Reviews
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CB1000R, YAMAHA YZF-R1, YAMAHA MT-10, YAMAHA YZF-R6, YAMAHA MT-09, YAMAHA MT-09 TRACER, YAMAHA XSR900, YAMAHA TRACER900, YAMAHA MT-07, YAMAHA XSR700, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA MT-03, SUZUKI GSX-R1000, SUZUKI V-STROM250, SUZUKI GSX-R600, SUZUKI GSX-R750
Exchange with Front in matching color
The Rear is not a very visible place, but since the Front was replaced, the Rear was also replaced.
I am satisfied with the sense of luxury, even if it is not noticeable.
View detail
Very nice!
When installing a new one, the installation stick etc. will need to be purchased separately.
For OEM Product replacement, only this product is required
View detail
Fits: KAWASAKI Z250, KAWASAKI NINJA400, KAWASAKI NINJA250
This was good.
The company's Long Type was PeLePera and made a strange noise that made it unusable, but this was good.
The position of the Screw hole does not require any correction, and the Center is also out. There is no lack of strength in the product. There were some unevenness in thickness, but it was nothing to be concerned about.
It is a good product for those who are not dissatisfied with OEM Shape.
View detail
High quality feel of Twill Weave Carbon!
The GSX-R1000R does not come standard with a rear inner fender.
Therefore, after driving in the rain or in puddles, the area around the swing arm and rear suspension will become dirty with mud and other large discoloration.
I bought it because I have to do something about it because I get rained on almost 100% of the time when I go touring.
First of all, the product is packaged in a Large Kinadana Ball to prevent damage.
Included Parts:is carefully divided into Instruction Manual, Mounting Bolt, Bracket, Collar, Key Holder, and Stickerx2.
I chose the Twill Weave Carbon glossy and was pleased with the quality of the product, which is better than I expected. I am especially pleased with [Color] The gloss of Clear is wonderful. Also, the part of the reverse side that comes in contact with the swing arm has a cushion attached to it, which is also a nice attention to detail.
If the installation is done according to the Instruction Manual, which is easy to understand, there will be no problem. On the other hand, if you try to do it in a different way from the Instruction Manual, it will take more time.
The Fender is a type that is placed on top of the Swing Arm or Chain Guard, so it is quite large and a little wide, so it is easy to work with it after temporarily fastening the Bolt on the Right Side Bracket. It is easier to work after temporarily fastening the bolt of the Right Side Bracket.
The long type in the manufacturer's photo makes it look long, but in reality, it does not bother me at all. Thanks to this length, the effect of the mud shield is improved.
View detail
Fits: YAMAHA XSR900, YAMAHA XSR700, YAMAHA TMAX560/TECH MAX, YAMAHA TMAX530, YAMAHA MT-10, YAMAHA MT-09 Tracer, YAMAHA MT-09SP, YAMAHA MT-09, YAMAHA MT-07, YAMAHA FZ8, YAMAHA FZ8 FAZER, YAMAHA FZ6, YAMAHA FZ6 FAZER, YAMAHA FZ1, YAMAHA FZ1 FAZER, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT-25/MT-03
Tandem Footpeg Installation
Replacement from OEM is not difficult.
And I'm happy with the texture!
Motorcycle is now Black and much tighter.
The Plate is where I installed it and got lost and locks for storing footpeg.
As long as you remember that when you remove it, there is no problem.
Can be installed without special modification.
View detail
Fits: HONDA CBR1000RR, KAWASAKI NINJA1000, KAWASAKI VERSYS1000SE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI ZX-14R, KAWASAKI ZX-6R, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R750, YAMAHA YZF-R1, YAMAHA YZF-R6, BMW S1000RR, HONDA CB1000R, HONDA CB1300SF, HONDA CB400SF Revo, HONDA CBR600RR, KAWASAKI NINJA250R, KAWASAKI Z1000, KAWASAKI Z750
Titaniumium color fine
It's just a matter of removing the existing lid and replacing it, but I like it because it looks more luxurious than the NORMAL Plastic. View detail
And don't worry about accuracy!
I think the texture and manufacturing is totally good.
I just wish the color of the Mesh part was Black.
Or you can choose to do so.
But I have no regrets at all.
View detail
Fits: KAWASAKI ER-4n, KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI NINJA250R, KAWASAKI NINJA400R, KAWASAKI NINJA650, KAWASAKI NINJA650R, KAWASAKI VERSYS1000, KAWASAKI Z400, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI Z800, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZX-10R, KAWASAKI ZX-12R, KAWASAKI ZX-14R
PetitCustom.
Was the one you received as per Image?
Yes, it was as per Image.
Was the installation difficult?
Installation is easy. It took a bit of time because the Bolt removing the part to be replaced was rusted, but…
How was your experience with it?
I think it was good to see the change in appearance.
View detail
Fits: KAWASAKI ER-4n, KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI NINJA250R, KAWASAKI NINJA400R, KAWASAKI NINJA650, KAWASAKI NINJA650R, KAWASAKI VERSYS1000, KAWASAKI Z400, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI Z800, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZX-10R, KAWASAKI ZX-12R, KAWASAKI ZX-14R
Since theOriginal has rusted out.
I was going to repaint the Original, but saw it on the web and bought it because it looked good.
The ZX600P was just fine as it was just a matter of attaching the Locktite as is.
View detail
I think about it a lot.
[How is it used?
The shape of the handlebar makes it impossible to attach a camera or cell phone holder, but this product makes it possible to attach a camera or cell phone holder.
Was the one you received as per Image?
I bought one about a year ago and was happy with it, so I bought it again.:Pair (for Left and Right) Mounting on
How was your experience with it?
Purchased this in addition to a previous purchase that I was happy with.
[Points to note]
The photo appears to be made of Gold, but in reality it is Material.:I was worried at first because it is Plastic, but I used it without any problem.
How did it compare to other products?
This product only
View detail
Fits: BMW R1200GS Adventure, BMW R1200GS, BMW R1200RS, BMW R1200R
good stuff
excellent workmanship.perfectly fit.motorcycle now look delicious.will buy more and more stuff.no regrets.shipping worldwide super fast View detail
Fits: SUZUKI SV1000S, SUZUKI GS1200SS, SUZUKI SV1000, SUZUKI GSX1400, SUZUKI BANDIT650S, SUZUKI BANDIT650, SUZUKI GSX1300R HAYABUSA, SUZUKI BANDIT1250S, SUZUKI BANDIT1250F, SUZUKI BANDIT1250, SUZUKI BANDIT1200, SUZUKI DL1000 V-STROM1000/DL1000, SUZUKI TL1000R
Clutch becomes lighter.
I've been curious about Lever for a while.
I have short fingers, and even when I adjusted it to the most front, it felt a little far away.
Perhaps that's why the Clutch felt so heavy, and the Brake felt tired in my hands when I had to attack mountain passes.
I was troubled by the fact that the popular external lever was rather expensive, and the cheap foreign products were said to be not accurate or usable, but I chose the expensive one rather than buy something cheap.
SSK Long Type.
The reason why I didn't choose Short is because I usually grip the end of the lever, and I wondered if the longer one would be lighter due to the lever principle. I thought, "Why not?
Less than 11,000 yen including COD.
I was a little worried about the year, but it was OK.
The Clutch Side was pretty close, compared to the closest position to each other.
Clutch master's shaft-threading parts are OEM parts.
I thought the brake side would be the same as the OEM side, but when I put it on, it was much closer, and when I put it at the very front, it came right up to the grip.
After temporary alignment and confirmation of fit, grease up and assemble.
The feel of the controls is definitely more comfortable for my fingers.
The result is Large Satisfaction
Clutch is now dramatically lighter.
I think he was lighter to begin with, but not at all.
It was only a light Shock to change so much with only Lever.
Recommended
View detail
Screen Poll.
I think it's nice! And it's a bit upscale. View detail
ZX-6RPetit lightweight
What made you decide to buy?
I was working hard to save up my WeBigPoints to get a Speedra Rear Fender, but it ran out of stock on the way, so I decided to get it next time. Delivery date:December. However, recently Recently, however In stock and the limited time Point was about to expire, so I decided to purchase it. It seems that once the stock runs out, it will take a long time for the next delivery. If you are an Owner who is thinking of purchasing, I recommend you to get it while it is still in stock.
How was your experience with it?
The material used for the rear fender is dry carbon, which is also used in aircraft, and is stronger and lighter than the OEM rear fender. Dry carbon is completely different from conventional wet carbon, which is produced using the latest carbon processing technology and boasts ultra-light weight and ultra-strength. This material is also used for Sue Parka and F1 etc.
this time Twill weave/glossy in the Instruction Manual. All of our dry carbon products are handmade and finished. Slight variations and errors may occur." The product was manufactured with the same level of detail and craftsmanship as the OEM product. The Bolt mounting holes fit perfectly, and I was able to install the Bolt without any modifications.:The weak point of Carbon products, UV rays…I wonder if all Speedra products are? The Rear Fender I purchased this time, both matte and glossy, are all UV cut processed, so I can use them with peace of mind.
[Others]
Speedra's Sticker and Material:A Carbon Key Holder was included.Material:The Carbon Key Holder is so high quality that it should be sold! In a way, only the person who purchased it can receive it, which gives it a special feeling and large satisfaction. I am now thinking about what to attach it to.
View detail
The fastening method is the usual screw fastener, so it is better than other manufacturers.
It was easy to install
The GSXR1000R does not have a Rear Fender, so it is necessary to prevent scratches. Also, the slightly longer length of the seat prevents dirt from sticking to the bottom of the seat.
I think you should buy this product.
View detail
Fits: HONDA CBR1000RR, KAWASAKI NINJA1000, KAWASAKI VERSYS1000SE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI ZX-14R, KAWASAKI ZX-6R, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R750, YAMAHA YZF-R1, YAMAHA YZF-R6, BMW S1000RR, HONDA CB1000R, HONDA CB1300SF, HONDA CB400SF Revo, HONDA CBR600RR, KAWASAKI NINJA250R, KAWASAKI Z1000, KAWASAKI Z750
Since both Bar End and Lever are Titanium, Cap is also Titanium
I bought Titaniumium color for Rear at Speedra, but the size is too large....
If you look closely, it was not for 6R after 2019 but for 6R before that.
I'd buy it if it was for Rear too...
I am a little disappointed because I wanted to match it with other exterior parts.
But for Front is perfect.
I'm satisfied
View detail
Fits: HONDA CBR1000RR, KAWASAKI NINJA1000, KAWASAKI VERSYS1000SE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI ZX-14R, KAWASAKI ZX-6R, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R750, YAMAHA YZF-R1, YAMAHA YZF-R6, BMW S1000RR, HONDA CB1000R, HONDA CB1300SF, HONDA CB400SF Revo, HONDA CBR600RR, KAWASAKI NINJA250R, KAWASAKI Z1000, KAWASAKI Z750
The colors are great! The texture is high.
This is one of the Custom unified with Speedra's Titaniumium color.
The texture is high and the color and luster are just like Image.
View detail
Fits: HONDA CB1100, HONDA CB1300SF, HONDA CB400SB, HONDA CB400SF, HONDA CBR1000RR, HONDA CBR250RR, HONDA CBR600RR, HONDA GOLDWING, HONDA INTEGRA, HONDA NC700S, HONDA NC700X, HONDA NC750S, HONDA NC750X, HONDA RC750X, HONDA VFR1200F, HONDA VFR800F, HONDA CB400SF, HONDA CBR1000RR, HONDA CBR1000RR, HONDA GOLDWING
Aluminum Bar End
I like it because it was easy to install and it is a one point accent. View detail
I tried to create a unified look with Speedra's Titanium.
I like the color, gloss and shape of Speedra's Titaniumium color.
Satisfied with the view.
It's good
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z250 (2013-), KAWASAKI Z750 (water-cooled), KAWASAKI Z750S (water-cooled), KAWASAKI ZX-14R, KAWASAKI NINJA2 Helmet50RR, KAWASAKI 1400GTR, KAWASAKI EX-4, KAWASAKI FX400R, KAWASAKI GPz1100, KAWASAKI GPZ400R, KAWASAKI GPZ400S, KAWASAKI GPZ900R, KAWASAKI VERSYS-X 250, KAWASAKI ZR-7/S, KAWASAKI ZR-7/S, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S
Speedra's Titaniumium color is a nice touch.
This is one of the Custom unified with Speedra's Titaniumium color.
The texture is high and the color and luster are just like Image.
View detail