Reviews
Since M5.
I bought it because my homemade Fender Eliminator cracked when it was brittle.
I chose this one because Screw was M5.
It is a very normal reflector with no particular problems.
View detail
Great Value
Perfect for the price. Fittment is great and very easy install. Mirror quality not 100%, but more than enough (given the cost). Fine if you are use to bar end mirrors. Two-way fit option is great. Perfect for the Hurricane bars. View detail
Dangerous to say the least.
These forks are really poorly welded at the axle points, and the nub that holds the drum break housing wasn't attached straight. But I still fitted them, and they worked ok. Two weeks later, the left fork failed catastrophically while I was doing a pre ride break check. And BREAK it did. The axle point broke away at from the "weld", that was more like a tack than a weld. It was so bad, parts that shouldn't have powder coat paint, was powder coated. This tells me that there is ZERO quality control at RiN-Parts. If it wasn't for the honda bike checklist that was drilled into me, I would be writing this review at my local hospital. !!! DO NOT BUY THESE FORKS !!! View detail
CALI Seal
When CALI seals are affixed to the License Plate, the adhesive residue can be a problem when replacing the seal. In the first place, due to the excessive number of registered vehicles in some municipalities, the number of letters on the plate may be too many, and the plate may be covered with the letters, making it difficult to affix the seal neatly.
The product in question is just a Plate that provides a dedicated place to affix a CALSeal next to the License Plate.
It is a simple Level product that some people can cut out of steel or acrylic plate and make themselves.
However, when I picked up the product, I found it to have a nice texture, and considering the time and effort required to make it myself, I think it is an easy and cost-effective product.
However, I am a little afraid that I might scratch the Dustclothetc. when wiping it off when washing the car.
View detail
Cospa is quite good.
Anyway, cheap is the best Merit.
The quality is in line with the price, especially the bolt on each part is quite cheap. Be careful not to over-tighten the bolt, as it can easily be nipped.
It is by far lighter than the expensive bar end mirrors of DAYTONA and TANAX, so there is rather less anxiety about it falling off.
View detail
Minimum required visibility
Size is small, so visibility is minimal.
On the contrary, it makes you look at it neatly lol.
It only worked well outward, but I don't feel like I've widened it that much.
With normal Mirror, the arms are reflected to a large extent and the camera is scared, but this has been eliminated, which is what we were aiming for!
Quantity of Washer:Only 1pc. is sandwiched, but there is no interference with Axel
Adjustment is a bit of a hassle…I had to adjust the angle of the clutch lever because it was interfering with the clutch lever.
Well, the rest is definitely Parenthesis good lol.
View detail
A little wobbly, but … looks good.
I installed it on CBR400R.
The handlebar was previously replaced and installed with 16mm inner diameter separate handlebars.
It will probably loosen and fall off while riding, so it must be retightened.
There is a wobble.
If you're concerned about it, you shouldn't.
View detail
Rin Parts Rin Parts LED compatible rectangular blinker relay
Purchased as a spare for LEDs.
Blinker relay for MADMAX MADMAXLED is better in terms of texture
But it's inexpensive in price, so I thought it would be just right for Spare.
View detail
Functional Parts for a Bland Bolt
[How is it used?
For fixing Bolt of License Plate of SEROW250 which is used for mountain play.
Just by replacing the inorganic fixing Bolt with this product, it will look better, and it can also be used as a Net fixing Hook for when you have a lot of baggage. Two for the price of one. PARTS.
Was the one you received as per Image?
I saw a friend's Motorcycle that had already installed this product when I didn't know it existed yet. What is this aluminum color that looks like a very small version of the Tezuga?" When I asked him about it, he told me that it was a product installed for the above-mentioned purpose, so I immediately took a crack at Ideas.
The product was as per Image because of such a process of purchase.
Was the installation difficult?
The difficulty level is low because all you have to do is remove the bolt that was attached to the License Plate and install this product, and I think that anyone can easily customize this part.
How was your experience with it?
Most of them are free dress-up parts, but they are used for fixing the Hook of Net for Motorcycle when we carry a lot of luggage with Motorcycle, which happens a few times a year or not.
It is seldom used for functional purposes, but it is useful when it is.
Well, it's a bit of a duplication. Color Anodized Aluminum Collar Dress-upSmall things.
[Included Parts:were they on?
As you can see in the picture, each color Aluminum Collar, Cap bolt (length is about 20mm?), Nut, Nylon washer×2 and 1 piece of Iron Washer are included. and Nut and Nylon washer×2 and 1 piece of iron washer is 1Quantity:Set, and itsQuantity:Two Sets are included in the package.
[Was there anything that disappointed you?
My friend who used it before me bought the Red one, but after about a year or so the Anodized staining faded and it became just Silver, so he painted it Red with plasticolor and dyed the hollow side line White (it was exactly the Image of Zunga).
Anodized light colors may fade quickly.
Other items that would be helpful
Point and hang of installation
Even though the collar is sandwiched, it is basically a fixed Bolt. "Tighten with the proper Torque." I don't think there is a problem as long as the
"Loose and falling off." If you are concerned about the "Mere Old Man", it may be a good idea to replace the existing nut with a Lock nut.
[Availability and clarity of the Instruction Manual
No Instruction Manual, as noted above. Bolt & Nut+α for fixing So no problem.
It can be used not only for fixing License Plate, but also for fixing M6Size, so it can be used in various ways depending on each individual's Ideas.
[Notes]
Not particularly
[ITEMS TO BUY TOGETHER
Basically, no.
Bolt & Nut, Aluminum Collar, and Washer in Quantity:The set is complete, so if the purpose is to fix the License Plate, this product is all you need.
[Opinions and requests to Manufacturer
2Quantity:Considering that the Set costs about 910 yen, I would like to request a more UV-resistant dye.
View detail
Slight appearance change
I was looking for a Case to put my CALI certificate in and happened to come across it in a search and it was cheap, so I bought it.
I didn't like the position of the Sticker on the local number, so I'm glad I chose this one.
It is a product that is only for appearance, but I think this kind of product is also interesting and White.
View detail
Fine material seat covers
Honda Zoomer seat (ruckus nps50) reupholstered and it looks sleek. Waterproof. Too bad they are not available from Honda, but they are certainly a good way to upgrade your saddle if it is broken. -------------------------------------------------- -------- Chair of Honda Zoomer (Ruckus NPS50) again dressed and it looks tight. Waterproof. Too bad they are not available from Honda but certainly a good way to upgrade your saddle when it is broken. Powered by Google Translator View detail
Visibility is ◎ but certainly not water resistant & UV resistant
The quality is good for the price and the visibility is good, so it's not bad.
But it is certainly vulnerable to UV rays and rain lol Cokingetc...I think you should take your own measures!
View detail
fat eyes
I bought this LED because the same one was out of order.
Quantity:2pc. One of the Set is the out-of-quantity:1 Set of 2pcs. so I had no choice but to use Quantity:1 Set of 2pcs.
Lynn Parts LEDs last 2 yearsQuantity:2pc. One of the Sets is still Large sturdy, but we have now added a Quantity:2pc. Quantity of Set:Since I purchased the Set, I put on the newly purchased LED Light.
This product is sturdy and durable, both high and low Large without flicker.
View detail
Simple and Stylish
It is simple as a bracket and the reflector is thin, so I am satisfied with the reflected look.
It is not cheaply made and is solid.
View detail
SHINKOTire from MICHELIN Tire installed on ZOOMER Rear
Changed from MICHELINTire130/70/12 to SHINKOTire130/70/12, Front mounted SHINKOTire110/70/12 on Falken 12-inches. View detail
License Plate Light Measures
Wiring is quite thin, so Quantity of Wiring to Gibbon terminals.:I plugged and crimped 2pcs. The brightness is just right for illuminating the License Plate. I think the durability is the only thing left to be considered. View detail
Integrated Aluminum Bar End
The rubber grip has deteriorated and rotted, so I replaced it with this one, which can be easily removed by spraying some parts cleaner in the gap between the grips. I think the durability is good, but the cost performance is very good. View detail
Good budget mirrors with a better viewing angle
About quality and texture, I can confirm that the quality is good and that the material used is aluminum alloy that has been machined to shape. About the feeling of use, These mirrors are less instrusive then the original mirrors and when fitted to the bike also offer a better viewing angle from their convex designed mirror. Products to buy together, While working on the handle bars it would be advantages to also add a set of more comfortable grips to your cart. Difficulty of installation, I can say the fitment of the bar end mirrors for my installation was very easy due to the simplistic design of how the mirrors secure to the inside of the handle bar pipe. Cost performance and comparison with other products, The pricing of the product is great. You receive a set of bar end mirrors that are of good quality and a great look. The pricing of the majority of the other bar end mirrors available are much higher for similar product. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
I installed it on my Grom. This is cosmetic.
I used it on a JC75 Grom.
I had been wearing Mirror by Mukawa, but I wanted to try Bar end mirror, so I was shopping around and this product caught my eye.
I bet the build quality is shoddy at this price...
I was surprised when I saw what I received.
Aluminum's Cut-outs were very well done.:Pair (for Left and Right) The price is surprisingly low for a
Grom's STD Handlebar has an M6 screw hole inside, so we used only the screw with the supplied Bar End Rose.
There was no Clearance with the Grip at all, so I used a Washer that I happened to have and Offset it about 4mm outward.
Mirror itself is quite small, but can it be used for practical purposes? It is like "Limit". Visual confirmation is necessary when changing lanes.
Thanks to the Handlebar, there is no vibration at all, which I was worried about.
The color of the mirror was also Blue in the Defferential Gearo, but a Plain mirror for replacement is also included, which is a perfect addition.
It is a little uncomfortable until you get used to it, but there is a Bar end mirror.
View detail
Looks good Parenthesis.
I put it on Up.
I can see more than I thought I could, but it's small, so I have to check visually.
I think there is quite a bit of flexibility in adjustment.
The M8Screw weight bar was left over, so it was installed using an M8→M6 InsertNut.
I think it is very Refreshing and Parenthesis like STREETFIGHTER!
View detail