB1300SB, HONDA CB1300ST, HONDA CBR250R, HONDA CBR400R, HONDA CBR600RR, HONDA CBR650R, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja1000, KAWASAKI Ninja1000SX, KAWASAKI Ninja250, KAWASAKI Ninja250SL, KAWASAKI Ninja650, SUZUKI GSX-250R, SUZUKI GSX-R1000, SUZUKI GSX-R125, SUZUKI Gixxer SF250, YAMAHA FZ1 FAZER, YAMAHA YZF-R25, YAMAHA YZF-R3, KAWASAKI Ninja400
Smaller Mirror
Product Name
DAYTONA DAYTONA Hi-Viz Mirror Diamond Short
Item Number
16947
Vehicles
GSX-R125 ( 2BJ-DL33B ) 2020
Number of man-hours
10 minutes
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
Because the Mirror was hard to see and it was too Large.
Was the one you received as per Image?
It was as per Image. Shorter than I expected.
Was the installation difficult?
I did not find it particularly difficult.
How was your experience with it?
I don't think it's as easy to see; I should have chosen Long. But if you are more concerned about the appearance, this is the one for you.
[Included Parts:were they on?
Instruction Manual and so on.
[Was there anything that disappointed you?
expensive
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail