Reviews
Fits: HONDA MONKEY, HONDA GORILLA
I'm ready to step up to the plate.
When I changed Rear to Other Brand Product, I was worried about the weakness of Front, so I introduced this one.
Compared to OEM, I think it has a little more tread to it.
View detail
Fits: HONDA MONKEY, HONDA GORILLA
Large satisfaction with excellent stability
Normal look is what I'm obsessed with, but for the 88cc engine, it's Normal The fork is still unstable
I found this product when I was looking for reinforced parts for driving stability
How did you feel after the exchange? "Outstanding stability It was
I'm really happy with the enhancements without ruining the look I chose the OEM Length, but I also have a choice of lengths, so I stuck with the Normal look I really recommend it to anyone who is
Spring replaced it himself, but I'll review the work
You can find out how to exchange it on the Net
MONKEY OEMFront Fork Spring Replacement
You can check a lot of things by searching for
We recommend replacing the following parts at the same time, as they are almost all Rose The part number is the OEM product number
Quantity:2pc. Each set is required
?ForkGuide (Part #:51502-045-670)
Dust Seal (Part #:51503-165-003)
PistonSlide pipe (Part #:51507-098-000)
?PinSpring (51526-098-000)
? , ? is Quantity:This is the one in the 1pc. eye photo
I bought these two at the same time as Spring
However, in the process of roasting, the plastic bottle broke off (see the third picture) and I had to order more in a hurry I had to order more in a hurry (the third picture)
? looked like it could be reused, but I didn't want to make another mistake, so I decided to replace it with them
Even on the Net? It is a good thing that I was able to get a good idea of what was going on, because I thought that I was going to be able to get a good idea of what was going on
I ended up having to wait a few days for the second picture
One of them didn't break, but it was pretty degraded, so I'd recommend buying it from the beginning It is
Spring is Quantity:1 Set of 4pcs. it installs to wrap around the parts in the eye picture, but
Check the inside and outside of the fork to make sure it is facing the right way
Install the spring while adjusting the orientation
A similar part will be attached underneath the Spring, but you'll have to check the direction of the pin holes to make sure it's facing the same way Install
Quantity:1 Set of 4pcs
Once the Spring is assembled, grease it well and restore it
There are many different types of grease, but I used a generous amount of Urea grease to restore it! It was
I hope you will join us
It takes quite a bit of time to do the work carefully, but I am satisfied with the changes after the replacement
View detail
Fits: HONDA GORILLA, HONDA MONKEY
Battle at price
The installation has been done a few times with Gorimont FFork Parts Replacement Grease Replacement, so It's easy to remove from the Fork and divide it into two parts, but this is the first time I've removed the Fork Spring So when I watched Net and grabbed the game, I was grilling between the Vise and the Vise, and it didn't just miss, it went on and on I couldn't help myself, so I used a sander to cut it off I put it on the Vise stand and realized it was Opposite Thread Screw, so the second one was I managed to remove it with a lot of force
Installation is done in reverse order and then you can put the Grease to Quantity:Pair (for Left and Right) You can paint it in evenly (I make sure to apply the Grease so that no air gets into the Spring place every time I'll put it in.)
I grabbed the FBrake to see how much spring pressure I could get before the ride, and then I moved it up and down I felt it was quite hard, but there is no feeling of rattling at all when I started riding There is no NORMAL Full Bottom and no pompom when Brake is on (By the way, I installed an absorber on One Side.) I was able to drive my MONKEY at 60km with the Pi Pass as it is a second class Number The braking is now better than the NORMAL Plus Absorber
One last word, Moldy's packaging was very clean and Bigli
View detail
Fits: HONDA GORILLA, HONDA MONKEY
There is no Instruction Manual
15? Down purchase 24? Spanner and vice need attention Please note the orientation of Upper Spring holder 5 LMONKEY requires Slide pipePiston so thin 24? Spanner is also necessary Normal Spring can not be removed, so I disconnected with Thunder. Next, remove the Spring cut by cutting the Upper Spring holder between all vise, and now turn down the Lower Spring holder 24 in thin shape with the Spring below, and remove it by thinning. It is easier to install from the Upper Spring holder, or it may be easier to start with Grease Rotate Spring by hand and tighten to the same position as NORMAL Next time, attach the bottom Lower Spring holder to the finished car body and finish it when compared with NORMAL I do not feel Stress with a sense of off-road Also, it's more comfortable to ride than Zoom's Down suspension attached to your favorite car, AXIS T light tiger. View detail
Fits: HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub]., HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub].
Those who dislike CUB fluffy Front peculiarly investigate!
Exchange with Shop and exchange. The reason is that Spring compressor can not be prepared.
Since the suspension unit of the first-class Manufacturer's Shock will be in the range of 9800 to 15000 yen, the spring fee + wage is overwhelmingly cheaper. (I fell within 8000 yen)
If you can do it by yourself, you can see the effect at 4320 yen.
If you show OEM's Shock during disassembly, it will be punyu ~ ~ ~ urgently moving so it may be missing (De Fault Behavior? While having anxiety, I had it built into cubySpring.
【Imprint after installation】
- Handling is demon heavily because it is solidified in Solidly, the impression that we declined from power steering to heavy steam in Car. It was good that it was feeling that I was steering a full-scale Motorcycle as the Handlebar could not easily swing easily.
- When stopped, when Front Brake was canceled Front rise became Zero!
- 60km / It occurred with a straight line over h "Front does not grip" The feeling of fear ceases.
【Future tasks】
Since OEMShock is Sauce, changing feeling of Shock will further improve Fe Ring.
★ Replacing and correct answer. Rear suspension (Shock) I should have done at the same time.
People who are still using OEM Shock & Susason want to try it soon.
View detail
Fits: HONDA GORILLA, HONDA MONKEY
The ride has changed definitely!
Since Grease was leaked from MONKEY's Front fork acquired in second hand, I exchanged Spring after Boots exchange.
In OEMSpring, the movement was bad and I did not use it as a Suspension, but after changing to this, I will steeply stepping forward. It was harder than I thought, but it got easier to ride.
Exchange was quite Large strange. Especially if you do not have a fixed thing such as Vise for installation, I think it is quite Large strange. Because I did not have Vise, I could not insert it all the way back.
View detail
Fits: HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub]., HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub].
First time purchased from this website. I was really impressed the way you handled my order,prompt reply instant update on items and very fast delivery. Will definitely be using them again.
First time purchased from this website. I was really impressed the way you handled my order,prompt reply instant update on items and very fast delivery. Will definitely be using them again. View detail