Reviews
I am satisfied
I replaced it for the basic look.
I bought the Motorcycle because I fell in love with the 2019MODEL EXTAR color, but I thought the Front Fender would definitely look good in Black.
I wanted to challenge myself in Setting, so I thought it would be better if I could see the Inner Tube.
The accuracy of the product is no problem as it is from a Japanese company. No need to write about it.
The installation was Large strange to me.
I have a Rear STAND, but not a Front one, so I removed the Caliper for the time being.
Once the caliper was removed, it became somewhat easier to turn and installation was completed.
Maybe it's just me, but is this what Radial Mount's Caliper is like? It was fine to remove it, but it was quite Large strange to put it back on.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
CarbonLong rear fender
No problems with installation, no distortion.
It is a Long Type, so it can play the role of a Fender.
Large Satisfied!
View detail
Fits: KAWASAKI NINJA H2SX, KAWASAKI NINJA H2SX SE, KAWASAKI NINJA H2SX, KAWASAKI NINJA H2SX SE
SPEEDRACarbon rear fender
I have installed the SPEEDRACarbon rear fender on my 25R and Z900RS and there was no distortion and the mounting holes did not have much gap, so I bought it for my H2SX. As for the installation, I had to install the OEM color in the upper mounting hole and fix it with the OEMBolt, but the hole was small and there was a gap from the center, so I had to use a semicircular bar to adjust the large hole position. But it was successfully installed. The other holes did not need to be enlarged and there was little distortion.:Pair (for Left and Right) The adjustment of the position of the material was done without any special attention.:Twill Weave Carbon glossy and cosmetic and looks better. The mud repellent effect may not be so promising…. View detail
It is a quality that makes it a Repeat!
The quality was identical to the product photo.
I bought a Manufacturer's first, but returned it because it fell a few steps short of the sample.
Comparing the two, Speedra would win except for its weight.
In terms of quality, it is close to HondaOEMOP's Dry carbon, and I guess the weight is the same etc.
It's more than twice the price, though, and since it's Matte, it's a plain girl.
After all, Material:Carbon Style beautiful here.
View detail
Appeal degree is high
Installed on a 2022 MT-09.
The OEMFender was short and I thought it was not good enough, so I replaced it with this part.
The glossy twill weave Type was selected. Although the replacement does not change the driving performance, the appearance is improved and the satisfaction is high.
It is also good to be able to choose 4Patterns, glossy or not, twill weave or plain weave, according to your preference.
Even beginners can work easily by simply removing the OEM-fixed screws and clips and returning them to the same fixed locations.
View detail
It can be installed on the '24 MODEL without any problem.
As I was changing to a '24 model ZX-6R, I was wondering if I could use the same exterior parts as far as the changes from the '23 model were concerned. We compared the images and were convinced that they were the same in shape, so we went ahead and obtained the CR-1 Coating to have it installed and asked Kawasaki Plaza to install it along with the vehicle maintenance.
As a result, they were able to install it without any modification.
The cable is fixed without any problems.
If possible, I would like to see Long Type developed as well.
View detail
Simple and cosy.
It is a solid and cost-effective version of the existing Fender Eliminator.
However, Reflector must be purchased separately.
Material:I also have a Fender Eliminator in Aluminum, but it is a bit heavier.
Ah! The box is pretty cool lol.
View detail
Also comes with zx4r
The side reflector interferes with the blinker, as it did with the zx4r. If you are concerned about it, please cut the bracket of the side reflector. View detail
There is a subtle rattling, though.
The chili is good, but the mounting points are not quite right and there is a little rattling. View detail
I had high expectations because of the high rating.
I was attracted by the installation method and the design, and I had high expectations for this product because it was highly rated, but I was disappointed because the accuracy was so poor.
I asked the Motorcycle shop to do something about it, and they did their best, but there was nothing they could do.
It's a good price, so it's a bit of a gap, but it's better than nothing, so I'm putting it on.
View detail
Fits: KAWASAKI Ninja 1000, KAWASAKI Z1000
Rear Fender for NINJA1000
The Rear Fender for NINJA1000 went on 1000sx with no problem!
I think it is also effective against dirt under the rear and dress-up because it is made of carbon!
OEM Rear Fender is too short
View detail
very good
Very nice, but if the Gold net was Black, it would have been 5 Stars. View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S1000F
Twill weave glossy! Beautiful!
The product is so beautiful that it is too good to install as a Fender. (I would install it at all)
There was no shape error with the OEM Shape.
If I may say so, each Bolt hole may be slightly smaller than the other, so it is better to check before installation.
A word about the installation process.
GSXS1000 if you want to replace Front Fender, Rear inner fender and Chain Guard, 'Better to remove the Tire, or else.' 。
The Front Fender cannot be replaced unless it is removed securely.
Chain Guard is also impossible because there is a fixed Bolt around the back of the Rear Sprocket. I think so.
For the rear fender, there is one bolt near the side of the tire with a hexagonal wrench that cannot be inserted and turned with ordinary tools.
This time, I cut down the Hexagonal Wrench to the size that would fit in the gap and managed to turn and remove it.
I was able to do it without removing the rear tire, but it was strange with the Large tire. (Lol)
If I had a Kill that I could remove the Tire, it would be fine.
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT-03, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT03
Satisfaction level is high.
Was the one you received as per Image?
This was the first time for us to use dry carbon parts, "I see... it's like this." It was like that.
Edge shape with a crumbly, crunchy, hard texture, you can tell it's handmade. not a Minus rating.
Was the installation difficult?
As per the earlier information, the holes on the Chain CoverRight Side are slightly misaligned.
It could be installed only by widening the hole horizontally by about 3mm
The Exhaust System side is fixed with Brake hose bolt.
[Included Parts:were they on?
They were all there.
[Was there anything that disappointed you?
nothing in particular
Other items that would be helpful
I cut the Mud Guard down to the point where it would not hit the Swing Arm when it was moved.
View detail
Impressed by the high product precision
No problems with functionality or aesthetics, and smooth installation due to its high precision. View detail
There is a terrible noise around 45 km/h.
OEM Product has 3 Bolt and 1 Rivet. This product has only 3 bolt locations and the Rivet is not fixed.
The Chain side can be fixed firmly, but the other side is fixed with one bolt, which is insecure.
The sound begins to be heard after 30 km, becomes extremely loud at 45 km, and becomes small after 50 km.
resonance with something (Resonance?) Are you doing it?
Rear mud and rainwater splash will be reduced. (I haven't run Wet Rd. yet) 。
View detail
Solidly built without being flashy.
There were not many pictures and it was hard to picture the installation, but when I finally installed it, I found it to be a simple design and to my liking. It is well made and I have no problems with it.
I happened to be able to purchase it at a low price through OutletSale this time, but I think the regular price is in the high category (I guess it can't be helped because I'm sure of the quality).
View detail
Overwhelming satisfaction
He said he was having a drink with a senior the other day when he clicked the button,..,
I don't remember buying it, but, I heard they got excited and bought it at a drinking party.
I regret buying it
coming to a place and being satisfied
View detail
Easy installation in 10 minutes
The left side chain guard is fixed in two places and the right side is fixed in one place via a bracket to complete the installation. View detail
Repurchased due to Spec. changes.
I used to have a Fender from this company, but I sold it once because I was bored with it, but a year and a half later I bought it again and looked at it again lol.
The installation is as easy as ever.
I wonder if we'll get an extended one too!
View detail