Reviews
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
I think it's good
The installation itself is easy:remove the OEM and install this Light as is. There was no special modification. The glass surface of the Headlight looks like this, [Color] Now that it is Clear, I think it looks pretty cool. The brightness is not as bright as the OEM light lens, but the light distribution is more variable, and with the LED bulbs, it seems to be bright at a single point. View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
When I changed to LED Bulb.
LED Bulb light now illuminates the front of the car. View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
Used in xr100 MOTARD
I bought this product because the OEM Product was too dark when I switched to LEDs for the Valve, and the forward illumination is much brighter than the Normal. View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
It's so good.
The darkness of the unspoken early XRHeadlight. 95 model.
The brightness has been dramatically increased by replacing it with this unit.
New, made in Japan, Multi-reflector, and even a light bulb at this price.
It is the best cosmetic product. Installation can be done by simply replacing the Light Adjustment Angle Screw with the original one.
Seriously, it's the best.
My problems were solved without buying expensive related Parts.
View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
LED
This is a re-evaluation as I have converted to LED.
The Valve I used is PIAA Headlight Bulb LED 6000K DualBeam 12V 5/6W H6M for Motorcycle. (PH7 equivalent) It is
The XLR80R is an all-AC car, so the Valve I chose is an alternator and supplies.
Simply replace with a Halogen bulb and the job is done.
Since the Multi-reflector Unit has more depth than the OEM Headlight Unit, we were able to install the PIAAValve, which is almost twice as long as the Halogen bulb, without any interference.
Also, because it is a multi-reflector, it does not cause the high-low inversion phenomenon that often occurs when using OEM headlight units with LEDs.
The Clear Lens Multi-reflector is LED, so it is very bright. The spread of light and the height of the light are not a problem, and the safety is increased by introducing LED Bulb.
View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
become brighter
The OEM Cut lens has thick and dark glass. This product has Multi-reflector and thin plastic lens, so it is much brighter than the Halogen bulb.
If you use LED or HID with Cut lens, the optical axis and high low will be Brown and bitter Brown, so it is necessary to use Multi-reflector.
The point to be concerned about in the installation to XLR80 was glad if it was attached with Seal or Rubber plug of the hole blocking at least because Position is unnecessary. it has a feeling depth than the OEMHeadlight unit, and it is difficult to organize Harness. Sponge tape is necessary to fill the gap with Cowl. The optical axis adjustment screw, spring, and screw receiver plastic need to be used with the OEM product. These are the things that I think.
Although there is a point to be concerned about, it becomes bright visibly only by exchange of the Headlight unit. There are various opinions that the making is cheap, the paint peels off, and the Position unit is loose, and I agree with that point, but when I think that it becomes bright easily, and it becomes a stepping stone to LED conversion, I thought that it was a product of high satisfaction.
View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
Changed to LED Headlight
I bought this to use as a LED Headlight.
The position lamp can be attached, but I don't use it, so I have blinded it.
View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
Very nice
When I ordered related products for xr motard, I found that only one product can be ordered. For its appearance, the transparent part is very crystal clear, but I am also annoyed by it. I hope it will be better if there are more color choices. . View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
Definitely brighter
I used to be stunned by the darkness of the flashlight of a long time ago, but this product is definitely brighter The latest LED Headlight Standard However, the latest LED HeadlightStandard EquipmentMotorcycle is not far behind
XR100MOTARD does not have the same connector as the XR100MOTARD, so soldering and processing of the terminals are required It is
Moreover, a Position lamp is attached, but there is no use for it I blocked it with tape
I would have liked to see the Multi-reflector used as an OEM since I drive a moped at night
View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
The look and brightness of the Headlight has been improved in the Large width
Results of installation
The historical Lens cutType was replaced by the Multi-reflector Motorcycle itself feels rejuvenated
The brightness that was thought to be reduced by Lens cut became the original brightness of Valve
(Valve uses DAYTONA's high efficiency Valve 25W, not the included Blue)
There are some points to be improved as follows, but it is an alternative to OEM parts that can be installed with almost no modification If you think about it, it's what you'd expect
The difference between the product photos on the web and those on the web
In the photo, the HeadlightBody and Bracket have a glossy platting look The paint is a solvent that is used to degrease the paint (for reasons to be explained later) Thin? It's thin?
3. Installation
Because the KAWASAKIBracket interferes a little with the Cowl, a little in Pliers Connected to each other and removed with Gold genus fatigue to deal with it
Because the bracket for adjusting the optical axis interferes with the cowl, it is necessary to bend it slightly
Screw and spring for optical axis adjustment are included in the product Includes Parts:(Screw is thicker than the hole in the cowl but no problem (Screw is thicker than Cowl's hole, but no problem)
Wiring of the headlamp does not match (Male and Female of Bullet Terminal) Female is partly reversed), so if you process it is OK, but use the vehicle OriginalWiring
Position lamp
As mentioned in the other imprints, Material:Rubber's SocketPlug is scuffed and comes off with little force
The rubber plug is a soft material, so if you put on and off the plug several times, it may get cracked And then, the scum comes out
It would have been better if it was a solid and rigid rubber, but it was not reliable The SocketPlug was removed and the hole was covered with Aluminum Tape (Confirmed that the paint can be thinned with solvent by degreasing at this time (Confirmed that the paint is thinned with solvent by degreasing at this time)
Because the headlight is always lighting, if it is a position lamp of this degree, it is unnecessary It is good without original
5.Rubber cover of Headlight Bulb
The material of the rubber may deteriorate quickly, so we have to make sure that we can use it in the vehicle Installations
Installation is not a problem as long as you pull it on firmly
6.Others
The LampLens was scratched, even though it was supposed to be new
I was dissatisfied with the initial quality control (pride and love for the company's products), although I put up with the scratches as they would eventually appear
Because of the scratches, the Material (or surface treatment) of the lens itself is soft Maybe it is
View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
The effect was Large
I use it with XR 100 MOTARD, but it got brighter than I imagined. You can see clearly that OEM's light distribution is not good.
Installation is easy, but I think that some ingenuity is required. Socket and Waterproof Cover should better use OEM (It is usable normally). Apart from Reflector, it was made quite reasonable.
I think that it is inexpensive against the effect. LEDs and HID will also be brighter.
View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
Coarse making in various places
I purchased the odor of OEMLens with Lens cut to manage it.
According to other reviews, Position lampWaterproofRubber is already loose at the time of arrival - The terminal of the contact part with the Valve of the PH7's Socket is disconnected, there is considerable difficulty in fitting etc. etc. , I decided not to buy it by paying 4000 yen.
As a result I bought Lens with a warehouse and OEM brand new item.
Compared to Lens which was blurred with Yellow for years, the new item is cheap as it is a little 2000 yen at Beauty to fluffy.. I wish I had made OEM brand new from the beginning.
View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
Hi all, This headlight lamp is a great alternative to the OEM unit, great quality and finish, Fits perfectly. I would highly recommend this item.
Hi all, This headlight lamp is a great alternative to the OEM unit, great quality and finish, Fits perfectly. I would highly recommend this item. View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
Mounting on Friend's Full normal KSR
* I attached it to my friend's KSR. It is a representation of my friend.
【What made you decide the purchase?】
Light was quite dark
【How was it actually used?】
It got pretty bright
Use Valve included
【Was it difficult to install? (Hard parts case)】
I scraped a little light cowl
【Please tell me the point of installation and hang (in the case of Hard parts)】
If the drip-proof Cover? Is an OEM, a gap can be formed, so remove the LightConnector,
Set the attached Cover finally
Do not be afraid to do it carefully Large durable
[Is there anything I was disappointed about?]
When Position bulb socket wears on Multi-reflector, it goes through with a throat.
【Hope for Manufacturer - Please let me know if there are any improvement points】 Required
Outside diameter of Position bulb socket? Precision of hole of Multi-reflector.
【Have you compared items?】 Required
LED Light
[Others] Any
I will add it if my friend says something.
View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
It will be brighter than OEM.
Light of the off-road motorcycle, especially the old car of 90`s is dark! But LEDs and HID are Battery reply vehicles .... Also, Wiring processing and Included Parts : I also have to secure a mounting location for. What a person Recommends here!
Wiring just connects like an OEM! Cat's-eye just branches off from Low beam and just takes it away. (It disappears at the time of High beam)
It got brighter, it's about +1 mass from the torch of dragon Quest. (Oops! It is hard for a young person to understand?
The difficulty is that Rubber of Cat's-eye falls into polo-polo and falls out without permission, so so-called booger Bond (G17) Lightly point with.
Also, although it may be only yourself, the optical axis is facing upwards, especially on the Right! It is like turning the face of the opposing pedestrian battlely.
Since it is impossible to adjust with Adjustment Screw, paste Rubber on Cowl's contact surface and fix it.
It is easy to install and we are holding down the price, so it seems worth it!
View detail