Reviews
I am satisfied
I replaced it for the basic look.
I bought the Motorcycle because I fell in love with the 2019MODEL EXTAR color, but I thought the Front Fender would definitely look good in Black.
I wanted to challenge myself in Setting, so I thought it would be better if I could see the Inner Tube.
The accuracy of the product is no problem as it is from a Japanese company. No need to write about it.
The installation was Large strange to me.
I have a Rear STAND, but not a Front one, so I removed the Caliper for the time being.
Once the caliper was removed, it became somewhat easier to turn and installation was completed.
Maybe it's just me, but is this what Radial Mount's Caliper is like? It was fine to remove it, but it was quite Large strange to put it back on.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
CarbonLong rear fender
No problems with installation, no distortion.
It is a Long Type, so it can play the role of a Fender.
Large Satisfied!
View detail
Appeal degree is high
Installed on a 2022 MT-09.
The OEMFender was short and I thought it was not good enough, so I replaced it with this part.
The glossy twill weave Type was selected. Although the replacement does not change the driving performance, the appearance is improved and the satisfaction is high.
It is also good to be able to choose 4Patterns, glossy or not, twill weave or plain weave, according to your preference.
Even beginners can work easily by simply removing the OEM-fixed screws and clips and returning them to the same fixed locations.
View detail
It can be installed on the '24 MODEL without any problem.
As I was changing to a '24 model ZX-6R, I was wondering if I could use the same exterior parts as far as the changes from the '23 model were concerned. We compared the images and were convinced that they were the same in shape, so we went ahead and obtained the CR-1 Coating to have it installed and asked Kawasaki Plaza to install it along with the vehicle maintenance.
As a result, they were able to install it without any modification.
The cable is fixed without any problems.
If possible, I would like to see Long Type developed as well.
View detail
There is a subtle rattling, though.
The chili is good, but the mounting points are not quite right and there is a little rattling. View detail
Fits: KAWASAKI Ninja 1000, KAWASAKI Z1000
Rear Fender for NINJA1000
The Rear Fender for NINJA1000 went on 1000sx with no problem!
I think it is also effective against dirt under the rear and dress-up because it is made of carbon!
OEM Rear Fender is too short
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT-03, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT03
Satisfaction level is high.
Was the one you received as per Image?
This was the first time for us to use dry carbon parts, "I see... it's like this." It was like that.
Edge shape with a crumbly, crunchy, hard texture, you can tell it's handmade. not a Minus rating.
Was the installation difficult?
As per the earlier information, the holes on the Chain CoverRight Side are slightly misaligned.
It could be installed only by widening the hole horizontally by about 3mm
The Exhaust System side is fixed with Brake hose bolt.
[Included Parts:were they on?
They were all there.
[Was there anything that disappointed you?
nothing in particular
Other items that would be helpful
I cut the Mud Guard down to the point where it would not hit the Swing Arm when it was moved.
View detail
Impressed by the high product precision
No problems with functionality or aesthetics, and smooth installation due to its high precision. View detail
Solidly built without being flashy.
There were not many pictures and it was hard to picture the installation, but when I finally installed it, I found it to be a simple design and to my liking. It is well made and I have no problems with it.
I happened to be able to purchase it at a low price through OutletSale this time, but I think the regular price is in the high category (I guess it can't be helped because I'm sure of the quality).
View detail
Overwhelming satisfaction
He said he was having a drink with a senior the other day when he clicked the button,..,
I don't remember buying it, but, I heard they got excited and bought it at a drinking party.
I regret buying it
coming to a place and being satisfied
View detail
I still prefer twill weave for Carbon's pattern.
I was torn between Magical racing and Speedra, both of which offer a choice of twill or plain weave, but I liked the shape of the OEM Front Fender, so I bought the Speedra version.
The installation itself was easy, and I was satisfied with the immeChain.
The product itself has a high quality feel.
Striker's Rear Fender (This is plain weave only) I wondered if it would be better to match the & shades that are so far apart from each other in the overall picture, but the shades are not that noticeable, so I try not to think of it as too much of a problem. (Lol)
View detail
Beautiful product
Very good quality product, perfectly fit to my yamaha yzf r6, I received good material and good condition product. Packing also very nice. View detail
Cospar good
[How is it used?
Material of resin parts for appearance ImageUp:CarbonorCarbon Style is being promoted as a replacement.
Rear Fenders are only available in expensive Real Carbon, so I had to settle for inexpensive Chinese Carbon Style Fenders.
I couldn't stand the cheapness of the large, prominent parts, so I replaced them with new ones.
Was the one you received as per Image?
also "Carbon Style" and Real Carbon look completely different.
The texture was as expected, although there were a few areas that were slightly less processed, such as the cut on the edges.
Was the installation difficult?
Simply remove and replace the 3 Screws and the plastic Pin.
It took me about 15 minutes to replace it, but if you have a NORMAL vehicle, you may not be able to access the Screw without removing the Silencer because it is in the way.
Also, I remember seeing a post earlier about not knowing how to remove the resin Pin, so I'll write it down.
By pushing in the circular part of the PinCenter until it stops, the inside claw closes and can be removed.
When it is hard, it can be pried out with a slotted screwdriver or the like, being careful not to damage other parts.
When attaching, insert the circular part in the reverse direction, pulling up the Pin. "Snap" The process is complete when you push in until you feel a response of "I'm sorry, I'm sorry.
How was your experience with it?
From a distance, the matte type may look like just a black resin, but up close, you can see that it is Carbon.
I am satisfied with Large because I prefer to see NORMAL at first glance, but in fact....
[Included Parts:were they on?
It came with two Stickers, a Carbon Key Holder, Instruction Manual, and a resin Pin.
I appreciate that Pin will eventually stop working if it is reused too many times.
[Was there anything that disappointed you?
It may be unavoidable in terms of strength since it is a Parts with a large area, but it was surprisingly thick for dry carbon, and not so much in terms of light weight.
Also, there were areas where the cut was not smooth at the edges of the sharply angled curves.
Opinions and requests to Manufacturer
I asked by e-mail whether the product is for Z900RS or Z900 as well, and received an immediate response that the OEM product number is the same, so it should be usable. We look forward to more high quality and reasonable products (compatible with Z900) in the future.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
legendary ssk
It's a neat fitting. Remove the genuine product and put it on top. Use the genuine product for the plastic rivet in the middle The left and right sides can be assembled using the enclosed spacer. It's longer than the original product, so I think it covers foreign substances a little bit more. I'm satisfied. View detail
Satisfied with appearance, pleased with performance
I had it installed at Motorcycle shop at the same time I took delivery of my car. According to 'Accuracy is very high for a product of this type.' The Center is properly centered on the Tire and there is no bias in Clearance.
We have heard that the inner fender is a long type like for Race or this product, which is quite a large type of parts and makes a strong assertive impression, so we decided to use the inner fender with the matte feeling like the Tire or Swing Arm surface. Unglazed Type This was the Large correct answer.:The understated luster on Carbon Style gives it an elegant custom look.
(”Light reflection” has a strong influence on people's perception, so you can change a strong impression even with small parts by using a matte finish when you want to weaken the impression and a glossy finish when you want to strengthen it).
There was no need to say anything about mud protection, since this is the Cover range, and there was not even any sand roll up.
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT-03, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT03
Installation time 5 min.
It is very lightweight, as Carbon is, and yet it has a solid texture. I thought it was well worth the price. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
I'm happy to install it!
The product is almost an OEM shape, so it can be installed without any modification. View detail
Fits: KAWASAKI Z250, KAWASAKI NINJA400, KAWASAKI NINJA250
This was good.
The company's Long Type was PeLePera and made a strange noise that made it unusable, but this was good.
The position of the Screw hole does not require any correction, and the Center is also out. There is no lack of strength in the product. There were some unevenness in thickness, but it was nothing to be concerned about.
It is a good product for those who are not dissatisfied with OEM Shape.
View detail
High quality feel of Twill Weave Carbon!
The GSX-R1000R does not come standard with a rear inner fender.
Therefore, after driving in the rain or in puddles, the area around the swing arm and rear suspension will become dirty with mud and other large discoloration.
I bought it because I have to do something about it because I get rained on almost 100% of the time when I go touring.
First of all, the product is packaged in a Large Kinadana Ball to prevent damage.
Included Parts:is carefully divided into Instruction Manual, Mounting Bolt, Bracket, Collar, Key Holder, and Stickerx2.
I chose the Twill Weave Carbon glossy and was pleased with the quality of the product, which is better than I expected. I am especially pleased with [Color] The gloss of Clear is wonderful. Also, the part of the reverse side that comes in contact with the swing arm has a cushion attached to it, which is also a nice attention to detail.
If the installation is done according to the Instruction Manual, which is easy to understand, there will be no problem. On the other hand, if you try to do it in a different way from the Instruction Manual, it will take more time.
The Fender is a type that is placed on top of the Swing Arm or Chain Guard, so it is quite large and a little wide, so it is easy to work with it after temporarily fastening the Bolt on the Right Side Bracket. It is easier to work after temporarily fastening the bolt of the Right Side Bracket.
The long type in the manufacturer's photo makes it look long, but in reality, it does not bother me at all. Thanks to this length, the effect of the mud shield is improved.
View detail
And don't worry about accuracy!
I think the texture and manufacturing is totally good.
I just wish the color of the Mesh part was Black.
Or you can choose to do so.
But I have no regrets at all.
View detail