Reviews
Great Value
Perfect for the price. Fittment is great and very easy install. Mirror quality not 100%, but more than enough (given the cost). Fine if you are use to bar end mirrors. Two-way fit option is great. Perfect for the Hurricane bars. View detail
I installed it on my Grom. This is cosmetic.
I used it on a JC75 Grom.
I had been wearing Mirror by Mukawa, but I wanted to try Bar end mirror, so I was shopping around and this product caught my eye.
I bet the build quality is shoddy at this price...
I was surprised when I saw what I received.
Aluminum's Cut-outs were very well done.:Pair (for Left and Right) The price is surprisingly low for a
Grom's STD Handlebar has an M6 screw hole inside, so we used only the screw with the supplied Bar End Rose.
There was no Clearance with the Grip at all, so I used a Washer that I happened to have and Offset it about 4mm outward.
Mirror itself is quite small, but can it be used for practical purposes? It is like "Limit". Visual confirmation is necessary when changing lanes.
Thanks to the Handlebar, there is no vibration at all, which I was worried about.
The color of the mirror was also Blue in the Defferential Gearo, but a Plain mirror for replacement is also included, which is a perfect addition.
It is a little uncomfortable until you get used to it, but there is a Bar end mirror.
View detail
Looks good Parenthesis.
I put it on Up.
I can see more than I thought I could, but it's small, so I have to check visually.
I think there is quite a bit of flexibility in adjustment.
The M8Screw weight bar was left over, so it was installed using an M8→M6 InsertNut.
I think it is very Refreshing and Parenthesis like STREETFIGHTER!
View detail
ZOOMER Separate shop
I haven't installed it yet, but it looks very solid and luxurious. View detail
It has a luxurious feel to it
I was looking for a Mirror that would look good on MOTARD.
Certain Manufactures used by foreign countries are not affordable because of their outrageous prices, but this Mirror is not cheap for the price.
There is little rattling and no shaking while driving.
I did not use the supplied bar end parts, but prepared and installed a separate Clamp on the Handlebar.22φIt seems that the Handlebar can be used without the Clamp.
View detail
it's the best
It was a good decision to switch from a Swallow handle to a Continental handle.
Best
View detail
ZOOMING
I purchased it and it was the right decision.
I had a lot of trouble with the length, but it was JUST right.
I look forward to working with you again.
View detail
For ZOOMER use only
I switched from DAYTONA's Swallow handle.
Positionally it was good.
View detail
Bar End Mirrors from Rin Parts
* About quality and texture, Durable black painted finish over the aluminium housing and mounting brackets. * About the feeling of use, Extremely happy with the low profile look of the front area and I can now see clearly what is behind me. * Products to buy together, To tidy up the front area further a nice set of machined aluminium brake and clutch levers. * Difficulty of installation, The installation with aftermarket handle bars is just insert into the end of the bar and tighten down the allen key bolt, then remove the Honda OEM ones and plug the mounting holes. The process was completed in 30 minutes with no difficultly. * Cost performance and comparison with other products, No cheaper bar end mirrors of this style and great quality for the price. Webike do offer much fancier designs and machined aluminium finishes if your budget allows. * About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems. * Any concerns, cautions, or advice when purchasing, If you still have the Honda OEM handle bars installed then you will not be able to just insert into the end of the bar and tighten down the allen key bolt, modification of the setup will be required. Use the product reviews to assist in making a decision on your purchase. View detail
RIN PARTS Bar End Mirror
About quality and texture - Top quality. Cast aluminium body with a nice chrome finish to match the old school style motorcycles. About the feeling of use - These are much better looking style wise then the OEM Honda lollipop mirrors and I now have more visability behind me due to the wider mounting position of the mirrors. Products to buy together - After removing the OEM mirrors you will be left with exposed bolt holes in those mounting points, so you will be wanting so blanks to cover these up. Webike offer plastic ones at a low cost which blend in well or cnc machined ones if you need to add some bling. Difficulty of installation - Once you remove the OEM bar ends on the Monkey their will be inserts let in the handle bars which you can use to mount up these bar end mirrors once you discard the spreader rings. Easy install that will take 30 minutes to complete. Cost performance and comparison with other products - These bar end mirrors are on the cheap end of the pricing scale but I find the quality tops for the money. If you want the best bar end mirrors out there then you'll want some CNC machined ones at a much higher cost. Webike have a great range to choose from. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - Take into consideration the diameter of your handle bars when looking for bar end mirrors as these will not fit fat bars due to the larger internal diameter. View detail
Rin Parts Rectangular Mirror VR1
Good angle and size without being too big and bulky. Price is very reasonable. Very good to include adapters for many types of bikes. I like the blue tint which clarifies the view a bit. Should fir very nice on my bike. View detail
RIN PARTS Bar End Mirror
About quality and texture - Top quality. The surface finish from the CNC machining is so much better then the plastic OEM mirrors. About the feeling of use - They mount firmly to the handlebars with zero vibration even when idling the bigger 1200cc V-twin. Products to buy together - Some short CNC brake and clutch levers go together nicely with these mirrors. Difficulty of installation - Installation process is easy and can be accomplished with just an allen key but I did find that I needed to add a spacer on the throttle side to stop the mirror binding up on the throttle tube. Cost performance and comparison with other products - $32 AUD for a set of anodised CNC machined mirrors Just as good as the expensive ones and I'm not a fan of spending big dollars on mirrors as they are something I damage quite easily. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - These mirrors have a convex lens which can be strange to use initially but once you get use to them I find them much better then a standard flat mirror. View detail
It's cheap, but the shape and performance are both perfect.
It's cheap, but the shape is cool and can be installed on any motorcycle as long as you have an adapter.
The quality of the detail is there, but... It's cheap. "If anything, I'm lucky to get it at this price. I think it's just about the right amount to give up.
It is recommended for those who want to introduce the Bar end mirror easily.
The mounting area of the Mirror is about 30φ.
View detail
I changed it to Bar end mirror
What made you decide to buy?
I wanted to replace it with a Bar end mirror for some reason, so I did.
I also chose this product because it is reasonably priced and if you don't like the Bar end mirror you can give it up.
How was your experience with it?
After replacing the bar end mirror, it took some time to fine tune the mirror position, but I think it is better than the OEM position. I think it is dangerous to change lanes only with the mirror. When you change lanes, it is better to check the safety of your rear. You should not overdo it in order to prevent property damage accidents.
What is the point or hang of the installation?
When I installed the Daytona Horizontal mirror, I also installed the Heavy weight Nut for M8Nut to reduce the vibration of the handlebar. Along with the Bar end mirror replacement again this time, I wanted to install Heavy weightNut, and purchased Heavy weightNut for M5Nut. The place where the installation work was done to the Bar end mirror ・・・・Bar end mirror is M6BoltSpec. and it is the confirmation insufficiency of my grudge. (Reflection) If this is not done, the Heavy weight Nut which I purchased cannot be used. When I was about to give up the installation, M5 and M6 is 1mm difference.... Heavy weightNut is cured sufficiently and fixed with Vise, Tap is put up carefully. The work is Don't push it! I proceeded with the work carefully so as not to break the tap forcibly, and Heavy weight NutM6Spec. was completed. I was able to install it safely to the Bar end mirror of M6BoltSpec. By the way, the processing work is self-responsibility work.
View detail
I'd buy it if I switched
Because the Mirror of OEM extending upward is badly parenthesis
I always replace them
It's easy to install and you can see the back of the car
It fell off once while driving, so you need to retighten it occasionally
It's large enough to not detract from the look of the motorcycle
The XSR I'm riding now has a brand called High Cider with a Bar End
In use in combination
I don't care if it breaks because it's cheap
View detail
Cost performance is good, quality is good
I bought it to make a Bar end mirror
I wasn't expecting much from the price
It's unexpectedly well done
It's a fairly wide angle Mirror
Small size, but with a fairly wide field of view
Support
In addition, the lack of blur was also in line with its previous reputation
As a product
I have no complaints at all
This is too wide of an angle
On the other hand, it's also a weakness
The nearest one
Because it's quite far away in the picture
The car I thought was behind me
In fact, a visual check
It's pretty close and scary
On the other hand, cars that are a bit farther away
It will be a pea grain on Mirror
View detail
I love them, because not just a mirror, they fuctioning as the bar end stabilizer too, reduce the vibration on my handlebar. The mirror is looks very nice, reasonable prize but good build quality. It's fit the low handlebar on my bike, and make the cockpi
I love them, because not just a mirror, they fuctioning as the bar end stabilizer too, reduce the vibration on my handlebar. The mirror is looks very nice, reasonable prize but good build quality. It's fit the low handlebar on my bike, and make the cockpit looks simple without ordinary mirror. View detail
Cheap but good Grip
It is quite cool for the price..
Bar End is integrated but it is okay to save labor
However, I will move a little boyobuyo.
Since various colors are being lineuped, it may be good to buy some color and change it in the mood.
It is recommended.
View detail
Simple and good feeling of lowness in car height!
【What made you decide the purchase?】
It is a compact shape.
Bar end Because of the nature of the mirror, the width of the car will inevitably widen, but for this product it will be the smallest limit.
【How was it actually used?】
Although the specular surface is Small Shark, the convex mirror spec not specified in the item description Spec. Thanks to that the visibility is wide and good. Bar end mirror So, there is a benefit beyond thinking that it can indeed be installed in a good mounting position on the back of the mirror.
It is affordable product but I do not feel cheap,
It's pretty satisfying that it appears more than I had imagined the feeling of lowness in the car height with a simple look.
【Was it difficult to install? (Hard parts case)】
Throttle cone and Grip were both very simple because we were planning to install Bar End and changed to Penetrating shaped objects, but if you have not made any changes etc, please do the processing or the above mentioned corresponding to Penetrating shape Parts Change is required.
【Please tell me the point of installation and hang (in the case of Hard parts)】
To happy newbies, this is also not mentioned in the item description, but Hexagonal WrenchQuantity necessary for installation of this product : 2pc is attached.
Bar End It is a simple hang which is common in products, but at the time of inserting the installation part into the Handlebar, it has resistance to some extent and it is press-fitted and then inserted, lightly Pliersetc. Hold on (Wound, like no deformation) , It would be better to close down with the included Hexagonal Wrench.
Even if you plug in loose state you will continue to spin around Hexagonal Wrench forever.
[Is there anything I was disappointed about?]
It is not something like expectation ...
When traveling at night, than usual Mirror,
This may also be due to the low mounting position of the Bar end mirror, but the light of the following vehicle can feel dazzling.
【Hope for Manufacturer - Please let me know if you have any improvement points]
For the glare that may be caused by the low installation position of the above-mentioned Bar end mirror and the appearance improvement, the mirror surface Blue MirrorVer. I want.
Resin Parts are adopted in the mounting part, but even if it is quite tightened it tends to move due to the low resistance of the resin, so the common Material : You may choose Rubber's things.
【Have you compared items?】
Takatsu Trial mirror (Reverse attachment)
[Others]
None.
View detail
Angle of the bar gives a relax posture on the grip. The finishing chrome are of fabulous chrome with the Knife Cut design giving the slick semi low angles. Length are perfect not too long and not too short where a few clamps of purpose as such Hp mount, G
Angle of the bar gives a relax posture on the grip. The finishing chrome are of fabulous chrome with the Knife Cut design giving the slick semi low angles. Length are perfect not too long and not too short where a few clamps of purpose as such Hp mount, GPS Mount or any other etc mounts acceptable. View detail