Reviews
It's a shame
I am disappointed that the cut around the product was too rough for the time it took to deliver. I quit wearing it because it was so messy. I will never buy from here again. View detail
Exhaust Cover Dry Carbon
It is impossible to install anything but a Normal muffler.
I asked the Motorcycle shop, but they said it is not a Level that can be processed.
Can I bite the spacer and float the large size? It is said that the appearance is sacrificed.
I heard that even if you shave the body and change the position of the holes, you can make the body about half as small.
AKRAPOVIC product S-K10SO28-ASZTBLSlip-on Silencer is
Exhaust pipe part is too thick, they say it hits too hard.
AKRAPOVIC products are not unusually thick.
I can't conclude that anything other than Normal muffler will do.
View detail
Fits: DUCATI MULTISTRADA 1100/S 2007-2009, DUCATI MONSTER1000 2000-2005, DUCATI MONSTER900 2000-2005, DUCATI MONSTER S4/S4R 2001-2006, DUCATI MONSTER S2R1000 2006-2008, DUCATI ST4/S/ABS 2004-2006, DUCATI MULTISTRADA 1000DSDS/1000s DS 2004-2006, DUCATI ST3/S/ABS 2003-2007, DUCATI SS900 1998-2006, DUCATI SS1000 1998-2006, DUCATI SPORT1000 2006-2009, DUCATI PaulSmart1000LE 2006, DUCATI 998/S/R/BIPOST 1999-2003, DUCATI GT1000 2006-2010, DUCATI 996/S/R/BIPOST 1999-2003, DUCATI 750SS 1999-2002, DUCATI 748 1999-2002, APRILIA DORSODURO 1200 2011-2016, APRILIA RSVMille/R 1999-2003, APRILIA SL1000 FALCO 2000-2004
Clutch lever is incompatible in any way.
Brake lever can be pontooned. It is a simple job. Even an amateur can replace it in less than 10 minutes if he does not do anything unnecessary.
However, clutch levers cannot be used in any way because they have a different structure to begin with.
However, when you look at the image in the Single Item's Clutch lever list, you can actually see the TUONO1000. (2003) The Foldable ventilation lever that may be attached to the clutch lever of the
https://www.webike.net/sd/20328109/
https://www.webike.net/sd/23331923/
It is about the same.
As for quality and texture, if you halve the price and consider each lever unit, I think the Brake lever is satisfactory enough. However, considering that the clutch lever is not available, I would be tempted to use a lever such as CRC if I consider the entire price for the brake lever....
View detail
Fits: HONDA CBR600F, HONDA CB600F
I received something different from the Spec. but they would not accept the exchange.
I am very satisfied with the quality and construction of the product.
We are also impressed by the attention to detail in the product packaging and the quality of education of the headquarters customers.
The time lag between the return of the defective item and resending it was also the smallest, and the curing was excellent.
Of course, the return shipping costs were borne by the manufacturer.
So why was a return necessary?
It was a slow Response on the part of WeBig, and a failure to admit fault in the management of the goods in the first place.
Also, to return it. You pay for shipping." I also have to close my mouth at the attitude of "I'm not a good person.
The product in question is a dedicated part number that fits PC41, but the Quantity:Pair (for Left and Right) I received a product that was different from both of the above.
Originally, the part number of the Brake lever was [F-18] The one that is 《F-25》 and the one that is 《F-25》 is
Also in Clutch lever [H607] The reason is that what should have been a "K-25" was a "K-25," and so on, which is a completely different thing.
It is clear that the check is not made at the time of delivery from Manufacturer or at the inventory stage, and that it is not made at the time of delivery from Manufacturer or at the inventory stage.
Even though we did not check the packing before shipping, the fault lies solely with the manufacturer.
I bought it from WeBig, not from Manufacturer direct, right?
Shouldn't the responsibility for selling something different from the hanging complaint first be borne by the dealer?
Although my satisfaction with the product is close to a perfect score, my overall rating is 1 star. (The lack of a Minus indicator is frustrating.)
View detail
Fits: KAWASAKI NINJA400, KAWASAKI Z250, KAWASAKI NINJA250
Noise.
When I drive it, it rattles with a slight Gap. There is no interference or hitting anywhere, so it seems to be the Fender itself.
It is noisy and uncomfortable.
View detail
One nail was broken. It is unfortunate.
When I tried to take it out of the bag after receiving it, one of the nails was sticking out of the urethane sheet it was wrapped in, pointing in a strange direction.
I removed the Seat with a bad feeling and …
The broken nail came with it popping out of the Seat hole.
This was common in the days of SSK, and remained so even after the company name change to Speedra.
The carbon eyes are nice and neat, but the reverse side invisible is a mess.
I think nails are a part of the body that should be strengthened, as they are easily broken even with normal use…
I think I will receive the same one again even if I ask for a replacement, so I will Repair it and use it.
View detail
Too bad! That sucks!
I was going to use carbon to give it a high quality look and custom look, but I was shocked at how bad the product was.
The mounting holes must be widened and positioned.
Even if the mounting holes are machined, the screw cannot be inserted because the 1 pc position gap is inevitable. The hole position has a gap of about 2cm.
I've been looking at Impressions, but it's so bad that it's a big surprise.
I'm trying to figure out what to do with the 1 pc Screw.
View detail
Fits: KAWASAKI NINJA H2, KAWASAKI NINJA250, KAWASAKI NINJA400, KAWASAKI Z250, KAWASAKI ZX-25R, KAWASAKI Z400, KAWASAKI ZX-10R
idiot
NinjaH2footpeg, for Rider I bought it, but it doesn't fit, it doesn't fit.
My H2SXSE+ is a '20. The fitment chart says 15-21.
The box is a little torn, so I may not be able to return it.
Check the fit, you idiot. Die.
$9,000- wasted.
View detail
It interferes with License Plate Cover.
I have no problem with the quality or Design.
Inner panel can also be installed.
It's safe
Just to License PlateFrame.
If the Type has a frame, the hole position may interfere with the
Please be careful, it will not fit.
DAYTONA with Reflector
The License Frame has a Bracket for License Plate Light.
Cannot be installed due to interference.
Parts has tried everything, but this is the result.
It's the first time I've become one, though, so I learned a lot.
If the Manufacturer is pre-defined in the product description
License Frame cannot be installed.
I think it should be stated.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Not compatible with 21 year old Hayabusa.
I have contacted Webig before, but the '21 hayabusa does not fit due to the different bolt diameter.
Please correct the fitment description.
View detail
Fits: HONDA CB400SB VTEC Revo, HONDA CB400SF VTEC Revo, HONDA CB400SF VTEC, HONDA CBR900RR, HONDA CBR600F2/F3/F4/F4i PC25/PC35, HONDA CBR400R NC23, HONDA CB400SB VTCE REVO, HONDA CB400SF VTCE REVO, HONDA CB400SF NC31, HONDA CB400FOUR NC36, HONDA Rebel300, HONDA REBEL500 PC60, HONDA REBEL250 MC49, HONDA MAGNA750 RC43, HONDA HORNET900, HONDA HORNET600, HONDA STEED600, HONDA HORNET250, HONDA STEED400, HONDA SHADOW750
wrong way of shipping
I ordered Black, but I got Titanium... View detail
impossible to install
The z900RS Radiator Side Cover is not compatible with the 21 year old, but it is not listed. View detail
z900RS 2021 not installable, not shown in the description.
Radiator cannot be installed from 2021 due to change.
Not even mentioned in the product description.
Pre-pay for returns and exchanges, the worst!
I will not buy from Webig.
No phone support, so the response is too slow.
View detail
Material to the claws:Carbon...
Even the claws are made of carbon, and they are not flexible enough to fit in the air box, and the accuracy is not good.
Also, since it is only hardened with resin around another Parts, it will break if it is drilled from the root.
I am going to interview the claws of Normal parts and transplant them and use them, but I want you to select and manufacture the parts according to the necessity, not to make the form of Normal as it is with Carbon. (e.g. SpringGold is stretched and held in place with resin)
It's a shame because the quality of Carbon itself is good.
View detail
Fits: KAWASAKI NINJA1000, KAWASAKI NINJA1000SX, KAWASAKI Z H2, KAWASAKI ZX-14R, KAWASAKI ZX-6R, KAWASAKI 1400GTR, KAWASAKI ER-6F, KAWASAKI ER-6N, KAWASAKI NINJA400R, KAWASAKI NINJA650R, KAWASAKI Versys, KAWASAKI Versys1000, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI Z800, KAWASAKI ZR-7, KAWASAKI ZR-7S, KAWASAKI ZRX, KAWASAKI ZRX-II, KAWASAKI ZRX1100
Speedra Aluminum Footpeg
It is Z1000 14 years old, but it did not attach though I bought it after confirming the fitment chart. It's a pity because the product was good. View detail
Fits: KAWASAKI NINJA400 (2014-), KAWASAKI NINJA2 Helmet50RSL, KAWASAKI NINJA250R, KAWASAKI Ninja 650, KAWASAKI ZX-25R
It cannot be installed
Unfortunately, I couldn't install it on my Ninja ZX25R because the position of the bolt hole is gap. Just in case Mine. He added.
Once I had a replacement that was inspected and confirmed by the Manufacturer under the fitment warranty, unfortunately there was a gap in the Bolt hole and the Bolt bit the hole in the Mirahole Cover and could not be tightened to the end.
View detail
Fits: SUZUKI TL1000R, SUZUKI SV1000S, SUZUKI SV1000, SUZUKI GSX1400, SUZUKI GSX1300R Hayabusa, SUZUKI BANDIT650(GSF650), SUZUKI BANDIT650S(GSF650S), SUZUKI BANDIT1250S, SUZUKI BANDIT1250F, SUZUKI BANDIT1250, SUZUKI BANDIT1200, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM1000, SUZUKI GS1200SS
Short in length, but...
The length is shorter than the OEM, but the beginning of the bend is on the outside, so when you actually put it on and hold it, it starts to bend around your middle or ring finger. It's hard to grip, and the quantity of the index and middle finger:It was a useless substitute for my 2pc grip because I couldn't use my index finger. View detail
Fits: BMW F800R, BMW HP4, BMW S1000R, BMW S1000RR
The product does not fit 2020 s1000rr
I have to find and purchase the bolts because the bolts are not suitable for 2020 s1000rr. The product description in the web never says it is the suitable for 2020 s1000rr. This is a very very bad purchase experience View detail
Cannot be pontooned.
It is said that it is compatible with h2sx, but the Pin is included for the cantilever, and the Tire is removed and installed, but there is a possibility that the Tire will come off because the Pin is removed when running frequently in the Circuit etc., and the person who had it installed at the dealer actually said that the Tire almost came off and removed it. View detail
Fits: HONDA CB1300SF, HONDA VFR800, HONDA ST1300A, HONDA ST1300, HONDA CBR1100XX
I will never use this Shop again!
I've been contacted many times to return an item immediately after it arrives but I haven't heard anything back? I think this is the worst Shop. I will never shop there again! View detail