Reviews
Fits: KAWASAKI NINJA H2R, KAWASAKI Ninja H2 SX SE, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2, KAWASAKI NINJA H2R, KAWASAKI Ninja H2 SX SE, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2
SPEEDRAMaterial:Twill Weave Carbon glossy Drive chain guard
The installation was not particularly difficult and was done by replacing the OEM.:Twill Weave Carbon shiny and looks up, the shape is more rounded than OEMGuard. View detail
Fits: KAWASAKI NINJA H2R, KAWASAKI Ninja H2 SX SE, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2, KAWASAKI NINJA H2R, KAWASAKI Ninja H2 SX SE, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2
On the heels of Carbonization
The accuracy of Parts is not bad. However, BoltQuantity:Is it natural that it's just a 2pc part? I'm just satisfied with the appearance of this Part. View detail
Fits: KAWASAKI NINJA H2R, KAWASAKI NINJA H2, KAWASAKI Ninja H2 SX SE, KAWASAKI NINJA H2 SX
Slightly difficult to shape and install
At the time of purchase of the Rear Fender of the company, the Image around the Swing Arm
I bought this along with the Swingarm Guard to unify them.
It is made much thicker than other Parts, and it is very chunky.
The strength is considered to be quite high.
It is a shape, but the edge of each side seems to come out in the photograph, but it is a shape that arrives
The outline of Parts is the same as OEM, but there is almost no edge on each side.
It was a rounded shape.
This may be the case with this one, but it is the same as the picture, H2SX!
I thought it was similar to the OEMParts with the Edge effect of the
I was quite disappointed.
In addition, when it installs, OEM is made along the Swing Arm shape, and there is a sense of discomfort.
It is not, but this seems to be attached distortedly because of the shape that the part is a little off.
It looks like
If you look at the parallelism between the Chain and the Body, you will see that they are parallel.
It doesn't seem to be wrong.
I can understand a little gap if it is a large size part, but for a part of this size.
I felt that the details were a little sweet.
Installation is the most difficult of the three Parts I purchased this time.
The addition itself is just a matter of widening the hole a bit to allow the OEM collar to pass through.
If you don't find the right direction to spread the bolt, it will be difficult to tighten the bolt.
There are two Bolt locations, one on the side and one on the bottom.
First I removed the OEM, then I aligned it and tried to find a direction to widen the hole.
It is better to
If the Bolt is misaligned as described above, it will be difficult to tighten.
However, if the collar is made into a long hole, it will not fit in the hole.
It is thought that it does not stop tightly.
Once the hole expansion is complete, run the OEM Color through the RubberWasher that comes with the
Insert the bolt from the reverse side into the hole of this part, as opposed to the OEMParts installation.
Stop.
There is one point to note when removing the OEMParts and installing thisParts.
The Bolt here is quite hard because of the powerful screw lock agent.
Also, the lower Bolt stops at a slight angle from front to back.
Therefore, it is necessary to make sure that the direction of the screw and the position of the hex do not deviate when removing and installing.
Make sure the bolt direction is straight and push it in firmly to turn.
The Bolt has a slightly low head, so the Hex is shallow, and if you're not good, the Bolt's
It will lick the hexagonal part.
View detail
Fits: KAWASAKI NINJA H2R, KAWASAKI Ninja H2 SX SE, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2, KAWASAKI NINJA H2R, KAWASAKI Ninja H2 SX SE, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2
It's a small part, but it stands out!
I have an Inner fender made by Speedra, and I bought their Drive chain guide.
Spec. is the same as Fender, twill weave with gloss. The look is definitely better than OEM plastic parts.
In my case, I was able to replace it with Bolt On without having to modify the hole processing at all. However, the quantity:2pc. If you have a HexaWrench for Ratchet, it is easy.
It is a small part, but it is unexpectedly conspicuous, and I think that it is a reasonable price if it is thought that it is made of Dry carbon.
View detail
Fits: KAWASAKI NINJA H2R, KAWASAKI Ninja H2 SX SE, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2, KAWASAKI NINJA H2R, KAWASAKI Ninja H2 SX SE, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2
Satisfied?
Material:Carbon product, clean and good installation.
It's just expensive...
But I'm satisfied.
View detail
Fits: KAWASAKI NINJA H2R, KAWASAKI Ninja H2 SX SE, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2, KAWASAKI NINJA H2R, KAWASAKI Ninja H2 SX SE, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2
Installation is Large
The holes are not in the right position or thickness.
Anyway, the adjustment is Large strange.
The included RubberWasher makes no sense.
It is written in the Construction Manual that the holes may need to be adjusted, but it is not that Level.
View detail
Fits: KAWASAKI NINJA H2R, KAWASAKI Ninja H2 SX SE, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2, KAWASAKI NINJA H2R, KAWASAKI Ninja H2 SX SE, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2
The product is as expected and satisfactory.
Shop was happy to get it sent to me earlier than the deadline! 。 For more information about the product, see Material:Because it is a carbon product, there is a sense of luxury and I am satisfied with Large.
If possible, it would have been better if a protective film had been put on the product, as I have to be careful not to get Wound on it when I install it.
View detail
Fits: KAWASAKI NINJA H2R, KAWASAKI Ninja H2 SX SE, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2, KAWASAKI NINJA H2R, KAWASAKI Ninja H2 SX SE, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2
good good
It's very good. The price is very good. I'll use it often. And also recommended I'll do it. Please take care of me. It was a pleasant shopping trip. ^^ View detail