Reviews
Carbon
Scratches on the Black colored Tank are inevitable, so install it before it gets worse.
It is easy to apply with double-sided tape.
The seam between the Tank and Seat is also rounded off so that it does not look out of place.
However, the part without Tape is creaking" when pressed, so it might be better to add more Tape.
Some edges are not able to follow the subtle curvature of the tank, but I don't mind.
View detail
Just right!
For me, it is not too large and not too small, just the right size. The installation can be done by anyone since all you have to do is stick it on, and the price is reasonable, and the change in appearance makes it a good value. View detail
I am satisfied
I replaced it for the basic look.
I bought the Motorcycle because I fell in love with the 2019MODEL EXTAR color, but I thought the Front Fender would definitely look good in Black.
I wanted to challenge myself in Setting, so I thought it would be better if I could see the Inner Tube.
The accuracy of the product is no problem as it is from a Japanese company. No need to write about it.
The installation was Large strange to me.
I have a Rear STAND, but not a Front one, so I removed the Caliper for the time being.
Once the caliper was removed, it became somewhat easier to turn and installation was completed.
Maybe it's just me, but is this what Radial Mount's Caliper is like? It was fine to remove it, but it was quite Large strange to put it back on.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
CarbonLong rear fender
No problems with installation, no distortion.
It is a Long Type, so it can play the role of a Fender.
Large Satisfied!
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
It looks Cool.
Purchased as points were accumulated,
It's just a look, but it's Cool's.
I think it is nice because it is in your line of sight when you are on it.
Simply apply it after cleaning and degreasing with Parts cleaner.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
The atmosphere has changed.
I've always wondered if OEM Silver could do something about it.
I purchased the twill weave glossy this time.
I was also worried about the matte Dry Carbon, but I thought that if I was going to buy a matte one, it would be cheaper to put a Carbon Seat on it, so I decided to buy the matte one.
I am satisfied with the change in atmosphere.
I'm going to take the Rivet out when I remove it, and I was wondering if a 3.2mm Drill would be better….
3.You can go with 5mm, but it's a little thicker…?
I don't have a problem with it.
I think 3mm is thin and hard to remove.
Also, it would have been better if the price was a little lower.
View detail
Sober Cool Products
I bought the twill weave matte finish. It is very easy to install, just take off the NORMAL one and replace it with the new one, which is a small one, so the replacement is not very noticeable and does not have any effect. It is a completely self-satisfying product, but that is what makes it so cool. View detail
The coloring is also good.
It's a bit pricey, but the Anodized color is great and it's one of the best products for hiding holes in Frames. View detail
Appeal degree is high
Installed on a 2022 MT-09.
The OEMFender was short and I thought it was not good enough, so I replaced it with this part.
The glossy twill weave Type was selected. Although the replacement does not change the driving performance, the appearance is improved and the satisfaction is high.
It is also good to be able to choose 4Patterns, glossy or not, twill weave or plain weave, according to your preference.
Even beginners can work easily by simply removing the OEM-fixed screws and clips and returning them to the same fixed locations.
View detail
Small in size, but large in appearance (installed on a 24-year model)
When purchasing the ZX-6R 24th model, the company considered converting the plastic parts to carbon to improve the quality of the appearance.
After comparing images and videos with the 2011 model, we determined that it could be used for the 24th model and purchased it.
Since CR-1Coating was scheduled to be installed as part of the car delivery maintenance, we brought the car to Kawasaki Plaza to have it installed in its installed condition, and the installation was done without any modification.
There were some comments to Review about poor Fitting, but I have no problems with mine.
Although these are small parts, I think they have a lot of impact in terms of appearance.
View detail
It can be installed on the '24 MODEL without any problem.
Required As I was switching to a '24 model ZX-6R, I was wondering if the exterior parts could be used for the '23 model, as far as the changes from the '23 model were concerned. I was convinced that they were the same in shape, so I went ahead and got them to have CR-1Coating installed, and asked Kawasaki Plaza to install them along with the vehicle maintenance.
As a result, they were able to install it without any modification.
The Swing Arm has a fixed part on the back, so it might be a bit odd if it's a DIY project.
View detail
Small parts, but looks like large parts (can be installed in 24 years model).
After comparing images and videos of the '24 and '23 MODELs, I wondered if it would be possible to divert it to the '24 MODEL as well. I asked Kawasaki plaza to install it along with the vehicle maintenance.
As a result, they were able to install it without any modification.
I was concerned because some reviews said the Fitting was not good, but the one I fitted seems to be fine.
Although these are small parts, they give a very different impression when installed.
View detail
It can be installed on the '24 MODEL without any problem.
As I was changing to a '24 model ZX-6R, I was wondering if I could use the same exterior parts as far as the changes from the '23 model were concerned. We compared the images and were convinced that they were the same in shape, so we went ahead and obtained the CR-1 Coating to have it installed and asked Kawasaki Plaza to install it along with the vehicle maintenance.
As a result, they were able to install it without any modification.
The cable is fixed without any problems.
If possible, I would like to see Long Type developed as well.
View detail
Fits: HONDA VFR800, HONDA Rebel 250, HONDA Rebel 500, HONDA CBR400R, HONDA CBR650F, HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA 400X, HONDA CB1100, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB650F, HONDA CBR1000RR, HONDA NM4, HONDA GROM, HONDA CBR500R, HONDA CB500X, HONDA VFR800XCROSSRUNNER 125, HONDA CBR1000RR, HONDA CBR250RR(2017-)
Recommendation for those who care about the appearance.
I applied it on my CB400SB, and it is an excellent shape, and I was able to apply it beautifully without any difficulty, just keeping in mind to apply it carefully and slowly. I think the adhesive power of this capPad is weaker in winter than in summer. View detail
Fits: SUZUKI V-Strom 650XT, SUZUKI V-Strom 650, SUZUKI V-Strom 1000XT, SUZUKI Vstrom 1000, SUZUKI GSX-S750, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-R1000R, SUZUKI GSX-R1000
Tank cap protection & dress-up
I bought it because it seemed to have the largest protective area among many products of the same et cetera.
It is also reasonably thick.
It is not such a difficult task, although care must be taken when attaching the outermost part.
Not only is it protected, but it also changes the look and feel of the LargeKiku, making it a highly satisfying Custom.
View detail
Really nice dress up accessory
I chose the titanium colour option & I wasn't disappointed. Even in the packaging it looked amazing. The product has a decent weight to it & is well machined. I do have one gripe.. Fitment is very tight and I had to use a mallet & a bit of physical effort to whack both caps into place. As a result; a small amount of the rubber O-ring (that is fitted to the cap) was stripped off (the cap itself & bike were undamaged) -I don't think it'll be an issue for waterproofing, but I doubt those caps are coming out any time soon. Please note: if it wasn't for the struggle to fit the caps, I would have given this product 5 stars. View detail
Carbon side panel for Speedra yzf-r7
Installed on yzf-r7, easy to install, although the additional panel on the Frame needs to be removed.
It also looks better. The appearance is tighter.
View detail
Fits: YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT03
Expensive, but good
I used to put DAYTONA on it. (cheap and easy to buy) I should have chosen Speedra from the beginning. View detail
There is a subtle rattling, though.
The chili is good, but the mounting points are not quite right and there is a little rattling. View detail
Self-sufficientParts
They are truly self-fulfilling parts.
"Effect." is effective in the sense that every time you get on and get off, you see it and feel great.
View detail