Reviews
FZ1FAZER08
Replace the Handlebar Post of FZ1FAZER08 with the one for de Raster250
If you install this product, you can get to the Limit where you can't hit the Tank.
Position can be lowered
View detail
Needle clip
Needle clip is indispensable because you can't fix the height of needle without it. it is better to put a clip on each needle instead of removing it when you change the needle. View detail
Needle clip
It is necessary to decide the number of Needle steps of FCR Carburetor Body. It is very helpful because it is hard to buy cheaply elsewhere. View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z400FX/Z400J, KAWASAKI Z1
highly effective
I drive a Z1.
Since I had felt that the rear suspensions were not moving well and were hard, I changed the rear suspensions and made various adjustments, but honestly I could not feel the change that much.
When I had a test ride on my friend's lay-down motorcycle (Z1000Mk.2 with almost the same rear suspension), I couldn't forget how different it felt, so I bought this product, and when I installed it, I could tell the difference clearly just by stepping on it for the first time. I felt it.
It's like a different movement.
When you drive it, it's like a different thing.
Personally, I like the angle that the old car rear suspensions stand at, so I thought the lay-down was... but once you know the effect, you won't be able to put it back on.
The good thing about this product, though, is that it's easy to put it back together.
I want to drive an old car, I want to feel good in an old car, I changed the rear suspension, but it's not so good... I can strongly recommend it to people who think that
If you don't want it to stand out, you should paint it the same color as the frame to make it look more natural. (I painted it black.)
Since Seat CatchLever will interfere with the head of the Rear suspension when it is installed on Z1 because the Rear suspension will be at an angle, in my case, I bent Lever outward to prevent it from hitting the head of the Rear suspension.
Please be aware of that.
The effect of Lay-down is extremely large.
View detail
ใช้งานได้ดี กับ คาร์บูเรเตอร์ cr View detail
For Rust hiding (lol)
I bought it because the Rust on the Flange bolt was becoming more and more noticeable.
Installation is simply a matter of replacing it with a pure STD nut.
Use a Torque wrench to tighten to the specified torque of 25 N/m.
It's no wonder it looks so good.
By the way, I applied Silicon Spray to the Bolt and this product when I removed the pure STD Nut.
View detail
Sufficient performance
I bought this to coincide with the conversion of Blinker Valve to LED.
It installed without any problems.
The operation is stable after installation and I am glad I bought it.
The old fashioned Pushing Pushing Pushing sound was a surprise!
View detail
It's just right for CHALY with short ride height.
My CHALY has a 280mm rear suspension and the ride height is too short.
The previous Side Stand had a tendency to stand upright, but this Side Stand leans better and I like it a lot.
View detail
Fits: KAWASAKI SUPER SHERPA, KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI GPZ1100, KAWASAKI GPZ900R, KAWASAKI ZZR1200
Very easy to install.
It is very hard to ask a motorcycle shop for small, cheap parts like this, so I am very grateful for the ease with which you can buy them on the Motorcycle General Parts Net, such as this one. View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPz400F/F2, KAWASAKI GPZ400R, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI D-TRACKER, KAWASAKI ZRX1200, KAWASAKI 250TR, KAWASAKI ZRX1100
Essential Parts for carburetorOH
I bought it because I needed it to overhaul my 250SB carburetor.
I've never seen the OEM packing in its new state, so I can't compare it to the OEM packing, but this one didn't have any gasoline leaks after it was installed, so it may be considered the same as the OEM packing.
I have been driving it for more than a year after the replacement and I have not had any problems with gasoline leaks or any other troubling issues, so I think I will continue to use CHERRY for OH and maintenance on other cars.
View detail
Fits: KAWASAKI SUPER SHERPA, KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI GPZ1100, KAWASAKI GPZ900R, KAWASAKI ZZR1200
A solid product.
It's very easy to buy these small parts without having to ask a motorcycle shop for them. Good.
The product is fine, same as the OEM Product etc.
View detail
Good!
Good!
It's inexpensive and I love it
I don't know how durable it is yet
I don't think the car is inspected
It's a recommendation for Kawasaki cars
View detail
Eh! Is this a good price?
This is the price of a 23W with Color G18Valve
To be honest, I bought it because it felt fishy
It's just normal!
I can buy 10 or more of them in a 2-pack from another Manufacturer
If you are using Clear or Smoked lenses, you can use
I think that it will come in handy when Valve runs out of Large when you stock a certain number of
It's a Large thing, so I'll write again
Eh! Is this a good price?
View detail
CHERRY Square Police Blinker
I bought the headlights for the Honda MTX-50. Externally, they almost do not differ from the original ones, moreover, they have mobility and do not break from the slightest impact. I bought lights for the Honda MTX-50. Outwardly, they almost do not differ from the original ones, in addition, they have mobility and do not break from the slightest blow. translated by Google Translator View detail
Unexpected!
I'm a person who takes off and puts on and off Chamber quite a bit, so the best thing I can do is to reuse the Gasket that has been stretched out I was using KEIHIN OEM Product because hard work = anxiety, but it still stretched me It's put away Well, I can't help it, because I have to seal it by that stretch
But this product recently It fits snugly into the groove in the early stages, probably because of the excessive stretching For installation, use a small amount of liquid Gas in the groove instead of glue to the bent part of the groove
In my usage, this product matches the OEM Product!
View detail
Enough for occasional use
Not suitable for frequent use
The finish is rough and even looks like it might injure you if you use it with your bare hands
However, if you are an individual Youth and cut a cheap Chain a few times a year at most, it's enough for you There is safer than flying Pin's head off with a Thunder
Cost performance is Number one
View detail
It's nice to get a discount on Spring only
This is the spring of the Rear Brake Switch
Spring has been broken or limping around without knowing it
It helps to be able to purchase only Spring
You can bend it to any length you like and use it to fit any motorcycle
View detail
Great quality!
I didn't expect to receive this Quality product for $2,000
Some modification is required, but it can be made to fit your motorcycle as you adjust it
Comfort equipment tends to basically make you look bad, but this product will increase your comfort and look good It's a wonderful thing that makes it better
I can't believe this is $2,000 Very good purchase
Thank you very much
View detail
It is cheap and good
I used it as a blowby hose
The Hose was soft and easy to handle
I bought it for the price as it is not a prominent place, but it was sufficient for my needs
However, it's industrial-mechanical design makes it unsuitable for a prominent location
View detail
Cost performance is perfect
Purchased for rounding
with Bulb, but Color:Yellow and not so bright
Well, you're buying a Headlight, so it doesn't have to be with Bulb
It is light and the texture of Plating is passable
Considering the Gold amount, there is nothing to say
View detail