Reviews
Sober Cool Products
I bought the twill weave matte finish. It is very easy to install, just take off the NORMAL one and replace it with the new one, which is a small one, so the replacement is not very noticeable and does not have any effect. It is a completely self-satisfying product, but that is what makes it so cool. View detail
Mounted on a Can-Tan, it is Cool!
I purchased the twill weave matte finish. It is easy to install, just remove the NORMAL parts and install them in the same way. For me, I am satisfied with the Large product. View detail
Fits: KAWASAKI ZX-9R, KAWASAKI ZZR1200, KAWASAKI ZZR1400, KAWASAKI ZX-6R, KAWASAKI Z750, KAWASAKI ZX-12R, KAWASAKI ZX-10R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1200 DAEG, KAWASAKI Z800, KAWASAKI Z750S, KAWASAKI Versys1000, KAWASAKI Versys, KAWASAKI ER-6F, KAWASAKI ER-6N, KAWASAKI 1400GTR, KAWASAKI 1400GTR, KAWASAKI ZX-6R, KAWASAKI NINJA400
Three! LOL!
Gold was used for the G-type, but since it was so new, we did not transplant it.
I decided to go with Black because of the delivery time, but as a result, the Rear area has been tightened up!
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI ZX-10R, KAWASAKI ZX-6R, KAWASAKI NINJA1000 (Z1000SX), BMW S1000RR, DUCATI , HONDA , KAWASAKI Z800, SUZUKI , TRIUMPH DAYTONA675, BMW S1000RR
The texture is elegant.
I bought it just for the looks.
The quality is good and I have no complaints.
View detail
The coloring is also good.
It's a bit pricey, but the Anodized color is great and it's one of the best products for hiding holes in Frames. View detail
Fits: KAWASAKI ZX-6R, KAWASAKI NINJA400, KAWASAKI NINJA650, KAWASAKI NINJA250SL, KAWASAKI NINJA1000, KAWASAKI NINJA250
It is a natural assertion without feeling like it is a Cover (can be installed on the '24 model).
I was thinking of replacing the Mirror with Other Brand Product sooner or later, but when I got on the car and saw the visibility and the difficulty of adjustment of Other Brand Product etc. in the Review, I thought OEM would be fine and decided to replace the Mirror with Other Color.:Unpainted resin parts are SPEEDRA's Carbon parts, and the '24 model has been installed with no problem, so I installed the Mirror cover as well.
The one we purchased has a twill weave glossy finish in combination with other parts.
I have an impression that the type of parts that are put on the OEM Mirror is like a cover for the car dress-up parts, and I thought that I would not install it if there was any discomfort after the temporary fitting, but the material is carbon and thin, and you can see it around the moving part of the Mirror at the base. However, the material is thin and you can see it when you look around the Mirror's movable part at the base of the body.
The fitting also has some areas where the OEM Mirror is not fully hidden, but there is no particular sense of discomfort, so it was installed as is.
Installation is as simple as degreasing the OEM Mirror, covering it, and securing it with double-sided tape, but be careful not to break the cover, as you must spread the area around the Mirror's movable part while inserting it.
When I looked at the product, there was a hole at the bottom, so I wondered what it was? I wondered what it was because I saw a hole in the bottom of the product. I wondered what it was, and then I realized that OEM Mirror also has a hole for drainage?
The holes are not perfectly aligned, but they are in a functional position, so I think fitting will not be a problem.
The appearance is glossy, but it is not so strong, and you can appeal Carbon casually.
If you can't give up OEM visibility but still want to be Fashionable, this is for you.
View detail
Appeal degree is high
Installed on a 2022 MT-09.
The OEMFender was short and I thought it was not good enough, so I replaced it with this part.
The glossy twill weave Type was selected. Although the replacement does not change the driving performance, the appearance is improved and the satisfaction is high.
It is also good to be able to choose 4Patterns, glossy or not, twill weave or plain weave, according to your preference.
Even beginners can work easily by simply removing the OEM-fixed screws and clips and returning them to the same fixed locations.
View detail
Fits: HONDA CB400SB, HONDA CB750, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB250F, HONDA CB400SB, HONDA CB400Four, HONDA CB400SB, HONDA CB250R, HONDA CB1000R, HONDA CB1300ST, HONDA CB1300SF/SB, HONDA CB1100, HONDA NC750X, HONDA NC750X, HONDA NC750S, HONDA NC750S, HONDA NC700X, HONDA NC700S
Rolling and realization, Damage reduction.
I stepped on an Oil leak in Corner and fell down slippery…...
I was worried about Damage to the vehicle.
The footpeg is shaved off the footpeg.
The important parts of the Frameetc. were intact.
Thank you. You saved my life. (T-T)
View detail
Small in size, but large in appearance (installed on a 24-year model)
When purchasing the ZX-6R 24th model, the company considered converting the plastic parts to carbon to improve the quality of the appearance.
After comparing images and videos with the 2011 model, we determined that it could be used for the 24th model and purchased it.
Since CR-1Coating was scheduled to be installed as part of the car delivery maintenance, we brought the car to Kawasaki Plaza to have it installed in its installed condition, and the installation was done without any modification.
There were some comments to Review about poor Fitting, but I have no problems with mine.
Although these are small parts, I think they have a lot of impact in terms of appearance.
View detail
Front fork of XR1200
As the Title says, it was installed on an XR1200 front fork.
I had originally installed the Kellerman Blinker, so I didn't have any problems. The quality is high, but still the price is as well….
But it is also highly satisfactory.
View detail
Lighter weight due to carbonization (can also be installed in 24-year model)
The 24 model ZX-6R has no major differences from the 23 model in terms of front face, meter changes, and compliance with gas emission regulations, and even when comparing videos and images, I felt that there were few changes in the others. I asked Kawasaki plaza to install the coating with the car delivered to me for maintenance.
As a result, they were able to install it without any modification.
NORMAL is made of Gold genus, so Material:Carbon will be used to reduce weight.
I thought it was well thought out with the heat shield tape attached to the reverse side of the product.
Fitting is good with no interference with Exhaust System or Cowl.
View detail
It can be installed on the '24 MODEL without any problem.
Required As I was switching to a '24 model ZX-6R, I was wondering if the exterior parts could be used for the '23 model, as far as the changes from the '23 model were concerned. I was convinced that they were the same in shape, so I went ahead and got them to have CR-1Coating installed, and asked Kawasaki Plaza to install them along with the vehicle maintenance.
As a result, they were able to install it without any modification.
The Swing Arm has a fixed part on the back, so it might be a bit odd if it's a DIY project.
View detail
Small parts, but looks like large parts (can be installed in 24 years model).
After comparing images and videos of the '24 and '23 MODELs, I wondered if it would be possible to divert it to the '24 MODEL as well. I asked Kawasaki plaza to install it along with the vehicle maintenance.
As a result, they were able to install it without any modification.
I was concerned because some reviews said the Fitting was not good, but the one I fitted seems to be fine.
Although these are small parts, they give a very different impression when installed.
View detail
It can be installed on the '24 MODEL without any problem.
As I was changing to a '24 model ZX-6R, I was wondering if I could use the same exterior parts as far as the changes from the '23 model were concerned. We compared the images and were convinced that they were the same in shape, so we went ahead and obtained the CR-1 Coating to have it installed and asked Kawasaki Plaza to install it along with the vehicle maintenance.
As a result, they were able to install it without any modification.
The cable is fixed without any problems.
If possible, I would like to see Long Type developed as well.
View detail
Fits: DUCATI 916, DUCATI ST2, DUCATI MONSTER400, DUCATI MONSTER900, DUCATI MONSTER750, DUCATI MONSTER600, DUCATI MONSTER620, DUCATI 900SS, DUCATI 748
Good vibes
It was installed without any problems.
The screw and lever mechanism is GOOD because you can adjust the grip to your liking.
View detail
I was waiting for the GSX1300R HAYABUSA22~ footpeg!
Since there was no footpeg that fits to my GSX1300R HAYABUSA, I painted the OEM footpeg in Gold!
I am satisfied with the look, texture and Large change.
View detail
Fits: KAWASAKI 1400GTR, KAWASAKI 1400GTR, KAWASAKI ER-6F, KAWASAKI ER-6N, KAWASAKI Versys, KAWASAKI Versys1000, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI Z800, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZX-10R, KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZX-9R, KAWASAKI ZZR1200, KAWASAKI ZZR1400, KAWASAKI ZX-14R, KAWASAKI NINJA H2 SX SE
It's not about looking good… hmm?
The OEM Tandem Footpeg is similar in shape to any other Motorcycle and is very crappy, so I replaced it with Speedra's Tandem Footpeg and wow! It makes you think "W! View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA 400X, HONDA CBR250R, HONDA CBR400R, HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M, HONDA CRF450L, HONDA CBR500R, HONDA MONKEY125, HONDA CB150R, HONDA CB300R, HONDA CB500X, HONDA ZOOMERX, HONDA DIO110, HONDA glom, HONDA CBR250RR, HONDA PCX125 JF28-1000001-1099999
Best Matches
It matches the color of the car body and looks like an OEM product. I am satisfied with the color match. I could install it without any modification, even though our Motorcycle is not listed in the list of applicable vehicle models. View detail
Fits: YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3
I was satisfied with the vibration suppression effect.
I was concerned about the vibration of the handlebar, so I bought it as a dress-up as well.
I used to feel that my hands were numb and it was hard to operate my smartphone while touring, but after installing the device, I felt a little numbness even after riding for half a day. After wearing it, I can ride for half a day with only a little numbness.
I really like the texture of the look and the non-monochromatic design.
However, I am a little concerned that the SPEEDRALogo is a little easy to get dirty. Since it is such a good product, I would have liked to have seen some detailing such as coating over the Logo.
Compared to other companies' products in terms of simple grams, some of them are heavier and less expensive, and I feel that they are slightly inferior in terms of cost performance, but I did not regret buying Items in terms of the sense of ownership and satisfaction I got from it.
View detail
Fits: HONDA VFR800, HONDA Rebel 250, HONDA Rebel 500, HONDA CBR400R, HONDA CBR650F, HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA 400X, HONDA CB1100, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB650F, HONDA CBR1000RR, HONDA NM4, HONDA GROM, HONDA CBR500R, HONDA CB500X, HONDA VFR800XCROSSRUNNER 125, HONDA CBR1000RR, HONDA CBR250RR(2017-)
Recommendation for those who care about the appearance.
I applied it on my CB400SB, and it is an excellent shape, and I was able to apply it beautifully without any difficulty, just keeping in mind to apply it carefully and slowly. I think the adhesive power of this capPad is weaker in winter than in summer. View detail