Reviews
Functionality good, Cost good
As described in the product description, it has a textured finish, probably due to bad casting sand
But it works fine
The ease of use is the same as other high end manufacturers, etc
Then cheap is a good thing! 。
View detail
Fits: HONDA CBR600F, HONDA VFR400R, HONDA VFR750F, HONDA VFR800, KAWASAKI KDX125/SR, SUZUKI RGV250 (Gamma), HONDA CBR600F, HONDA CBR600F, HONDA VFR400R, HONDA VFR750F, HONDA VFR800
There is no difference between the OEM Product and Large
The first time I tried to use the outside Oil Seal, but the shape and Material are Large It doesn't seem to make a difference
I installed it in KDX125, but it seems that the thickness is a little thicker than the OEM Product and it is firm I had to type it in to get the Snap ring to fit
Dust Seal was not used because the shape of the Dust Seal is different from the OEM Product I don't think it would be a problem if it was an Inverted Front Fork on the road
As for the feel, unfortunately it's snowed in and we'll have to wait and see next spring
View detail
Recommendation
All three motorcycles I've ridden on are BarrelGrips
This product also feels great in the hand
Cost performance was satisfactory
View detail
Fits: YAMAHA XJ400, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJ550, YAMAHA XJ400, YAMAHA XJR400
Cospa best
It's cheap.
It is price less than one-third of OEM.
And yet it's functioning properly.
I attached it to YD 125.
View detail
Fits: YAMAHA XJ400, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJ550, YAMAHA XJ400, YAMAHA XJR400
Good
I attached it to YAMAHA YD 125
Gasoline It was good, as leaks are gone
Cost performance is nice
View detail
Among the grips I have used so far, Ichiban
I feel quite comfortable and I will not get tired even though I am Long touring. I like it quite a lot.. Personally I think that octagonal Grip is better than Hexagon Grip in many ways. View detail
Necessary and sufficient
I tried several times to Cut of 520 Chain. I used it after scraping one side of Pin at Grinder once, but it will be free without difficulty. I do not understand the long-term durability, but it is not frequently changing such as Chain and this is enough for AmateurUser like me.
The item was washed and packed in PetitPetit in dry condition and delivered. It seems that improvement that it reaches with covered oil is improving.
View detail
Fits: KAWASAKI Eliminator 400, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, KAWASAKI ELIMINATOR 250LX, KAWASAKI ELIMINATOR 250SE, KAWASAKI ELIMINATOR 250, KAWASAKI ELIMINATOR 400, KAWASAKI ZZR1100/ZX-11
Oil Filler cap Cherry Alfin Type
It's a good product regarding it's price. Functional, good looking and precise made, which means I haven't had any problems with attaching it to the original oil-fill opening on the crankcase. The chrome-platted look of the cap fits very nice to the polished aluminium side-covers on the engine. I have bought with this product in addition also a flexible tube and mounted it on the oil-filler cap (adapter on the top of the product). This is necessary in order to reach the product's function - the reduction of the inner pressure inside the crankshaft case between the ride. The result of the installation of the oil filler cap is that I get now more torque in lower RPM (under 2.500 RPM), also the engine is revving better. When I drive through the city, where I have to look and observe public's speed restrictions, I smootly run the engine in the 5th gear without any problems. If I want to accelerate, the engine pulls now quite better than before. View detail
Fits: KAWASAKI GPz400F/F2, KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, KAWASAKI Z400GP
Same etc. Goods
It was cheap, so I was a bit uneasy, but it was installed almost as usual with OEM. Moreover, although it is a small amount of money, it is recommended because it is cheaper than OEM. View detail
A good buy!
Hello everyone! The other day I received a parcel, very well packed, in a box with paper and some bubble wrap, the box itself is not crumpled, all the more there will be nothing for the visor. Included: the visor itself, 2 mounts and 4 bolts with washers and nuts. I liked everything very much, especially since I ordered it at a discount when registering. The visor has not been installed yet, we have winter and it snowed, not before)) but I'm sure that everything will work. The only thing is that the parcel was not tracked, but it doesn't matter to anyone, I don't care, the main thing is that everything came safe and sound. Recommend! (translated by Google Translator) Hello! The other day I received the parcel, it is very well packed, in a box of paper and a puppy, the box itself is not rumpled, the windshield, the more nothing will be. Included: self windscreen, 2 mounts and 4 bolts with washers and nuts. I liked everything very much, especially as I ordered at a discount, at registration. The windmill has not yet been installed, it's winter and snow fell, not before that)) but I'm sure that everything will fit. The only thing is that the package was not tracked, but it's someone like, I do not care, most importantly everything came in one piece. I recommend! View detail
If you grasp the available Chain and buy it
If you rotate in Large-sized Wrench, you do not have to cut the head of Chain's Pin in Grinder one by one, you can pull out Pin as it is.
The price is also cheap, so you can work properly enough.
If you are preparing a lot of Motorcycle, some vehicles equipped with Chain that does not fit Cutter will come out, but if you only need your own Motorcycle maintenance, you need the smallest limit.
Let's make it easier to use in Parkari for the time being.
View detail
Red color LED Bulb
I was looking for LED Bulb, trying to convert the Tail lamp of Ninja 250SL into an LED.
Pricing and a large number of LED elements has become the deciding factor for purchase.
Regarding the color, there was White color and Red color, but since License Plate Light of Ninja 250 SL is different, Red color LED Type was selected.
* Tail lens is Red
Regarding the amount of light when Brake was applied, I was worried that it was written that slightly brighter in Review of other people, but it seems to be problematic.
View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPz400F/F2, KAWASAKI GPZ400R, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI D-TRACKER, KAWASAKI ZRX1200, KAWASAKI 250TR, KAWASAKI ZRX1100
It is the best.
There is nothing I got so far among those I bought so far. Because it is cheap, it can be disposable. When I bought it before BALIUS it was a bit small, but for ZEPHYR it is Exactly. View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI ELIMINATOR 250, KAWASAKI ESTRELLA, KAWASAKI GPz400F/F2, KAWASAKI NINJA400R, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, KAWASAKI ZRX400II, KAWASAKI 250TR, KAWASAKI D-TRACKER, KAWASAKI ZRX400, KAWASAKI ZRX1200, KAWASAKI ZRX1100
That's enough.
Until now, this guy has used OEM Parts Number, but if you have this, this is enough. OEM Parts Number is high, I feel wasteful. Let's touch dongdon carburetor from Kore. View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI ELIMINATOR 250, KAWASAKI ESTRELLA, KAWASAKI GPz400F/F2, KAWASAKI NINJA400R, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, KAWASAKI ZRX400II, KAWASAKI 250TR, KAWASAKI D-TRACKER, KAWASAKI ZRX400, KAWASAKI ZRX1200, KAWASAKI ZRX1100
It seems I did not arrive.
Since I did not arrive when I shuffled carburetor of used MOTARD purchase. Since ordering is troublesome at MotorcycleDealer, I bought it here. View detail
It is easy to use with tools of hardiness.
Compared to N part Cutter, it is coarse casting, but Center Pin's worried center pin shake is perfect without wicking.
It also has its own weight and is easy to work. I think that it can be used for a considerable period since it is a casting.
428 Chain was cut easily without having to scrape Pin head with Thunder.
A good tool is not an appearance but a function and a function.
View detail
Cost performance Highly Recommended
Installed in ESTRELLA 2014
Photo 2 Red ○ Although claws which seems to fix the angle are out in the part
I could not install it hitting Light Bracket so Cut in Thunder
By cutting it you can mount it considerably with a slope.
If you want to stand without tilting, cut the hole of the arrow to make it a long hole
I think we can install it.
(There are also models without processing depending on the shape of Light Bracket and the diameter of Light)
Moreover, although it is not limited to this product
Painting of the Other Company Product is often not so good
After Cut at Thunder I paint again with Primer surfacer and Lacquer.
Particularly at the corner parts of the parts there are fine BALI so rust tends to come out from this part
Even if you do not cut it, if possible we will roll off the paper before installation
Rust prevention is better for painting.
(If you do not do anything 1Season the corner floats, it feels like rust)
Mounting the mounting parts according to the shape of each Motorcycle
Bending process will be required somewhat.
Since it dislikes when it gets scratched, such as Light Bracket when attached to Motorcycle
Light We attached to wood pieces cut in width and decided the approximate shape.
Picture 3
Then installed in Motorcycle (All Bolt classes are temporarily stopped)
Fully tighten by adjusting the position and clearance of the draft shield.
If you work carefully it will take time but I think that it is not difficult.
Imagine, but the durability of the windshield itself is inferior to the high product (Deterioration due to ultraviolet rays and Yellow light)
I think that it is not in the usual use problematic range.
This item can be recommended.
View detail
Good!
The texture of Plating is also good, I am satisfied with Large with goods with a high-class feeling in proportion to COSPA.
If there was only one point, it would be anxious that BALI got out a bit in the Lens part.
It will not be a problem if you scrap it out with File.
Waterproof is also steady, I will not rain in the rain
I feel that it is a Level that can be relieved.
It is cheaper than other Manufacturer, but it is quite satisfactory to COSPA as much as I think that other Manufacturer is too expensive (^^)
I also like the name Cherry, so I think that we can offer good items cheaply from now on.
I expect from Cherry..
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z400FX/Z400J, KAWASAKI Z1
Attached to Z1
Because it looks bad, paint other than Shaft Black.
Installation is easy, but because the car height gets a little high, Jack (OK with for Vehicle) It is necessary to cut because it interferes with Chain case.
It seems that the ride taste got supposed to move somewhat supple, but looking more than anything, the look has become Sporty and it's catchy.
Reasonable splitting is satisfied with Large change in effect Large.
View detail
It is Recommendation for people who think that width is wide in YB diaphragm!
There is a limit diaphragm in the Title, but it is not exactly Mischief Handlebar by the degree of squeezing of the Large person just as good as the old car.
Anyway it is cheap so feel free to eat!
If it rusts again COSPA will be replaced without hesitation!
View detail