Reviews
Grip force is increased and can be felt even in city driving.
[How is it used?
I bought this seat as a for re-covering because the normal seat for WR250R that I bought used was not in good condition.
The vehicle itself was also purchased used, but the Seat is a SPIRAL Complete Seat, the same as the Seat cover I purchased this time. With Stages Seat I found it difficult to use, so I bought a second-hand Normal seat.
I had already heard that someone I know uses this product and had heard reviews that the grip of the Seat Cover is good and easy to use, so I had no hesitation in purchasing it.
How did you like it?
As Mr. Manufacturer claims.
The original non-slip material is used, which is more grippy and durable than the existing Seat cover in a larger width.
Different materials are used for the top and sides of the cover, allowing for excellent machine control. As it says, it grips firmly when riding and improves the hold of the vehicle body.
My personal driving skills are low and I only play with low specifications for walking on forest roads and playing in the mountains, but the Seat's grippy feel is dependable, and I expect the Seat fabric is thicker and more durable than the OEMSeat Cover.
How did it compare to other products?
I can only make subtle comments because the only comparison is SPIRAL's with Stages Complete Seat, which was replaced in a short period of time, and the Normal Seat, which has a hardened Seat Cover. The Seat Cover itself is soft and elastic, so it is very good for a few hours of riding without getting tired. (Seat shape is NORMAL, so the surface of the buttocks will be sore after a long run.) 。
In my personal opinion. Seat CoverSingle Body price is a little high?" I think it's a good idea, but I'm not sure if this performance is enough to convince me. I think it is acceptable for this kind of performance.
[Points to note]
The seat cover itself is sewn three-dimensionally, so it is easy to put up, but the reverse side of the seat base of the WR has a rather complicated shape, so there are many parts where it is difficult to put up the tucker.
As I mentioned above, when reupholstered with STD Shape's Seat, the Siri will be sore after a long ride! (Due to the nature of OEMSeat) If you want to avoid this, you can make the seat wider or install shock-absorbing materials.
Purchasing a Complete Seat may be an effective way to do this.
Other items that would be helpful
The deciding factor in the purchase
Performance of the Seat fabric itself.
The Large was inspired by an acquaintance of mine who was using the same product.
[How is it used?
We use it for mountain play and Flat forest walks.
It is a little too heavy for me, so I don't use it for difficult Attacks, but I really enjoy Flat forest roads.
【Included Parts:presence or absence】.
SeatBody and a simplified Instruction Manual are included.
[ITEMS TO BUY TOGETHER
Tucker& needle with short legs to stop Seat if this is your first time reupholstering. (core? ball?) If you want to make it waterproof, use Vinyl sheet. (Garbage bags are also acceptable) The Coking agent may not be necessary since the sewing is done by Crimp Type.
Opinions and requests to Manufacturer.
I think it would be great if the slightly older Minor car models etc. could also be expanded into a lineup.
View detail
It did not suit me.
[How is it used?
It was installed from the beginning on a used WR250R that I bought about 10 years ago.
The premise is that the previous Owner had a short Rear shock ride height adjustment Quantity:I was not sure if it was the Seat or the Shock adjustment that made the footing better (there was no Normal seat when I bought the car).
The car was delivered at Motorcycle shop and on the way home. I want to replace Seat." I sold it after I got a used Normal seat.
How was your experience with it?
Seat surfaceFront is depressed like a road motorcycle, which makes it difficult for the rider to move the front and rear seating positions while driving in a seated position, making it boring to ride in an off-road type vehicle.
Since you have purchased a Dual PurPass vehicle, the front and rear Quantities:Pair (for Left and Right) I am a person who wants to enjoy weight transfer by freely changing the seating posture to Seat not needed at all." It was
I later learned that the Seat has been changed from the Sponge inside, but since I sold it after purchasing the vehicle without examining this product for the reasons mentioned above, I have no idea about the afternoon ride over long distances, etc.
I have no good or bad impression of the Seat Cover. Normal It was
If I'm honest, I'd say it's a Seat for city driving or touring out with an on road motorcycle.
How did it compare to other products?
I would compare it to the OEMSeat that replaced the remains of this Seat, but the OEMSeat was better for me.
I'm sorry that I don't quite understand the advantages of this Seat, but if the Front seat is lower than the OEMSeat... It is suitable for people who are not comfortable with the footing of a normal seat." It may be.
[Points to note]
If you try to move the seating position on the seat while driving, it is caught because the seat surface is not flat, but it is not so much that it interferes with driving, but in my case it spoils the fun of driving, so the normal seat was sufficient.
Other items that would be helpful
The deciding factor in the purchase
As mentioned above, it was already installed when the vehicle was purchased and was delivered as is.
I found out the price of the product from Webike. High! I thought.
[How is it used?
We use it for mountain play and Flat forest walks.
【Included Parts:presence or absence】.
It was attached to a used car, so I don't know much about it, but it looks like SeatBody only.
[ITEMS TO BUY TOGETHER
Not particularly
Opinions and requests to Manufacturer.
I think it is wonderful that there is a wide variety of lineups to meet various needs.
View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M
Too slippery.
Crf250rally50, thank you md44 for your help, I also purchased it for the proper Position
The material of the outer skin is rough non-slip fabric that sticks to the pants like magic tape, so I can't slide my butt on it.
Regular Seat fabric would have been even better.
I have applied Silicon spray as much as I want to help my butt slide, but it still gets stuck.
It is better to replace only the Seat cover.
I like the Seat shape.
View detail
One month of use
After reading other people's impressions, I put a Garbage bag under the Seat and stapled it to the Stapler, hoping for a waterproof effect. I put a Garbage bag under the Seat and stapled it to the Stapler. (Lol) But is it necessary to do that in the first place....I didn't do this before when I used FX's Seat, so I don't know. I guess it depends on your preference, since it doesn't change the seating comfort that much when it gets saggy. View detail
Patience and energy
I am sure it would be a snap to take it out to a store and have it replaced. But they are expensive and people want to do it on the cheap... The product is great. The quality is excellent; it feels like a Yamaha type off car Seat. In fact, this is the second time in my lifetime that I have replaced my Seat with this kind of Seat, and I think that I should change it even for touring purposes because Honda OEM Seats are always slippery. Now, as for the replacement, even an amateur can do it. Without a doubt. However, if you have patience and energy...you can do it if you have a 300 yen Tucker tool from Daso and a Mxx needle. However, it is hard to pull the needle and hit the needle again and again.... View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CRF250 RALLY
Structural difficulties?
Here are my impressions after riding 1000km.
It was good point
The seat height has been raised by about 20mm as I expected, which makes positioning easier, and the anti-slip surface on the seat is stronger than expected, which reduces fatigue in the hips and back.
Bad point
There is a gap of about 1cm between the Motorcycle and Seat edge, and the Seat appears to be floating.
Also, the screw holes were so gapped that they could not be seen and needed to be adjusted. (I didn't see this in any other reviews, so maybe mine was just ha-gap.)
View detail
Bolt mounting holes do not line up at all
I installed this on a 97 KLX250ES. Anyway, the Bolt mounting holes are off by about 1 cm.
We managed to force it to stop by pushing it with our force, but it was not good for Seat or Bolt, so we widened the hole a little.
The OEM Seat is also very slippery and surprisingly good, but the distance from the footpeg is too close and my knees are cramped, and it is difficult to operate the brake pedal. It was a good decision to choose Spiral High seat.
View detail
Good functionality, but difficult to install.
No functional problems. Design as expected.
However, the mounting holes, etc. seem to be misaligned.
Is it really for KLX250? I was so skeptical that I was forced to install it.
Is it an individual problem?
The mounting bolt might break someday. Therefore, the quality is 2*.
Otherwise, I'm happy with it
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CRF250 RALLY
For Touring
I purchased this for my CRF250M that I use for commuting and touring.
Originally, I installed a Gel Zab and Positive drive on top of the Normal seat to reduce the load when riding for a long time. The first Gel Zab was not very effective, so I immediately replaced it with Positive drive, and it became a little easier to ride.
After all. You might as well change the whole Seat." and went to Complete high seat.
The Seat surface is a little wider and the Seat height is higher than NORMAL, but the footing did not change since the Seat was originally ridden with Gel Zab and other equipment installed on top of the Seat.
After riding it for a while, my impression is that Very good." It is
Seat is less slippery. (Grip.) I think people have different tastes in terms of points.
View detail
Nice, better than the original seat
Its goodlooking and very good quality. The fitment is perfect on my honda 250m. iS HIGHERLY recomended for all this honda model View detail
Mounting on WR 250X
If you try to sit in a good position, you will feel like you are sitting on a step, so a regular high seat is recommended.
During installation, it was necessary to hold it down from above and tighten the Bolt.
View detail
I bought the Normal seat because I felt it was getting worn out.
I have been wanting to replace my Normal seat because it feels worn out, my butt hurts when I commute to work, and I frequently go to forest roads, so I wanted the feel of riding with Style and Seat angle.
The seat is slimmer than the NORMAL seat, so it is a high seat, but you don't feel that it is much higher than the NORMAL seat. The handlebar has also been raised by 30mm.
I am looking forward to going to the woods.
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CRF250 RALLY
The anko might be cheesy.
I bought this to improve Position and change the look of my Motorcycle.
That was perfectly correct.
But the bean jam inside was normal, both good and bad.
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CRF250 RALLY
CRF250M footpegSeat installed
To be honest, I was worried about the price until I decided to buy one. I was also worried about whether I should get the high seat or the footpeg seat. The reason why I decided to go with the footpeg seat is because the High seat has a shape that makes the seating position too far back, and also because it just doesn't look good after installation.
This is my impression when I installed it (I am 180m tall and weigh 75g). The seat height has been raised enough. My knees were bent and both feet were sticky, but now my knees are extended and my feet are floating a little more than sticky.
The riding position used to be a bit cramped, but thanks to the extended knees, this has been eliminated a bit.
I don't know how much the seat height is actually increased, but I personally think it became a good feeling. And unlike the Normal seat, the seat doesn't slide back and forth when accelerating or braking, so I can drive with a good feeling.
from now on [Spiral's Seat is hard. But I don't care that much about it. It's just a personal subjective feeling, so it's different for each individual, but I think it's just right for me.
Honestly, if you're worried about the price, I think you should buy it. No, I get it...you're paying 30,000 for a….
The satisfaction after installation is also high, and the custom look is increased when the Seat is replaced. You'll be noticed. I think. I think it is more effective than the fancy Stickers.
View detail
If you don't mind the hassle, it's a better deal than OEMOption's High seat.
[How is it used?
I use it for flat forest roads and city driving.
Was the one you received as per Image?
The seat fabric is thick and the surface bumps are large, so the grip is good and the product is more than Image.
Was the installation difficult?
To use the Base of Normal seat
1. Prepare the Normal seat.
Turn the seat over and remove all the balls of the Stapler that hold the Normal seat in place. Remove the fabric.
3. Remove the Normal seat Sponge from the seat base and replace it with the included Sponge.
4. Hang the supplied Vinyl over the Sponge and replace the Seat fabric.
If you are able to replace Seat, you can do it without any resistance.
If you have never done it before, please watch the video on YouTube etc. "I'll do it myself. Or "I'll leave it to you. Decide whether you want to do this.
How was your experience with it?
1. The seat surface is flat, which makes it easier to shift the weight when driving.
2. It is quite effective for those who have tight knees with Normal seat height.
3. Thick Sponge makes your hips and lower back more comfortable when driving long distances.
4. Seat thickness is increased, so the footing becomes worse.
[Included Parts:were they on?
Seat sponge, Seat fabric and thin Vinyl sheet are included in the package.
[Was there anything that disappointed you?
Not at all, the product exceeded my personal expectations.
0Other items that may be useful include
Point and hang of installation
The product is highly accurate, so if you are an experienced Seat repositioner, you will not have any problems, please refer to each video if you are not sure.
[With or without Instruction Manual
There was an illustrated paper in the box, but I think it's easier to understand if you watch the video.
[Easy to understand]
It changes the look and feel of the ride, it's a very straightforward and functional product.
[Notes]
As a matter of course, it worsens the footing.
If you don't feel any inconvenience with Normal seat, I don't think you have to change it.
[ITEMS TO BUY TOGETHER
There is nothing special about it because everything related to Seat except Seat base is included in the package.
[Opinions and requests to Manufacturer
I wish there were more color variations of the seat fabric so I could dress-up as well.
View detail
Installation review
The higher seat position makes driving easier Because it is softer than the original seat, fatigue is less accumulated even on long-distance driving. View detail
I'm glad I bought it
I'm personally glad I bought it because the Seat's anko is quite thick and my butt is hardly sore and the balance between the body and Seat is good.
It's just a bit of a pain to install.
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CRF250 RALLY
This Seat is for Off-roadMOTARD!
We are the inimitable MotocrossMOTARDFreak.
I've installed Spiral's High seat in all of the vehicles I've owned of that type, so there's no doubt about the performance anymore!
The fit is not right for some reason only for 2012 crf250l.
Well, I didn't mind too much because I'm performance oriented.
View detail
Off-road, High seat is basic if you want to MOTARD!
Spiral's High seat is the basic Items that no longer needs any explanation.
If you don't set it to High seat, you can't ride normally, just like turning the cell by twisting the key.
Spiral's seat has a good cover sewing, the fabric is also anti-slip, and the urethane foam has a moderate hardness, so it does not get tired even if it is a hard game for a long distance or a long time.
Fitting is very good, I've fitted it to my xr250, wr250x, wr250r, and crf250l!
Re-SaleValue is also high when selling a vehicle, so you can ride with the best Seat while owning a Motorcycle for almost free!
View detail
Fits: YAMAHA YZ250, YAMAHA YZ125X, YAMAHA YZ125, YAMAHA YZ250X
The best Grip!
Great butt hooking!
It's a lazy wadachi climb, so you can rest your arms.
It all leads to the Traction of the Rear tire ??
Recommendation
View detail