Reviews
Good quality and fit(almost)
Item arrived in a well seal packaging. Workman ship for carbon fiber is very good. The holes aligned correctly mostly except for one hold for the left panel below dashboard. View detail
it's the best
It is almost as good as OEMOption. View detail
very good
Very nice, but if the Gold net was Black, it would have been 5 Stars. View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S1000F
Twill weave glossy! Beautiful!
The product is so beautiful that it is too good to install as a Fender. (I would install it at all)
There was no shape error with the OEM Shape.
If I may say so, each Bolt hole may be slightly smaller than the other, so it is better to check before installation.
A word about the installation process.
GSXS1000 if you want to replace Front Fender, Rear inner fender and Chain Guard, 'Better to remove the Tire, or else.' 。
The Front Fender cannot be replaced unless it is removed securely.
Chain Guard is also impossible because there is a fixed Bolt around the back of the Rear Sprocket. I think so.
For the rear fender, there is one bolt near the side of the tire with a hexagonal wrench that cannot be inserted and turned with ordinary tools.
This time, I cut down the Hexagonal Wrench to the size that would fit in the gap and managed to turn and remove it.
I was able to do it without removing the rear tire, but it was strange with the Large tire. (Lol)
If I had a Kill that I could remove the Tire, it would be fine.
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT-03, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT03
Satisfaction level is high.
Was the one you received as per Image?
This was the first time for us to use dry carbon parts, "I see... it's like this." It was like that.
Edge shape with a crumbly, crunchy, hard texture, you can tell it's handmade. not a Minus rating.
Was the installation difficult?
As per the earlier information, the holes on the Chain CoverRight Side are slightly misaligned.
It could be installed only by widening the hole horizontally by about 3mm
The Exhaust System side is fixed with Brake hose bolt.
[Included Parts:were they on?
They were all there.
[Was there anything that disappointed you?
nothing in particular
Other items that would be helpful
I cut the Mud Guard down to the point where it would not hit the Swing Arm when it was moved.
View detail
Impressed by the high product precision
No problems with functionality or aesthetics, and smooth installation due to its high precision. View detail
Cap to be fixed by ORing
As shown in the Title, installation on the vehicle body is simply by pressing and ORing. (Shift change side) The first side has a large diameter for fixing, so it seems to be firmly attached. The other side is small in diameter, so it still feels a little wobbly after installation. I hope it will not fall off. View detail
SPEEDRA Tank Pad Dry Carbon
The OEM tank pad alone would rub against the top of the tank, so we chose the inexpensive SPEEDRA pad for the tank.
I am satisfied with the easy installation using only double-sided tape.
Material:Carbon Style is also matched to the chassis without any discomfort, just like OEMCarbon.
View detail
Screen bolt
Gold color stands out and looks cool!
ZrX1200 DAEG is the front side Quantity:The OEM is long for 2pc, but I was able to install this product without any problems!
View detail
There is a terrible noise around 45 km/h.
OEM Product has 3 Bolt and 1 Rivet. This product has only 3 bolt locations and the Rivet is not fixed.
The Chain side can be fixed firmly, but the other side is fixed with one bolt, which is insecure.
The sound begins to be heard after 30 km, becomes extremely loud at 45 km, and becomes small after 50 km.
resonance with something (Resonance?) Are you doing it?
Rear mud and rainwater splash will be reduced. (I haven't run Wet Rd. yet) 。
View detail
Elaborate Design Material:Aluminum Decorative Bolt
Small but elaborately designed Material:Aluminum Decorative Bolt.
Z900RS CAFE uses 5 bolts, but since M5 decorative bolts are hard to find, I bought a pack of 8 bolts to use for something if there are any left over.
Quantity:The PolycarbonateWasher in the set is a hard type, so I reused a NORMAL washer.
View detail
Fits: SUZUKI V-Strom 650XT, SUZUKI V-Strom 650, SUZUKI V-Strom 1000XT, SUZUKI Vstrom 1000, SUZUKI GSX-S750, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-R1000R, SUZUKI GSX-R1000
It was better than I could have imagined.
Tank caps in NORMAL are "Cheapish" I thought it was a good idea, so I bought it to try it out.
(There are other dress-up seals for SEA BASS tank caps, but as far as I know, this one covers the most area and has the best texture.)
When I put it up, it looked better than I had imagined.
The only drawback is the high price.
View detail
Solidly built without being flashy.
There were not many pictures and it was hard to picture the installation, but when I finally installed it, I found it to be a simple design and to my liking. It is well made and I have no problems with it.
I happened to be able to purchase it at a low price through OutletSale this time, but I think the regular price is in the high category (I guess it can't be helped because I'm sure of the quality).
View detail
Fits: SUZUKI V-Strom 650XT, SUZUKI V-Strom 650, SUZUKI V-Strom 1000XT, SUZUKI Vstrom 1000, SUZUKI GSX-S750, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-R1000R, SUZUKI GSX-R1000
It is quite a recommendation ^ ^.
I put it on my GSX-S750. If you are particular about the application, you may find it a little difficult to apply it to the outer edge, but if you are not too nervous, you can easily apply it to your GSX-S750. Although it is only a matter of self-satisfaction, I think it will increase the sense of quality of the appearance of the product and will also be effective in preventing wounds when refueling. The price is a little lower than I would have preferred, but I think it is unavoidable for this quality. Personally, I feel it is a very recommendation product. View detail
Overwhelming satisfaction
He said he was having a drink with a senior the other day when he clicked the button,..,
I don't remember buying it, but, I heard they got excited and bought it at a drinking party.
I regret buying it
coming to a place and being satisfied
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
If you work hard, you can do it!
The product itself is great.
It is not a very prominent product, but when installed, it is very tight.
To install, it is necessary to break the Rivet with a 3mm drill. Once broken, it is relatively easy to use the radio pliers to tighten the attached gears.
The double-sided tape that comes with the product does not stick very well, so it might be better to prepare it separately.
View detail
Fits: SUZUKI V-Strom 650XT, SUZUKI V-Strom 650, SUZUKI V-Strom 1000XT, SUZUKI Vstrom 1000, SUZUKI GSX-S750, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-R1000R, SUZUKI GSX-R1000
Speedra Tank capPad
Please tell us how you use it. Purchased to prevent tank scratches at the tip of the refueling gun when refueling.
Was the one you received as per Image? Large I'm strange
Was the installation difficult? If you can put it up carefully, I don't think you'll have a problem.
How was your experience with it? Looks and feels great!
[Included Parts:were they on? None
[Was there anything that disappointed you? None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
The custom feeling is sure to increase!
Last time I bought Blue and the Custom feeling is up!
In addition, this time, Gold was purchased to further enhance the custom feel!
It is very conspicuous!
View detail
Easy installation in 10 minutes
The left side chain guard is fixed in two places and the right side is fixed in one place via a bracket to complete the installation. View detail
Seat Cowl connected and Refreshing.
The Seat Cowl is also made of the company's Carbon, which gives a sense of unity.
I was hesitant to buy it because the price was so high, but when I put it on, I was glad that I bought it.
The Rear area is now fully Carbon Spec.
View detail