Reviews
Small in size, but large in appearance (installed on a 24-year model)
When purchasing the ZX-6R 24th model, the company considered converting the plastic parts to carbon to improve the quality of the appearance.
After comparing images and videos with the 2011 model, we determined that it could be used for the 24th model and purchased it.
Since CR-1Coating was scheduled to be installed as part of the car delivery maintenance, we brought the car to Kawasaki Plaza to have it installed in its installed condition, and the installation was done without any modification.
There were some comments to Review about poor Fitting, but I have no problems with mine.
Although these are small parts, I think they have a lot of impact in terms of appearance.
View detail
It can be installed on the '24 MODEL without any problem.
Required As I was switching to a '24 model ZX-6R, I was wondering if the exterior parts could be used for the '23 model, as far as the changes from the '23 model were concerned. I was convinced that they were the same in shape, so I went ahead and got them to have CR-1Coating installed, and asked Kawasaki Plaza to install them along with the vehicle maintenance.
As a result, they were able to install it without any modification.
The Swing Arm has a fixed part on the back, so it might be a bit odd if it's a DIY project.
View detail
Small parts, but looks like large parts (can be installed in 24 years model).
After comparing images and videos of the '24 and '23 MODELs, I wondered if it would be possible to divert it to the '24 MODEL as well. I asked Kawasaki plaza to install it along with the vehicle maintenance.
As a result, they were able to install it without any modification.
I was concerned because some reviews said the Fitting was not good, but the one I fitted seems to be fine.
Although these are small parts, they give a very different impression when installed.
View detail
It can be installed on the '24 MODEL without any problem.
As I was changing to a '24 model ZX-6R, I was wondering if I could use the same exterior parts as far as the changes from the '23 model were concerned. We compared the images and were convinced that they were the same in shape, so we went ahead and obtained the CR-1 Coating to have it installed and asked Kawasaki Plaza to install it along with the vehicle maintenance.
As a result, they were able to install it without any modification.
The cable is fixed without any problems.
If possible, I would like to see Long Type developed as well.
View detail
Used for side cowl
Changed from Silver to Black, good because it is less noticeable! View detail
Fits: HONDA VFR800, HONDA Rebel 250, HONDA Rebel 500, HONDA CBR400R, HONDA CBR650F, HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA 400X, HONDA CB1100, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB650F, HONDA CBR1000RR, HONDA NM4, HONDA GROM, HONDA CBR500R, HONDA CB500X, HONDA VFR800XCROSSRUNNER 125, HONDA CBR1000RR, HONDA CBR250RR(2017-)
Recommendation for those who care about the appearance.
I applied it on my CB400SB, and it is an excellent shape, and I was able to apply it beautifully without any difficulty, just keeping in mind to apply it carefully and slowly. I think the adhesive power of this capPad is weaker in winter than in summer. View detail
Fits: SUZUKI V-Strom 650XT, SUZUKI V-Strom 650, SUZUKI V-Strom 1000XT, SUZUKI Vstrom 1000, SUZUKI GSX-S750, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-R1000R, SUZUKI GSX-R1000
Tank cap protection & dress-up
I bought it because it seemed to have the largest protective area among many products of the same et cetera.
It is also reasonably thick.
It is not such a difficult task, although care must be taken when attaching the outermost part.
Not only is it protected, but it also changes the look and feel of the LargeKiku, making it a highly satisfying Custom.
View detail
Really nice dress up accessory
I chose the titanium colour option & I wasn't disappointed. Even in the packaging it looked amazing. The product has a decent weight to it & is well machined. I do have one gripe.. Fitment is very tight and I had to use a mallet & a bit of physical effort to whack both caps into place. As a result; a small amount of the rubber O-ring (that is fitted to the cap) was stripped off (the cap itself & bike were undamaged) -I don't think it'll be an issue for waterproofing, but I doubt those caps are coming out any time soon. Please note: if it wasn't for the struggle to fit the caps, I would have given this product 5 stars. View detail
Simple and cosy.
It is a solid and cost-effective version of the existing Fender Eliminator.
However, Reflector must be purchased separately.
Material:I also have a Fender Eliminator in Aluminum, but it is a bit heavier.
Ah! The box is pretty cool lol.
View detail
Well, I guess I'm satisfied.
I think the accuracy is somewhat good, but the Edge is a little hard to hit.
There are some gaps.
View detail
Carbon side panel for Speedra yzf-r7
Installed on yzf-r7, easy to install, although the additional panel on the Frame needs to be removed.
It also looks better. The appearance is tighter.
View detail
Also comes with zx4r
The side reflector interferes with the blinker, as it did with the zx4r. If you are concerned about it, please cut the bracket of the side reflector. View detail
Fits: YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT03
Expensive, but good
I used to put DAYTONA on it. (cheap and easy to buy) I should have chosen Speedra from the beginning. View detail
The quality is very good.
SPEEDRA:This is the first time I have purchased Carbon parts from Speedra.
I wasn't sure about the quality of the parts, but I wanted them as soon as possible, so I made the decision to purchase them in stock.
When we actually saw the product, we found it to be very solid Carbon and the Bolt position could be installed with almost no modification.
I purchased only the Top cover this time, but it would be better to purchase the Side cover as well to improve the balance of the appearance.
https://www.webike.net/sd/24196595/
View detail
There is a subtle rattling, though.
The chili is good, but the mounting points are not quite right and there is a little rattling. View detail
Self-sufficientParts
They are truly self-fulfilling parts.
"Effect." is effective in the sense that every time you get on and get off, you see it and feel great.
View detail
I had high expectations because of the high rating.
I was attracted by the installation method and the design, and I had high expectations for this product because it was highly rated, but I was disappointed because the accuracy was so poor.
I asked the Motorcycle shop to do something about it, and they did their best, but there was nothing they could do.
It's a good price, so it's a bit of a gap, but it's better than nothing, so I'm putting it on.
View detail
The matte texture is the best Parenthesis!
The entire vehicle has been blackened, but the one-point matte finish makes the tank and side covers stand out.
The Carbon texture is beautiful and I am absolutely RECOMMENDATION for the matte finish.
Custom feeling has increased.
Just changing the Injection cover would change the appearance considerably.
I should have changed it earlier.
If I had one complaint, it would be that the cosmetics are not very cost-effective.
View detail
Fits: KAWASAKI Ninja 1000, KAWASAKI Z1000
Rear Fender for NINJA1000
The Rear Fender for NINJA1000 went on 1000sx with no problem!
I think it is also effective against dirt under the rear and dress-up because it is made of carbon!
OEM Rear Fender is too short
View detail
Good quality and fit
Item arrived in a well seal packaging. Workman ship for carbon fiber is very good. The holes aligned correctly and a cushion strip is added to reduce vibration. View detail