Reviews
Drink holder
I am very satisfied with the way it is made.
It is very good because it can be easily adjusted according to the Drink Size.
View detail
Slight modifications were needed.
The twill weave and glossy finish gave it a Gorgeous atmosphere at once.
I will upload a picture of the installation, but there were some areas that were sized over OEM, so I had to do a lot of shaving in the file.
The part protruding from the masking tape is the Oversize part. I cut here and there other than in the picture, but the bolt holes were correct.
If you do not use the OEM product, you can see the overlay.
As is usual with dry carbon products, it would save time and effort when installing the product if it were shipped with a little more fine-tuning after completion of the product. However, even if this is not the case, Parenthesis has a quality that OEM products do not have.
View detail
Color Balance
I am glad that Accent chose Carbon as well as OEM Parts' Black for the Cafe after much deliberation. View detail
Large Scale
I installed it and drove around without any inconvenience or problems while driving. It is larger than I thought it would be, so if you are concerned about how it looks, I would not recommend it. I only put it on as insurance in case I fall off the bike, but if I didn't fall off, I wouldn't need it. View detail
Fits: KAWASAKI NINJA650, KAWASAKI NINJA400, KAWASAKI ZX-6R, KAWASAKI NINJA250SL, KAWASAKI NINJA250, KAWASAKI NINJA1000
Extra Material:CarbonKey Holder is a delight!
I also bought a Ninja 250SL to hide the scratches on the Mirror part…
It's honestly insanely expensive !!!! … but the texture is good.
I am happy with the bonus Sticker and Key Holder. Other companies should take a lesson from you! LOL!
View detail
Fits: KAWASAKI VULCAN S(VULCAN400), KAWASAKI VULCAN(VULCAN400), KAWASAKI VERSYS 650, KAWASAKI NINJA650, KAWASAKI Z900, KAWASAKI Z650, KAWASAKI VERSYS 1000, KAWASAKI ZX-25R
Inexpensive as a Foldable adjustable
I don't think I have a weak grip, but I have short fingers, so the OEM brake lever is a little too far away even if the adjustment range is recent.
The only thing to keep in mind when installing the clutch is to use the OEM collar for the clutch side.
Foldable lever, but it only collapses upward and does not automatically restore because there is no return spring built in
I wouldn't say it's a drastic change, but you can expect less finger fatigue when operating Lever frequently over long distances.
View detail
For One point around the Front
There are not many custom parts around Front.
It is one of the few self-satisfied Parts. I just hope it won't fall over and I'll be glad I put it on.
The quality and ease of installation are unquestionable.
View detail
Fits: HONDA CB1000R, HONDA CB1100, HONDA CB1300SF/SB, HONDA CB1300ST, HONDA CB250F, HONDA CB250R, HONDA CB400Four, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB750, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR250R, HONDA CBR400R, HONDA CBR600F, HONDA CBR600RR
good
The footpeg surface is knurl coated so it doesn't slide around. The only regret is that the GizaGiza at the end of the footpeg sometimes gets caught on clothes and motorcycle covers, making it difficult to remove them. View detail
Fits: HONDA CB250F, HONDA CBR1000S, KAWASAKI D tracker, KAWASAKI ER-4n, KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI KLX250, KAWASAKI Ninja 650, KAWASAKI Z1000 (water-cooled), KAWASAKI Z250SL, KAWASAKI Z650, KAWASAKI Z800, KAWASAKI ZXR750, KAWASAKI ZXR750R, KAWASAKI Versys 650, DUCATI 1199Panigale, HONDA CB1300 Super Four, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER BOL D'OR, HONDA GROM
More noticeable than expected.
It was easy to work with as all we had to do was remove the OEMCap and install it.
I am a little concerned about the fact that it is slightly smaller than OEM or that the white part is visible.
I like the Simple design but with a luxurious feel.
View detail
Fits: YAMAHA XSR900, YAMAHA XSR700, YAMAHA TMAX560/TECH MAX, YAMAHA TMAX530, YAMAHA MT-10, YAMAHA MT-09 Tracer, YAMAHA MT-09SP, YAMAHA MT-09, YAMAHA MT-07, YAMAHA FZ8, YAMAHA FZ8 FAZER, YAMAHA FZ6, YAMAHA FZ6 FAZER, YAMAHA FZ1, YAMAHA FZ1 FAZER, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT-25/MT-03
For Dress-up
Nice look and color, heavy and solid texture.
It's easy to install, so it's perfect for dress-up.
View detail
It takes a lot of force to fit them in.
Good appearance and texture.
I don't know if it takes hang to fit the product, but you have to put a lot of effort into it to get it to fit.
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
yzfr25 FuelLid Sticker
It was properly degreased with Silicon-off before applying.
Since the surrounding area is thin, it should be removed carefully when peeling it off from the backing paper.
View detail
Luxury UP♪
[How is it used?
I used to wear a CarbonTank cap made by DURABOLT Shoulder Bag, but it had yellow spots due to aging and the hinge was damaged by contact, so I changed it to this one made by SPEEDRA.
Was the one you received as per Image?
The carbon also has a realistic texture, and is indeed a product of a manufacturer that handles many carbon parts.
Was the installation difficult?
One Bolt hole part cracked when it was pulled for fine adjustment.
The Bolt area is thinner, so care should be taken.
How was your experience with it?
The DURABOLT Shoulder Bag I used to use had a connected hinge, which damaged the contact area, but this one has a broken hinge, which is good because the moving parts are less painful.
View detail
Fits: BMW R1200GS Adventure, BMW R1200GS, BMW R1250GS Adventure, BMW R1250GS, BMW R1250GS Adventure, BMW R1250GS
Better to have it than not to have it.
It requires more keys, but it is better to have them than not to have them. Installation is easy, but the Bolt is hard and requires a lot of force to remove the Tandem Footpeg. View detail
Fits: SUZUKI V-Strom 650XT, SUZUKI V-Strom 650, SUZUKI V-Strom 1000XT, SUZUKI Vstrom 1000, SUZUKI GSX-S750, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-R1000R, SUZUKI GSX-R1000
If only we had done this from the beginning.
At first, I attached a cheap Chinese one, but there was still a position gap near the bolt hole, and although I tried to accept that it could not be helped, I was not satisfied and replaced it.
The plain weave pattern, not the Kaabon twill weave pattern, is a bit ... but other than that, the accuracy is high and I am satisfied with no position Gap at all.
View detail
I love Speed La, but this time it's …
Most of the carbon parts I have used on my motorcycles have been Speedra products and I trust them very much.
However, for this NINJA Fender, the gap at the screw position is too large, so I had to shave it down quite a bit.
It was a hassle to fix the rear side with a nut stop.
However, I think it is a satisfactory product once it is attached.
View detail
Fits: SUZUKI V-Strom 650XT, SUZUKI V-Strom 650, SUZUKI V-Strom 1000XT, SUZUKI Vstrom 1000, SUZUKI GSX-S750, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-R1000R, SUZUKI GSX-R1000
Speedra Carbon Tank Cap Pad
The pad is a plump, three-dimensional pad with a good texture, and it is cool because it is always in a visible position, giving it a sense of presence and preventing scratches.
It was a little difficult to put the outermost one on.
I think the price is a little high….
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA YZF-R7
The World of Self-Satisfaction
I bought one for my R7 so I know what I'm getting, and it fits my black XSR900 perfectly. The installation was easy, so if you don't want to reuse the split pin, be prepared. View detail
Fits: KAWASAKI ZEPHYR400 χ, KAWASAKI W800, KAWASAKI ESTRELLA, KAWASAKI ESTRELLARS, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750 RS, KAWASAKI NINJA650R, KAWASAKI BALIUS, KAWASAKI BALIUS2, KAWASAKI VERSYS, SUZUKI GSX250FX , KAWASAKI Z750, KAWASAKI KLE400, KAWASAKI EX-4, KAWASAKI ER-6n, KAWASAKI ER-6f, KAWASAKI ZZR600, KAWASAKI ZZR400, KAWASAKI ZZR250
Repair Parts available.
I had it on in exchange for an OEM, but it broke when I was parked and fell.
I should have made it Foldable.
Repair Parts can be ordered from the Manufacturer's Home page.
I am satisfied with the look and feel of the product, with a choice of color combinations and good texture.
View detail
Fits: KAWASAKI NINJA H2, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI NINJA H2R, KAWASAKI ZX-10RR, KAWASAKI ZX-10R, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2 SX SE
good-looking
Before I knew it, the tank cap had scratches and small corrosion marks as if scratched with a key, which I noticed when I stopped at a traffic light and looked down.
We chose this one because it uses real Carbon Seat, not Carbon Style, if we were going to put it on.
It is surprisingly difficult to match the tank cap with the fixed bolt, but it looks good.
I degreased it thoroughly with Silicon-off, so it does not seem to peel off immediately.
View detail