Reviews
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, Others CRcarburetor, Others FCR Carburetor Bodycarburetor
Good and close to OEM. I would purchase again.
Good and close to OEM. Would buy again. View detail
Used to return air from Tokyo TowerImpulse's Fuel Tank and carburetor
I was looking for a replacement for the OEM Hose since it was discontinued.
I was looking for an Oil Resistant Hose with an inner diameter of 5mm and a thicker outer diameter, and this Universal Product came to my attention.
Needless to say, the reason for making the external shape thicker is so that the hose band can be tightened more effectively.
I used the OEM 8mm outer diameter and attached it.
I would like to use it for other Motorcycle Repair as it is very cost effective and I have some left over.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, Others CRcarburetor, Others FCR Carburetor Bodycarburetor
Not bad to look at.
It is inexpensive, but not badly made. Durability does not seem to be a problem. View detail
Fits: HONDA CB400FOUR (water-cooled), YAMAHA XJR400R, HONDA CB400SF, KAWASAKI ELIMINATOR 250, KAWASAKI GPz400F/F2, KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZR-7/S, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI GSX250S KATANA, SUZUKI GSX400S KATANA, SUZUKI GSX400, SUZUKI GSX400, YAMAHA XJR400R, YAMAHA XJR400, HONDA CBX400F, HONDA CBR400F, HONDA CBR250R
No exhaust leakage.
Used for Exhaust System replacement. The work was completed without any exhaust leaks. View detail
Fits: HONDA CB400FOUR (water-cooled), YAMAHA XJR400R, HONDA CB400SF, KAWASAKI ELIMINATOR 250, KAWASAKI GPz400F/F2, KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZR-7/S, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI GSX250S KATANA, SUZUKI GSX400S KATANA, SUZUKI GSX400, SUZUKI GSX400, YAMAHA XJR400R, YAMAHA XJR400, HONDA CBX400F, HONDA CBR400F, HONDA CBR250R
Gasket
There is no exhaust leak and it works normally. View detail
Enough for occasional use
Not suitable for frequent use
The finish is rough and even looks like it might injure you if you use it with your bare hands
However, if you are an individual Youth and cut a cheap Chain a few times a year at most, it's enough for you There is safer than flying Pin's head off with a Thunder
Cost performance is Number one
View detail
It is cheap and good
I used it as a blowby hose
The Hose was soft and easy to handle
I bought it for the price as it is not a prominent place, but it was sufficient for my needs
However, it's industrial-mechanical design makes it unsuitable for a prominent location
View detail
Functionality good, Cost good
As described in the product description, it has a textured finish, probably due to bad casting sand
But it works fine
The ease of use is the same as other high end manufacturers, etc
Then cheap is a good thing! 。
View detail
Necessary and sufficient
I tried several times to Cut of 520 Chain. I used it after scraping one side of Pin at Grinder once, but it will be free without difficulty. I do not understand the long-term durability, but it is not frequently changing such as Chain and this is enough for AmateurUser like me.
The item was washed and packed in PetitPetit in dry condition and delivered. It seems that improvement that it reaches with covered oil is improving.
View detail
If you grasp the available Chain and buy it
If you rotate in Large-sized Wrench, you do not have to cut the head of Chain's Pin in Grinder one by one, you can pull out Pin as it is.
The price is also cheap, so you can work properly enough.
If you are preparing a lot of Motorcycle, some vehicles equipped with Chain that does not fit Cutter will come out, but if you only need your own Motorcycle maintenance, you need the smallest limit.
Let's make it easier to use in Parkari for the time being.
View detail
It is easy to use with tools of hardiness.
Compared to N part Cutter, it is coarse casting, but Center Pin's worried center pin shake is perfect without wicking.
It also has its own weight and is easy to work. I think that it can be used for a considerable period since it is a casting.
428 Chain was cut easily without having to scrape Pin head with Thunder.
A good tool is not an appearance but a function and a function.
View detail
I am satisfied.
Although it is the second purchase this time, it is when it is bogoboko to the product explanation, but there is no hindrance to handling at all, it is not a thing to show to a person, but it is rather beautiful paint or something like crane so that Cost will go up It is very good, I thought that the first one would be broken, but I am taking a rest in the tool box without saying that it will be broken, I will be taking a rest in the tool box, less than 1000 yen, this quality, another tool Manufacturer I would like to receive it! View detail
Fits: HONDA CB400FOUR (water-cooled), YAMAHA XJR400R, HONDA CB400SF, KAWASAKI ELIMINATOR 250, KAWASAKI GPz400F/F2, KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZR-7/S, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI GSX250S KATANA, SUZUKI GSX400S KATANA, SUZUKI GSX400, SUZUKI GSX400, YAMAHA XJR400R, YAMAHA XJR400, HONDA CBX400F, HONDA CBR400F, HONDA CBR250R
It is the second purchase.
【What made you decide the purchase?】 Required item
Of course, the price.
【How was it actually used?】 Required item
I bought it before, but since it was no problem purchase for the second time
【Was it difficult to install? (Hard parts case)】 Any item
Since it is Ring-shaped, if it is not fixed with liquid Gasket, it can not fall and can not be installed.
Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】 Any item [Is there anything I was disappointed about?] Required item
Nothing else.
【Hope for Manufacturer - Please let me know if there are any improvement points] Required item
I want the shape to have a more flat surface. Then I feel like I will not lose to other Manufacturers.
[Others] Any item
View detail
Fits: HONDA CB400FOUR (water-cooled), YAMAHA XJR400R, HONDA CB400SF, KAWASAKI ELIMINATOR 250, KAWASAKI GPz400F/F2, KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZR-7/S, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI GSX250S KATANA, SUZUKI GSX400S KATANA, SUZUKI GSX400, SUZUKI GSX400, YAMAHA XJR400R, YAMAHA XJR400, HONDA CBX400F, HONDA CBR400F, HONDA CBR250R
good!
It installed in ZEPHYR 750.
Large Changing compared to hand Manufacturer.
As consumable parts, this price is appreciated!
I have to exhaust the exhaust so I need it enough!
Until now, I exchanged it in 2 times, but if this price is exchanged every time I wonder?
View detail
Fits: HONDA CB400FOUR (water-cooled), YAMAHA XJR400R, HONDA CB400SF, KAWASAKI ELIMINATOR 250, KAWASAKI GPz400F/F2, KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZR-7/S, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI GSX250S KATANA, SUZUKI GSX400S KATANA, SUZUKI GSX400, SUZUKI GSX400, YAMAHA XJR400R, YAMAHA XJR400, HONDA CBX400F, HONDA CBR400F, HONDA CBR250R
Although a Muffler is changed yesterday, it used as it is.There is also no exhaust leakage and it will use about twice now.Since it is a ring-like, I think that more than this is impossible, but I think that it will be the No.1 COSPAR if it considers
Although a Muffler is changed yesterday, it used as it is.There is also no
exhaust leakage and it will use about twice now.Since it is a ring-like, I think that more than this is impossible, but I think that it will be the No.1 COSPAR if it considers that it can use twice for 100 yen.However, using twice needs your help by self-responsibility.
View detail
It can use comparatively [ cheap ] firmly.It is strong although finishing is coarse.This is enough if it seldom uses.A function is achieved firmly.
It can use comparatively [ cheap ] firmly.It is strong although
finishing is coarse.This is enough if it seldom uses.A function is achieved firmly.
View detail
They are the first goods when considering a Cost performance. Although not used easily, if a thing is considered throughout life, even if it has, there is no loss. It is easier than the Grinder cuts, and there is nothing very nearly. All toget
They are the first goods when considering a Cost performance.
Although not used easily, if a thing is considered throughout life, even if it has, there is no loss.
It is easier than the
Grinder cuts, and there is nothing very nearly.
All together, it uses about and can do.
View detail
A three-point Set was exchanged for Front 15T, rear 33T, and a Chain. The NORMAL was 14T.34T. special tool has been exchanged only by the Chain cutter. Although there was no instruction manual, it has cut easily. It could purchase che
A three-point Set was exchanged for Front 15T, rear 33T, and a Chain.
The
NORMAL was 14T.34T.
special tool has been exchanged only by the Chain cutter.
Although there was no
instruction manual, it has cut easily.
It could purchase cheaply and satisfied, since it will not use from now on.
View detail
Fits: HONDA CB400FOUR (water-cooled), YAMAHA XJR400R, HONDA CB400SF, KAWASAKI ELIMINATOR 250, KAWASAKI GPz400F/F2, KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZR-7/S, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI GSX250S KATANA, SUZUKI GSX400S KATANA, SUZUKI GSX400, SUZUKI GSX400, YAMAHA XJR400R, YAMAHA XJR400, HONDA CBX400F, HONDA CBR400F, HONDA CBR250R
Although the goods of a certain auction were used before, after sticking and fixing to attachment with the liquid Gasket smaller than a port attachment, when it did not come out, the Gap had happened. Although the goods here were found and purchased
Although the goods of a certain auction were used before, after sticking and fixing to attachment with the liquid Gasket smaller than a port attachment, when it did not come out, the Gap had happened.
Although the goods here were found and purchased, it has attached with the Beauty by loan attachment with the liquid Gasket so that a size might also be large and it might not fall at the time of attachment.
Of course, there is also no exhaust leakage.
He is indebted to the goods here from now on.
View detail