Reviews
No discomfort when walking around town.
It is comfortable to walk around town.
It is quite a beautiful design. Not too many people wear it.
Although it is solidly built, walking, shifting, and rear brake operation can be performed comfortably.
I usually wear SneakersSize 26.5CM, 42 was the right size for this shoe.
View detail
Protection as good as Short Boots
Was the one you received as per Image?
I liked the very Sporty appearance, which is typical of ALPINESTARS.
[How did you feel about the Fit?
It is an interior that even I, a Japanese person, often Fit.
How was your experience with it?
Even a super sports bike has the protection that makes it seem sufficient for a little touring.
View detail
Pre-installation impression
The Instruction Manual was not included in the package, but can be found on the product page of the official ENDURANCE website. It is recommended to check the contents before purchasing.
The product is made of steel sheet gold, so it does not have a luxurious feel, but the machining precision and the texture of the paint are good, and it does not look so cheap.
The ENDURANCE Logo is a Sticker, so you don't have to put it on if you don't need it.
Low head cap bolt for Case mounting (M6, hexagon socket) and HexalobularBolt for fixing the lid (M5) was included in the package.
Hexalobular (Torque) was supplied with a Wrench, but a 3mm Hexagonal Wrench and 10mm Spanners are required to tighten the Cap bolt.
To store the ETC in the Case, simply affix a protective sponge tape to the Case and place it inside.
Since this is a universal product, it is necessary to arrange an appropriate bracket separately for installation on the car body.
The dimensions of the holes available for installation were described in the Instruction Manual for handling.
The case does not have waterproof or dustproof features, but I think this is sufficient because it prevents direct exposure to rain in addition to the waterproof feature on the ETCBody side.
In general, it is sufficient for my needs, but I feel that the price is a bit expensive since there are many other with-key products available for a little more money.
View detail
dirt prevention
The fabric is Polyester.
It is not lined, so it is not expected to be waterproof like Tarpaulins fabric.
The cover area covers the front and four sides of the bag. Due to its structure, the back of the bag can be covered only slightly.
It is a special product, so the fit to the bag is good. There is no worry that it will come off while driving.
Older types could be identified top and bottom by looking at the Logo, but the current product has no Logo printed on it, so it is necessary to check the position of the drainage hole.
The quality and texture is neither good nor bad.
View detail
A little heavy?
It is no longer a standard product. lol
The drawback is that the Material is heavy because it is steel.
Backrest and Engine Guard and Quantity sold by the company for ELIMINATOR 400:A whopping 10kg increase when installed with 1 Set of 3-items!
It's not only the push/pull, but it also affects the ride a bit! That's what I'm thinking. (Polish)
However, it is a must-have item to attach the side bag, so it is attached.
The product itself is well made and has a nice paint job.
It does not seem to be Rust if you don't scratch it.
If the material was Stainless Steel or something like that, I would give it 5 stars. (Polish)
View detail
JetSetting
Since it is a KEIHIN OEM, it is safe to use.
I lost it and purchased it, even though I adjust it based on temperature and humidity.
View detail
Batch!
Was the ELIMINATOR 400 Bracket prepared for the purpose of attaching this? It fits so perfectly that you may wonder if you prepared the Bracket to put it on.
BoltQuantity is also installed by removing the Side Panel.:Easy installation by simply fastening with 2pcs.
It is also nice to use, so I think it is a good product to install. (,,> <,,)
However, if the Key is Quantity:It's going to be 2 pc...
(OEM keys and keys specific to this product)
Well, that's the same with other cars, so it can't be helped lol.
View detail
Gloves with high hand freedom and high protection
Was the one you received as per Image?
It looks cool anyway.
[How did you feel about the Fit?
The material itself is thin and has an excellent fit.
How was your experience with it?
It fits very comfortably in the hand and is easy to operate.
[Notes]
The first time I put it on, it hurt a little around my fist, so I recommend actually trying it on.
View detail
Style
I think Material and Style are good.
The crotch is shallow as you mentioned in your Impression, which is just right for me. (MW30-36Inch) The response is too broad and I would like it to be more separated.
View detail
Fits: KAWASAKI Ninja ZX-4R SE, SUZUKI V STROM 250SX
Convenient locking by pushing in
The simple shape, light weight, and compact design are also good.
I use it with another Manufacturer's Chain at home and as a Disc Lock with Single Body when I am on the road.
Rubber lids are sold as Repair Parts and may be purchased in advance.
View detail
Fits: YAMAHA XSR700, YAMAHA XSR700, YAMAHA XSR700
Good product.
This single pole locks the Porch columns and two Motorcycles together.
One end has a Ring and another Ring is attached, so the length of the Chain can be used effectively.
The Chain itself is of standard construction, but I would recommend it because of its length for the price, which, together with the aforementioned points, makes it easy to handle and to use the so-called "earth lock".
I have no complaints about the Pad lock that comes with it in terms of functionality, but the Body is Material:Plastic and cheap looking and may be somewhat less secure. (I use another lock that I have on hand.)
View detail
Lightweight and strong wire lock
[How is it used?
It is used in conjunction with the Ring of the genus Gold, which is buried in the ground in the parking lot of Apart.
How was your experience with it?
1.It is lightweight for its length of 5 m, so it is easy to clean up.
View detail
A little relief on rainy days
I had only used the Net type, but after using it, I was impressed with the convenience of the Large type.
Loaded cargo is inconspicuous
No gaps to protrude
Large sturdy enough for a little bit of rain.
More compact than Net type when stored
I bought a Large size thinking that a Large would also be a Small!
Can wrap a full size helmet completely.
View detail
Universal and easy to use
Material:Stainless Steel 8mmCap bolts are available at Home center in various lengths (about 150 yen per pc).
Even if it is not a car-specific product, this one from Universal was sufficient for me.
Also, there is no extra Logo, etc., which is nice and clean.
View detail
Fits: KAWASAKI ELIMINATOR 250V, KAWASAKI ELIMINATOR 250V, KAWASAKI ELIMINATOR 250V, KAWASAKI ELIMINATOR 250V, KAWASAKI ELIMINATOR 250V, KAWASAKI ELIMINATOR 250V, KAWASAKI ELIMINATOR 250V, KAWASAKI ELIMINATOR 250V, HONDA PC800PC800 PACIFIC COAST, HONDA MAGNA750, HONDA VRX400 R100 ROADSTER, HONDA VRX400 R100 ROADSTER, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA)
V-TWIN MAGNA front tire
I replaced my V-TWIN MAGNA front tires with these tires because they were deteriorating and cracking badly. The price was the cheapest I could find and the delivery time was fast. View detail
Excellent visibility
This one is used for CRF250RLY50 MOTARDSpec.MD44 and my car Swift Sports31s
It is inexpensive, highly visible, and the cap is easy to remove, so it is great for Small students who check their air pressure frequently.
My only regret is that when I purchased this item from Webig, it was somehow shipped as a Single Item, even though I requested that it be combined with an order that was waiting for another item to arrive.
I was very irritated that I had to pay a ridiculous shipping fee for an item that cost less than 100 yen.
View detail
For the first time Pulley
Quantity from NORMAL's mellow:Just by replacing a set of sets, you can run comfortably.
The Lightweight Pulley Boss can also be replaced for even better response.
View detail
Fits: HONDA TODAY, HONDA DIO CHESTA, HONDA DIO CHESTA, HONDA DIO, HONDA DIO, HONDA Giorno
OEM is #1 ??
Anyway, OEM is the best.
It is safe.
View detail
It's great that it's not difficult.
I thought Chain exchange could only be done at the Shop.
I nervously worked through the Instruction Manual and YouTube, and it was surprisingly easy.
Next, I have prepared a Chain replacement for GSX1300R HAYABUSA and will lend it to my friend.
If you use it for a few cars, it will be enough to pay for itself.
I'm glad I bought it... ♪
View detail
CBR1000RR-R uses this
The Rear Axle Nut of the CBR1000RR-R is 36mm in diameter.
The tightening torque is also high, and a box with many angles was used, but it seemed to come off, so we changed to a 36mm hexagonal box.
At the same time, I also purchased a pure STD Nut with it. I think I was able to buy peace of mind at a reasonable price with FirmlyFit. I think I was able to take countermeasures before I got injured, although I am satisfied with myself.
View detail