Reviews
Fits: HONDA CT125, BMW G310R, HONDA MONKEY125, HONDA Cross Cub110, YAMAHA XMAX
The price is too high.
The price is too high.
Should be attached to Exhaust System as Included Parts:.
Parenthesis so good I bought it.
View detail
Lighter weight due to carbonization (can also be installed in 24-year model)
The 24 model ZX-6R has no major differences from the 23 model in terms of front face, meter changes, and compliance with gas emission regulations, and even when comparing videos and images, I felt that there were few changes in the others. I asked Kawasaki plaza to install the coating with the car delivered to me for maintenance.
As a result, they were able to install it without any modification.
NORMAL is made of Gold genus, so Material:Carbon will be used to reduce weight.
I thought it was well thought out with the heat shield tape attached to the reverse side of the product.
Fitting is good with no interference with Exhaust System or Cowl.
View detail
Certainly the holes don't match.
The holes do not align as shown in the previous Review.
It is made to be fastened in three places, but it can be done by cutting the holes on the exhaust system side with a sander and fastening it in two places in the front and rear. It seems to be strong enough, and the NORMAL cover looks lame. It is a good item for those who are considering to use Slip-on Silencer for vehicle inspection and are tired of this cover because it is too shabby.
If you don't mind cutting and shaving, I'd buy it.
View detail
Fits: HONDA CRF250L, HONDA CRF250M
Liquizo Pawaa foot carbon heat guardPC-18326H
I bought it because it was for crf250l and it could not be installed on the current model md47. it seems to be compatible with md38,md44. Please be careful when you buy it. View detail
What's with the mysterious OEM ring guy? For those who wonder...
The mysterious OEM parts were too mysterious for me, and I thought they could have been a little better. I was wondering if there was anything I could do to improve the performance of the car, and I found a steel plate that came with the Exhaust SystemDesign, so I bought it, It is only for dress-up. View detail
It takes quite a while to reach the..,
I had heard rumors that they are a manufacturer with a long delivery time, but I wonder how they are doing as a manufacturer in this day and age if it really takes this long. It is not like electronic parts.
As a result, satisfied with the product.
Outside of supported model year (2BL-PC40) Screws can also be fixed to the limit. However, there is some interference with Cowl and Rear Sets. (Exactly with no Clearance) 。
View detail
Fitted to protect a stock exhaust.
I took a risk & chose the Standard length intermodal model (120mm) to protect my stock exhaust. It seems to offer enough clearance in the event of a tip over. I just hope I never find out for certain. In my opinion this is the best looking out of the silencer sliders available for the z900rs, hence partly why I chose it. View detail
Fits: KAWASAKI Ninja400, KAWASAKI Ninja250, SUZUKI GSR750, SUZUKI GSX-S750, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja ZX-25R, HONDA CBR250RR, YAMAHA XMAX
For Dress-up
Slip-on silencers for the CBR250RR often have a long middle pipe, which is not so good when viewed from the side, but this will make it look cool. The same type of silencer can be found at Jungle for about half the price, but I don't want to put a pirate version on my motorcycle. So, I bought YOSHIMURA genuine products. I think it is good for dress-up, but I think it is also universal because it is only tightened with a 1cm wide Gold Belt. View detail
Fits: HONDA CT125, BMW G310R, HONDA MONKEY125, HONDA Cross Cub110, YAMAHA XMAX
Advanced heating guard
I purchased the GP-Magnum and thought it would be better to use a genuine heating guard, so I bought it even though it was a bit expensive. I am satisfied with the sense of unity and quality. However, I installed it as shown in the product photo, but when my calf touched the gap between the muffler and the flue, it was very hot. . So I reinstalled it to prevent the seams from opening up, and it's a little better. It's hotter than I expected, so I'll definitely have to wear a heating guard. View detail
Fits: HONDA CT125, BMW G310R, HONDA MONKEY125, HONDA Cross Cub110, YAMAHA XMAX
It goes well with the carbon colored Magnum muffler.
The original muffler had a guard, so there was no need to worry about burns. However, after installing the carbon-colored Magnum muffler, I couldn't help but worry about getting burned if I just rode it without a carbon heat guard. After purchasing and installing it, it matched very well with the carbon-colored Magnum muffler. It was as if it came as a single product. .The heat blocking function is also excellent. I recommend it. -------------------------------------------------- -------- There was a guard in the genuine muffler, so I didn't have to worry about burns. But when I was equipped with a carbon -colored Magnum muffler, I couldn't worry about burning without a carbon hit guard. The heat breaking function is also excellent. I recommend it. Powered by Google Translator View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA MT-03
Cool look around Exhaust System
Purchased to complement the joint section, which was not looking good when it was replaced with the company's Slip-on Silencer.
The cover that comes with the Normal muffler is a blindfold for the silencer joint, but the Other Brand Product has no blindfold for this joint, making it look not so good.
When the cover is installed, the joint part is blindfolded and becomes the original CowlDesign.
It looks better, but the Clearance is quite Limit, and in my case, I had to pull and deform the Bracket to contact the Exhaust pipe.
View detail
The best item to protect your muffler
In Korea, full exhaust muffler structure changes are no longer possible.
As a result, the 4-shot muffler of my cb1100ex became rare.
This is the only item that can protect an expensive muffler in case of a fall.
The product photo looks like rubber, but it's made of hard aluminum so it doesn't break easily. -------------------------------------------------- -------- In Korea, it is not possible to change the full exhaust muffler structure. As a result, the four -foot mufflers of my CB1100EX have a scarcity. It is the only item that can protect expensive mufflers in all cities. The product photo came out like a rubber, but it is hard aluminum, so it doesn't break easily. Powered by Google Translator
View detail
Fits: KTM 690 SMC-R, KTM 690 Enduro
Carbon
[How is it used?
Mainly Touring
Was the one you received as per Image?
YES
Was the installation difficult?
Easy!
How was your experience with it?
Better looking.
[Included Parts:were they on?
It is not.
[Was there anything that disappointed you?
No, sir!
View detail
Used to replace Exhaust System of CRF125F
We have replaced the Exhaust System of CRF125F with DELTA products.
Installed; NORMAL Guard will not work.
Therefore, we installed the same product as recommended by the manufacturer? The same product recommended by the manufacturer was installed.
Exchange is Quantity:It is easy as it only requires 2pc Bolt and Band.
I thought 15 minutes would be enough time to work on it.
It is also effective in blocking exhaust heat and idles for a while.
After turning the Engine with Ring, put on the Gloves.
I've tried touching it, but it doesn't feel hot enough to melt.
It was
(If the Engine is heated by Race or other means by continuously turning the Engine.
I haven't tried to see what happens.)
The texture is solid, and even a slight bump is not enough.
I am relieved that it does not seem to be broken.
View detail
Fits: HONDA CT125, BMW G310R, HONDA MONKEY125, HONDA Cross Cub110, YAMAHA XMAX
Carbon heat guard
I like it very much. It’s clean and you should know about Yoshimura’s quality!! Very satisfied!! I was skeptical because it was delivered from Japan, but the delivery was fast and the packaging was neat. We Bike is the best. It matches perfectly with the Yoshimura muffler I bought together. The fitting is also accurate and I am very satisfied ----------------- ----------------------------------------- I really like it. You have to know the quality of Yoshimura! I was half-hearted because it was shipped in Japan, but the delivery is fast and the packaging is clean. Powered by Google Translator View detail
Fits: HONDA CT125, BMW G310R, HONDA MONKEY125, HONDA Cross Cub110, YAMAHA XMAX
Performance is good
I think it is a necessary product in terms of design, but it also has excellent performance. I think the Magnum muffler is like that. The muffler end body is a bit hot, and the middle connection part is more hot. This is a must-have item if you are thinking about tuning your Magnum. Don't burn your legs ---------------------------------------------- ------------ I think it's a product that I need in terms of design, but it's also excellent. Magnum muffler seems to be like that. The muffler end body is a bit more open and the heat of the intermediate connection area is even greater. It is essential if you are planning to tune Magnum. There is no image of legs Powered by Google Translator View detail
Fits: HONDA CT125, BMW G310R, HONDA MONKEY125, HONDA Cross Cub110, YAMAHA XMAX
protect me
It feels like quality and texture information is properly carbonized It's good to protect against the feeling of use against muffler heat Product to purchase together 110A-400-5X50 If you install the Yoshimura muffler, it is recommended to purchase it together The difficulty of installation requires some finger strength It's easy to install from the beginning, but it's hard to install mufflers and carbon cases Cost performance and comparison with other products are expensive... WeBike packaging is always great, arriving in a week for delivery and packaging Concerns, precautions, or advice when purchasing It should be installed when there is no muffler heat, and it is expensive, but if you install a Yoshimura up muffler, it is recommended to purchase it together View detail
Fits: KAWASAKI Ninja400, KAWASAKI Ninja250, SUZUKI GSR750, SUZUKI GSX-S750, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja ZX-25R, HONDA CBR250RR, YAMAHA XMAX
Dress-up
I bought this for a dress-up.
Installation is not difficult.
The texture is also very good and very Parenthesis.
The only drawback is that the Gold amount is high,,
View detail
Recommended
We installed this product to replace an external Exhaust System on a CRF-125F.
The price was lower than other manufacturer's products, which was the deciding factor in my decision to purchase this product.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA MT-03
Outstandingly cool.
Seriously cool ?? texture is good! View detail