Reviews
Fits: HONDA VFR800, HONDA Rebel 250, HONDA Rebel 500, HONDA CBR400R, HONDA CBR650F, HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA 400X, HONDA CB1100, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB650F, HONDA CBR1000RR, HONDA NM4, HONDA GROM, HONDA CBR500R, HONDA CB500X, HONDA VFR800XCROSSRUNNER 125, HONDA CBR1000RR, HONDA CBR250RR(2017-)
Can be installed on the 2023 CB1300SF
The system is designed to attach all of the multiple carbon parts at once, and the peel-off paper (Transparent) The parts will stick to each other as soon as you peel off the "P". It is not recommended to work outdoors when the wind is blowing.
In the end, I gently peeled off each part and attached it while positioning it. The level of the sticking feeling is so-so.
View detail
Fits: HONDA VFR800, HONDA Rebel 250, HONDA Rebel 500, HONDA CBR400R, HONDA CBR650F, HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA 400X, HONDA CB1100, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB650F, HONDA CBR1000RR, HONDA NM4, HONDA GROM, HONDA CBR500R, HONDA CB500X, HONDA VFR800XCROSSRUNNER 125, HONDA CBR1000RR, HONDA CBR250RR(2017-)
Carbon Wind
I am happy with the tightened look.
The work is also easy, just paste it on.
It would be better if it were cheaper.
View detail
The quality is very good.
SPEEDRA:This is the first time I have purchased Carbon parts from Speedra.
I wasn't sure about the quality of the parts, but I wanted them as soon as possible, so I made the decision to purchase them in stock.
When we actually saw the product, we found it to be very solid Carbon and the Bolt position could be installed with almost no modification.
I purchased only the Top cover this time, but it would be better to purchase the Side cover as well to improve the balance of the appearance.
https://www.webike.net/sd/24196595/
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S1000F
Scratch prevention!
I put it on to prevent scratches!
Carbon is beautiful, and it looks perfect!
The fitting was good, but around summer some of the adhesion floated or popped in some areas.
No problem using it!
View detail
Fits: KAWASAKI ZX-10R
SPEEDRA Tank side coverDry carbon Quantity:Pair (for Left and Right)
I put up Ninja's Sticker.
SPEEDRA Speedra SSK (SSK) Tank Side Cover Dry Carbon Quantity:Pair (for Left and Right)
Surprisingly, I've used the products here several times.
I think it's the most sane.
There are many products from other well-known companies that can be cracked just by banking.
Coco's products have never cracked, and they are very accurate and have very little BALI.
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
yzfr25 FuelLid Sticker
It was properly degreased with Silicon-off before applying.
Since the surrounding area is thin, it should be removed carefully when peeling it off from the backing paper.
View detail
Luxury UP♪
[How is it used?
I used to wear a CarbonTank cap made by DURABOLT Shoulder Bag, but it had yellow spots due to aging and the hinge was damaged by contact, so I changed it to this one made by SPEEDRA.
Was the one you received as per Image?
The carbon also has a realistic texture, and is indeed a product of a manufacturer that handles many carbon parts.
Was the installation difficult?
One Bolt hole part cracked when it was pulled for fine adjustment.
The Bolt area is thinner, so care should be taken.
How was your experience with it?
The DURABOLT Shoulder Bag I used to use had a connected hinge, which damaged the contact area, but this one has a broken hinge, which is good because the moving parts are less painful.
View detail
Fits: SUZUKI V-Strom 650XT, SUZUKI V-Strom 650, SUZUKI V-Strom 1000XT, SUZUKI Vstrom 1000, SUZUKI GSX-S750, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-R1000R, SUZUKI GSX-R1000
If only we had done this from the beginning.
At first, I attached a cheap Chinese one, but there was still a position gap near the bolt hole, and although I tried to accept that it could not be helped, I was not satisfied and replaced it.
The plain weave pattern, not the Kaabon twill weave pattern, is a bit ... but other than that, the accuracy is high and I am satisfied with no position Gap at all.
View detail
Fits: SUZUKI V-Strom 650XT, SUZUKI V-Strom 650, SUZUKI V-Strom 1000XT, SUZUKI Vstrom 1000, SUZUKI GSX-S750, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-R1000R, SUZUKI GSX-R1000
Speedra Carbon Tank Cap Pad
The pad is a plump, three-dimensional pad with a good texture, and it is cool because it is always in a visible position, giving it a sense of presence and preventing scratches.
It was a little difficult to put the outermost one on.
I think the price is a little high….
View detail
Fits: KAWASAKI NINJA H2, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI NINJA H2R, KAWASAKI ZX-10RR, KAWASAKI ZX-10R, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2 SX SE
good-looking
Before I knew it, the tank cap had scratches and small corrosion marks as if scratched with a key, which I noticed when I stopped at a traffic light and looked down.
We chose this one because it uses real Carbon Seat, not Carbon Style, if we were going to put it on.
It is surprisingly difficult to match the tank cap with the fixed bolt, but it looks good.
I degreased it thoroughly with Silicon-off, so it does not seem to peel off immediately.
View detail
Fits: BMW S1000RR, BMW R1200GS ADV, BMW R1200GS, BMW HP2 Sport, BMW F800ST, BMW F800S, BMW F650GS, BMW F800R, BMW F800GS, BMW F800R, BMW F800GS
BMW s1000rr, fits perfectly in 2018!
I was worried about whether it would fit my 2018 s1000rr, so I inquired about it and it seemed to be compatible, so I bought it. (The response was also very fast.)
I don't know about durability yet, but it looks OK!
Be careful when applying the thin part of Seal! It may be difficult to reapply.
View detail
good job
It was clean, no distortion, and fitted well.
Z400 is not listed in the compatibility list, but both Z and NINJA have the same tank, so it can be attached without any problem.
High seat is not a problem.
View detail
Fits: SUZUKI V-Strom 650XT, SUZUKI V-Strom 650, SUZUKI V-Strom 1000XT, SUZUKI Vstrom 1000, SUZUKI GSX-S750, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-R1000R, SUZUKI GSX-R1000
Self satisfaction Parts
Just degrease and apply.
It is completely self-sufficientParts.
Maybe if it were a little cheaper, it would be easier to get a hold of?
View detail
It has tightened up.
When waiting at a traffic light, you can see it well from you and be satisfied with its appearance. It is something you don't have to have, but you will increase your Tension without even knowing it. View detail
The texture is as good as it gets.
Installed on a GSX-R1000R 2019
This is Tank Pad of Dry carbon.
This is the first time I bought this kind of Tank Pad, but the Center part is floppy.
It's hard to say if it's not good along or if I messed up the positioning/attaching.
You should think that pasting is basically a one-shot deal.
The position is decided by applying it to Tank.
? Mark the decided position with masking tape etc.
? put up (tent)
The procedure is as follows.
One thing to note is that the GSX-R1000 in particular (2017-) It is necessary to take care of the one for the traction pad.
We use the Traction pad of Stomp Grip, but because it overlaps with this product firmly, we peeled off the Traction pad once, cut the overlapping part, and reapplied it.
If you have already applied the Traction pad, you will need to consider reattaching it as described above.
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
Cospa is good
I think the costa is good. The stain protection is not bad. I recommend it. View detail
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R, KAWASAKI Ninja H2, KAWASAKI Ninja H2R
Increased the sense of luxury in the front area
OEM Upper Cowl Carbon is not enough for me, so I installed it on the Accent around the front. View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S1000F
It's gonna take some time.
It took quite a while to deliver, but I think the texture is good. View detail
Fits: HONDA VFR800, HONDA Rebel 250, HONDA Rebel 500, HONDA CBR400R, HONDA CBR650F, HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA 400X, HONDA CB1100, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB650F, HONDA CBR1000RR, HONDA NM4, HONDA GROM, HONDA CBR500R, HONDA CB500X, HONDA VFR800XCROSSRUNNER 125, HONDA CBR1000RR, HONDA CBR250RR(2017-)
Good vibes
[How is it used?
It looks better now
Was the one you received as per Image?
As per Image
Was the installation difficult?
I attached it carefully.
How was your experience with it?
The texture is now better.
[Included Parts:were they on?
It's not attached.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
There was a hang of pasting. In the cold season, it was written that it becomes soft when it warms lightly by Dryer etc., and it becomes easy to paste.
View detail
Fits: KAWASAKI Z900, KAWASAKI Z650, KAWASAKI NINJA650, KAWASAKI NINJA400, KAWASAKI NINJA250, KAWASAKI ZX-25R, KAWASAKI VERSYS-X 250, KAWASAKI VERSYS-X 250
Satisfied
It may be a little tricky to apply, but I'm satisfied with the look of Carbon Style. View detail