Reviews
Fits: HONDA GROM, HONDA GROM, HONDA GROM, HONDA CB125R, HONDA CB250R, HONDA CRF250L, HONDA CRF250L, HONDA CRF250M, SUZUKI GSX-R125, SUZUKI GSX-S125
It is good that it is OEM chic Blue. But ….
This is a very dangerous product, even if you step on the rear brake. I was like, "Hey, what's that? Was this IceSkatingLINK?" It doesn't work as well as it should!
It is totally impossible to adjust the speed with the Rear brake at the Left turn and try to go around Small lol.
The quality and texture of the product is OEM-like, which I like.
Unfortunately, I have reverted back to Red Pad.
View detail
Fits: YAMAHA Tricity155, YAMAHA NMAX155, HONDA CB500F, HONDA CB500X, HONDA CBR500R, YAMAHA VINO, YAMAHA MAJESTYS XC155, YAMAHA DELUXE, YAMAHA TRICITY125, YAMAHA TRICITY125ABS, YAMAHA JOG, YAMAHA TRICITY 155 ABS, YAMAHA NMAX 155, YAMAHA NMAX, YAMAHA FJR1300 A, YAMAHA FZ16, YAMAHA FJR1300 AS, SUZUKI V-STROM650, SUZUKI V-STROM650 XT, SUZUKI SV650X
I bought it as a Stock, but I replaced it as soon as possible and it works great!
I purchased it for Stock on April 6 and it was promptly replaced.
Even after replacing the battery, the cell was weak and rarely restarted from idle ring stop, so I checked the Fuse and found that the Fuse had not run out, so I checked the Plug and found that it was covered.
After the replacement, the cell runs well, and the car no longer has trouble restarting from idle ring stop.
It has about 13,000 km since I last replaced it with the same one, and I was hoping it would last a little longer, but the price is low, so it's a good thing.
View detail
Fits: BETA REV-3, BETA REV'125, BETA REV'200, BETA REV'250, MAGNI 1000 Arturo, MAGNI 1000 Suffeeder, MAGNI 400 Suffeeder, MOTOGUZZI 1000s, MOTOGUZZI V40 Targa, YAMAHA GX250, YAMAHA XV535DX Virago, BETA zero, BETA techno-pop, BMW R100CS, BMW R100RS, BMW R100RT, BMW R100S, BMW R100T, BMW R65, BMW R65LS
NGK offers a great sense of security!
As expected of NGK, it's a very Large, very secure.
I think the starting performance has improved.
View detail
Fits: DERBI Antochia Coppa Diablo, DERBI Olympia Savanah Start, DERBI Grand Prix 74, DERBI Sport variant jumbo, PEUGEOT fox, PIAGGIO Chao-P., TOMOS alpino, TOMOS Classic I, TOMOS Classic II, TOMOS Flexer Sport, TOMOS levirate, Vespa 100 Vintage, Vespa 125ET3, Vespa 125ET3 Vintage, Vespa 50s Vintage, Vespa PK125S, Vespa PK50SS, Vespa Vespa Car APE50VAN, YAMAHA MR80, DERBI FDS, GTS, RD-2
Low price! It's helpful for old car riders!
I recently acquired a 50 year old Van Van 75 and have spent a lot of time and money to make it look like a new car. Thankfully, the engine was in great shape, so I just put in air cleaner, cleaned the exhaust system, changed the mission oil, and didn't have to touch the engine or carburetor. I was surprised to see that the plug was tightened so much. When I finally took it off, I found a plug that looked like it was 10 years old.
I replaced it with this plug, and the engine sound seems to be much lighter. I also made a Vehicle Mounting Tool Set and installed it with the spare plug since I didn't have any tools to mount it on the car. All that was left was to put the spare Gasoline in the bag and install it.
It will soon be fully restored.
View detail
Fits: KAWASAKI Z650, KAWASAKI Z250, KAWASAKI VERSYS, KAWASAKI VERSYS, KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI Ninja ZX-6R (ZX636), KAWASAKI Ninja 650, KAWASAKI KLX230, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250, SUZUKI SV650X, SUZUKI SV650, SUZUKI SV650, SUZUKI GSX250R, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZ250X, YAMAHA MT-03, YAMAHA MT-25
not enough length
I checked the compatibility chart and bought it.
It was insufficient length.
It's an old car, so it can't be helped?
I should have checked the number of Piece of the actual car.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRM250AR, HONDA CRM250R, HONDA CRM250R, HONDA SL230, HONDA SL230, HONDA XR230, HONDA XR250, HONDA XR250, HONDA XR250, HONDA XR250, HONDA XR250 BAJA, HONDA XR250 BAJA, HONDA XR250MOTARD, HONDA XR400R, HONDA XR600, HONDA XR650, HONDA XR650
Used for CRF250L. A little more emphasis on acceleration.
By changing the rear to 42T, the speed range below 50km/h has become easier to use. Of course, the RPMs become a bit louder at speeds above 60 km/h.
Speed healers are used, so speed errors have already been corrected.
View detail
Used for CRF250L
We used it to fasten X.A.M's Driven Sprocket.
The OEM is M10Bolt, so an M8 conversion Spacer is required to use this one.
The OEM tightening torque is 50 N.m, but when I tried to tighten it with the same torque, it seemed to lick, so I tightened it with a little less torque.
I wonder if you could write the stipulation Torque in the Package.
View detail
It got brighter.
Replaced Headlight Bulb on Z125PRO.
The purpose was not only to make the engine brighter, but also to reduce the load on the battery (power saving). The Z125PRO had LED lights from the beginning, so there was no need to replace the tail lamps. I thought about replacing the blinker light because it has a normal bulb in it, but I decided not to do it because the blinker relay seems to be built into the meter and it would be complicated to change it to LED. This time, I decided to replace the Headlight Bulb and the Position Lamp with LEDs, and for the Headlight, I chose this product, which was the cheapest among the Sphere Light products.
The replacement work was as simple as removing the headlight cowl and replacing the valve with the original one, and since the valve is compact, there were no problems with installation.
As for the feeling of use, the light is bright enough and feels very bright, probably because the light is whiter. I was able to drive safely at night. I was not bothered by the dispersion of the light. Unfortunately, there was not enough of an energy saving effect that I could really feel.
Compared to when we replaced the LEDValve on our ZRX1100 a few years ago, low-cost products are now on the market, and the hurdle for replacement has gone down. If you are concerned about the brightness of your lights, we recommend replacing them with LEDs.
View detail
Tightly sealed. Very easy to use and durable, if you are not sure which Oil Jug to choose, this is the one.
There are many Oil Jugs out there, but I bought this one because it has a lid and is just the right size.
There are three points to this product. The product does not need to be wiped clean every time, the liquid can be left in a sealed bottle, and spare parts are available.
The work is faster and less garbage is generated because there is no need to wipe up every time when the work is finished.
In particular, the ability to leave the liquid in place is quite an Advantage, and can be used, for example, in the following ways
1. Prevents Garbage contamination during work.
2. Oil replacement work can be done across the day.
3. Easy to reuse waste oil
4. Easy transfer of fluids
All items are related to personal DIY.
The first is obvious, but the second is more convenient and easier to set up for DIY. Even if it is already dark when the last injection is to be done, it can be carried over to the next day or even a few days later. This is especially useful for cases that take a long time to inject, such as Mission oil for cars.
3 is also important for me personally. For example, it is useful when maintenance around Overhaul or Clutch requires removing oil once, but you want to reuse it instead of using new oil.
The oil is a typical example of a motorcycle rider's sense of value that is easily bugged, but if you think about it calmly, it is very expensive, and I don't feel the need to replace it with new oil every time, especially when the clutch cover is opened.
4 was a useful Point that I realized after I bought it.
For example, for waste oil disposal, we used to make a waste oil pack, but now we receive the waste oil in an oil pan, return it to a jug, and then put it in a plastic bottle and take it to disposal. This kind of troublesome liquid transfer can be done cleanly.
Items is useful, but there are drawbacks.
First of all, the base of the nozzle sticks out in the bottle and leaves oil. This is not good.
Also, the Mesh at the base of the Nozzle is subtle. It reduces the injection speed.
The protrusion is not a functional part, so opening a horizontal hole may solve the problem.
A weak point in durability "Nozzle" I have been using it for about 4 years and it hasn't cracked.
This is a good product that I can highly recommend in JUG. Seriously recommended.
View detail
air access
The package was received in excellent condition and in addition to all the contents being well protected, the item did not suffer any type of damage, and was also delivered on the exact date indicated at the time of making the purchase. View detail
It did not require much force to turn.
Used for YAMAHA's MT-07 (vehicle weight:184kg)
Adjust length to Swing Arm then Quantity:Set
I wondered if I would need to use a lot of force to turn the Tire when it finally lifts up. I actually tried it, thinking that it might take a lot of strength to lift the tire at the end, but it went up surprisingly easily. I think that even a woman with a small grip can turn it without a driver.
After lifting, even if lock nut is not used, it will not fall down, but it may be better to use lock nut to protect the threads.
Chain cleaning and wheel cleaning became very easy.
It is a cosmetic Tool.
It would be better to apply raspene or similar to the Screw pile when finished using it.
View detail
It looks like it will fit in the stated capacity.
2.The product is up to 5L, but it seemed like a Limit at about 2.3L.
It's in there with no problem, so it's supposed to be in there as described.
It's much easier to dispose of than the previous Dan Ball box was.
View detail
For DIYCustom.
This is an unusual Size and will be useful for DIYCustomers. View detail
Fits: HONDA CRF250M, HONDA PCXe:HEV, HONDA PCX, HONDA PCX160, HONDA PCX150ABS, HONDA PCX HYBRID, HONDA CRF250L, HONDA CRF250 RALLY, HONDA CRF250 RALLY LD, HONDA ADV150, HONDA ADV150, HONDA ADV160, HONDA CRF250 RALLY, HONDA CRF250 RALLY LD, HONDA CRF250L, HONDA CRF250M, HONDA PCX eHEV, HONDA PCX HYBRID, HONDA PCX, HONDA PCX150
Stiff
It is somewhat stiff, and I am concerned about the feeling of the Pad being scraped during Brake.
The Red Pad went away very quickly, so I will use it with high hopes for durability.
View detail
Fits: bimota Furano1000, bimota Dieci1000, bimota YB-6, bimota YB11, bimota YB-8, bimota YB-4, YAMAHA FZR750R, SUZUKI GSX550L, SUZUKI GSX750F, SUZUKI GSX400 FW, SUZUKI GSX400 R, SUZUKI GSX400 FS, SUZUKI GSX1100F, SUZUKI GSX1100E, SUZUKI GSX-R750J, SUZUKI GSX-R750R, SUZUKI GSX-R750, SUZUKI GSX-R750, KAWASAKI ER-5, SUZUKI GSX-R1100
Stable Explosive Power
Large cutting Plug that sends strong sparks flying.
Since we have installed Uotani SP2, PlugGap is spread out as specified.
This purchase is as a spare part.
View detail
Fits: KAWASAKI 1400GTR, KAWASAKI ER-6f, KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI Ninja 650, KAWASAKI Ninja ZX-14R, KAWASAKI VERSYS, KAWASAKI Z650, KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI ZZ-R1400, KAWASAKI Vulcan S, SUZUKI GSR750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-S750, TRIUMPH Street Triple R, TRIUMPH Street Triple R-LRH, TRIUMPH Street Triple RS
Z900RS used purchased, 4.800 kg, plug replaced
Purchased to replace a plug.
Kawasaki Z900RS cafe
second-hand acquisition
4.800 kg
○ Self-exchange
3 days later, he went to Touring Motorcycle shop.
I'm in good shape.
○Drive yourself home when you deliver the car.
It was Short/Two, but
FeeRing has improved since then.
To all of you...
Highly recommended! (^-^) /
View detail
Fits: SUZUKI DR-Z 250, SUZUKI RM 125, SUZUKI RM 250, SUZUKI RM-Z 250, SUZUKI RM-Z 450, SUZUKI RMX 450
It didn't match.
I installed it, but it doesn't fit. It was guaranteed to fit, but it doesn't. I'll return it and buy another one that fits. I will return it and buy another product that fits. View detail
I am satisfied with the limited
I am grateful to still be able to purchase this product as it is an older Motorcycle and parts are limited. View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Z1000, KAWASAKI Ninja1000SX, KAWASAKI VERSYS 1000
Replacement is easy.
ninja1000 is a Quantity:Pair (for Left and Right) Remove the Upper Cowl of the BoltQuantity before Tank:Remove the 2pcs and lift it up to reveal the air cleaner box. Next, remove the screws around the box with a Phillips screwdriver and remove the lid to replace the air filter. This filter is just fit like the OEM one. View detail
Perfect for Hero Xpulse 200 4V
Shipped in 14 days to India, Maharashtra. Excellent service and product. Took a little time in customs clearance but delivered safe and sound. View detail