Reviews
Fits: BMW S1000RR, KAWASAKI NINJA H2SX , KAWASAKI NINJA H2SX SE, KAWASAKI NINJA H2SX SE+
Mount bar with a large range of motion
[How is it used?
USB charging, for mobile Holder installation
Was the one you received as per Image?
Exactly the same as the photo shown
Was the installation difficult?
The installation itself is not difficult, assuming that there is a hole in the CenterPost of the Top Bridge.
Also note the hole diameter.
By tightening the screw, the Ring expands in the CenterPost and is fixed in place.
It tries to move somewhat even when it is fully tightened. This is unfortunate. However, it is a playful part like BacCrash.
Screw Lock (medium strength) must be used for the screw part.
How was your experience with it?
Very stable and very easy to use due to the wide range of motion.
No vibration, etc. is produced.
Pipe thickness is also common, making it highly Universal.
It depends on what you are going to install, if you are going to install a portable Holder, USB power supply,
I think 100mm is too short.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
CenterPost holes are not well fixed.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Assist the unique Handlebar shape.
The unique handlebar shape made it impossible to install parts with Handle near the handle, but these parts saved the day.
I have been using it for 3 years already and have no problems, so I bought another one the other side.
View detail
There was no problem
[How is it used?
For Holder fixing
Was the one you received as per Image?
Street Image
Was the installation difficult?
It was easy.
How was your experience with it?
It was good
[Included Parts:were they on?
Mounting with Bolt
[Was there anything that disappointed you?
nothing special
View detail
I think about it a lot.
[How is it used?
The shape of the handlebar makes it impossible to attach a camera or cell phone holder, but this product makes it possible to attach a camera or cell phone holder.
Was the one you received as per Image?
I bought one about a year ago and was happy with it, so I bought it again.:Pair (for Left and Right) Mounting on
How was your experience with it?
Purchased this in addition to a previous purchase that I was happy with.
[Points to note]
The photo appears to be made of Gold, but in reality it is Material.:I was worried at first because it is Plastic, but I used it without any problem.
How did it compare to other products?
This product only
View detail
A little expensive, but satisfactory
[How is it used?
Purchased Quadlock Mount to work with Scooter.
Mount, QuadlockMount, and iPhone XS Max on my commute to work.
Was the one you received as per Image?
As per Image.
Was the installation difficult?
It is very easy to use, just put it on the Mirror mount.
How was your experience with it?
Mount is thick enough and strong enough.
Satisfied with the freedom to change angles.
The phone doesn't shake at all.
Black Anodized has been in use for 3 months and has not faded (maybe with lighter colors?).
[Included Parts:were they on?
All parts for installation are included.
[Was there anything that disappointed you?
None in particular
View detail
It is easy to install.
As the Title says, It is easy to install.
Simply insert into the stem shaft and tighten.
The parts themselves are very easy to assemble.
However, there are likely to be individual differences.
Even if the hex on the mount bar side is tightened quite a bit, it rattles a little.
Easy to install and assemble.
Recommended
View detail
Easy to install
It's easy to install, just remove the Stem Cover and install. I'll have to wait and see how it holds up. The bar is a little low, so you should be careful when you install the Smartphone Holder because it might hit the Shield when it is fully locked. View detail
Easy installation
It is easy to install and strong enough.
The color is a little lighter than Kawasaki green, but
OK because it's cosy!
View detail
For Navigation installation
I bought this for Navigation installation. I used PartsRemover for Plastic model. View detail
Fits: KAWASAKI NINJA650, KAWASAKI NINJA1000, KAWASAKI GTR1400
NINJA650
I was able to install it on my NINJA650. View detail
Fits: KAWASAKI NINJA650, KAWASAKI NINJA1000, KAWASAKI GTR1400
Navigation installation
I bought this to install a used GORILLANavigation.
It is long enough and does not interfere with the Meter's visibility.
Best
View detail
Fits: BMW S1000RR, KAWASAKI NINJA H2SX , KAWASAKI NINJA H2SX SE, KAWASAKI NINJA H2SX SE+
unrestricted
I could position the SMART phone to my liking. View detail
Fits: BMW S1000RR, KAWASAKI NINJA H2SX , KAWASAKI NINJA H2SX SE, KAWASAKI NINJA H2SX SE+
unrestricted
Setting can be decided in all directions View detail
Not available
Maybe it's because the OEM and Bolt materials are different
It felt like a bite in the middle
No more torquing
There's a chance it won't come off again
I gave up on it because it is there
Individual differences?
Screw Pitch and members fit
I think there is..
View detail
Price suitable for luxury. However, Rubber will come off.
A little expensive Smartphone Holder.
Appearance and texture are Material : It is very good as it is Aluminum. I think the color is also beautiful.
Size of my smartphone (Lateral direction) When loosening Small Nut of Reverse side to fix it, it fixes it again, but it was a little troublesome. (In other products it is mainstream that the part that gets hooked is expanded by pushing Button. Well just fix it once)
When you always fix it, loosen the large Screw in the back by hand, fix it in the vertical direction Free, then fix it. This may also feel a bit more troublesome than pressing, pushing a little button of another company's product.
And it may be only for myself, but the White Rubber in the part that fixes under the Right of the smartphone has peeled apart. I think I will reattach it with glue, but I could not deny the feeling of making sweet a bit.
View detail
Fits: KAWASAKI NINJA1000, KAWASAKI NINJA650, KAWASAKI GTR1400
Large fancy goods and easy to use
This Multi Mount Bar has a longer length than the products of other companies and it has a portable Holder, two platforms for ActionCamera platform etc etc etc etc. Because it is a commodity that can be used for various purposes.
Also, there are various colors and I think that if you buy according to the color of Motorcycle you can use it for Fashion.
View detail
There is no worry of falling
There is no worry of cracking like resin with Aluminum Material.
Although it is not difficult with regard to installation, even if you tighten Bolt considerably with Spacer rubber in it, Firmly is not fixed and I used Double-sided Tape.
Since rotation is done only up to about 45 °, it is impossible to change the length and breadth.
There is no worry that smartphones will fall when using OutCamera can be used Charge Cable can also be used normally.
The price is high ...
It might be a reasonable price though thinking of breaking resinous and replacing it, but it is expensive.
View detail