Reviews
Fallen cannibals
I don't want to experience the effects, but I put it on as a precaution against falling.
Installation can be done by anyone.
The previous owner had KFACTORY on the Front, so I looked for it, but I couldn't find one for r1000r, so I went with Speedra for the Rear.
Since the Front Fender was changed to Speed La, the ratio of Speed La is likely to increase in the future.
View detail
It looks great!
I think this is a product that is hard to appreciate until you fall on it, but it looks Parenthesis good! I have been hearing a lot about Speedra recently, and I would like to continue to use Speedra in my Front Fender and Lever relationships! View detail
I think it's a little too Large.
The Cowl is easy to install because there is no modification, it is cheap to work with, and it is very helpful for the Large size change. View detail
Fits: KAWASAKI NINJA H2R, KAWASAKI Ninja H2 SX SE, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2, KAWASAKI NINJA H2R, KAWASAKI Ninja H2 SX SE, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2
SPEEDRAMaterial:Twill Weave Carbon glossy Drive chain guard
The installation was not particularly difficult and was done by replacing the OEM.:Twill Weave Carbon shiny and looks up, the shape is more rounded than OEMGuard. View detail
Quite high quality
We have not taken into account what happens in the event of a fall from the beginning. (If it is just a standing fall, the Pannier and Frame Slider will be grounded, but not the Swing Arm.)
Therefore, although there was a cheaper Axle Slider that was a little smaller, I chose this product because I wanted a red undercarriage accent (since the wheel's rim tape is red, I wanted to unify the undercarriage accent in red).
I am satisfied, although it seems a little too large.
It would have been nice if Bolt was the same color, but I think I should have painted that much myself.
Incidentally, the compatible car models on Webike did not include the GSX-S1000GT, but the SPEEDRA webpage included the GT, and it could actually be installed without any modification.
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI ZX-10R, KAWASAKI ZX-6R, KAWASAKI NINJA1000 (Z1000SX), BMW S1000RR, DUCATI , HONDA , KAWASAKI Z800, SUZUKI , TRIUMPH DAYTONA675, BMW S1000RR
The texture is elegant.
I bought it just for the looks.
The quality is good and I have no complaints.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Matching
The color really matches the bike perfectly. Anyone can install it. It's not difficult. The quality is good and the weight is good.
I also want to mount it on the rear wheels of my vehicle, but I can't purchase it because it's not for sale.
Thank you for the fast delivery. I will come back to purchase again. -------------------------------------------------- -------- The bike is really perfect ~ Anyone can do it. Not difficult. The quality is good and the weight is good. I want to install the rear wheel of my car, but I can't buy it because there is no sale. Thank you for your fast delivery and come to buy a visit again. Powered by Google Translator
View detail
The effect is not so good.
First of all, it was easy to install, but as the description says, the product is not as perfect (quality) as it should be because it comes off in parts.
As for the driving, the GSX1300R HAYABUSA was still a hot mess in the city.
On the highway, the effect cannot be measured because it was originally not in a state of heat hell even before it was installed.
All of our GSX1300R HAYABUSA friends have installed A-TECH products, and we recommend them because they have a good fit and a reputation for being highly effective, and they are much less expensive.
The only drawback is that it is a popular made-to-order product, and when I inquired about the delivery date, I was told that I would have to wait 4-5 months.
Since the time of purchase was summer, I weighed the heat hell of the GSX1300R HAYABUSA against this product, which was in stock and delivered immediately.
I feel like it backfired on me...
View detail
It is easy to install.
I don't want it to function, but I am satisfied with the aesthetics. View detail
It is easy to install.
We are satisfied with the aesthetics of this component, although we do not want it to demonstrate functionality. View detail
Fits: KAWASAKI NINJA ZX-14R, KAWASAKI ZX-10R, KAWASAKI NINJA H2, KAWASAKI NINJA H2SX/SE
I am satisfied with the high quality and Large
It is a bit expensive compared to others.
The quality of the product is commensurate with the high price, so I don't think I will regret it. I used to install one from another manufacturer, but this one has a more luxurious feel and a better design than the previous one, so I will buy one from the same manufacturer the next time I buy a motorcycle.
Large Satisfied!
View detail
tipping over measures
Use in Gymkhana.
I bought it because the Axle contacts the road surface in a fall and is scraped off.
It is a good product and easy to install.
View detail
Speedra Frame Slider
It is easy to install., I think it will be useful not only in Circuit but in all situations as an insurance policy in case of a fall. View detail
Is it useful or not?
It is unclear whether it will serve as a Slider, but it has high Quality as One Point Decorative Parts. The price is reasonable, and it is a gem of Recommendation. View detail
Aiming to be WSBK-like.
The standard cover is a rubber cover with a split pin, but it can also be a rubber cover.
Split Pin is not available when it comes to this product.
As stated in the product manual, retightening checks are required every 500 km.
I think it's a good idea for those who run Circuit to have their vehicles inspected rather frequently.
Otherwise, if the frequency of inspections is low, I think it would be better to go as OEM.
View detail
Fits: HONDA , DUCATI , KAWASAKI Z1000 (water-cooled), KAWASAKI Z800, KAWASAKI ZX-10R, KAWASAKI ZX-6R, SUZUKI , TRIUMPH DAYTONA675, BMW S1000RR, KAWASAKI NINJA1000 (Z1000SX), BMW S1000RR
Stand hook slider
The maintenance stand is J-TRIP's V-receiver. View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI ZX-10R, KAWASAKI ZX-6R, KAWASAKI NINJA1000 (Z1000SX), BMW S1000RR, DUCATI , HONDA , KAWASAKI Z800, SUZUKI , TRIUMPH DAYTONA675, BMW S1000RR
The finish looks good.
I am satisfied with the look and feel of the product. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
If you're a stickler for dry carbon …
First of all, the shape is different from the OEM.
There are no holes in the OEM plastic mounting area, so it is held in place against the Frame.
I think there are individual differences, but the one I received had a gap in the hole position, so I extended it and installed it.
Just like with Rear Fender. [Color] Clear paint and Garbage are also awesome.
You can see it if you look at the chili together and away from it from a distance.
The polish also leaves the Paper eye stiff, and it feels like it is stroking a flat surface.
If you can rework it, it is good for Base.
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI ZX-10R, KAWASAKI ZX-6R, KAWASAKI NINJA1000 (Z1000SX), BMW S1000RR, DUCATI , HONDA , KAWASAKI Z800, SUZUKI , TRIUMPH DAYTONA675, BMW S1000RR
It protected the body of the car.
It protected the body of the car when it was standing on the ground.
Slider took care of the damage and I repurchased.
View detail
Large Scale
I installed it and drove around without any inconvenience or problems while driving. It is larger than I thought it would be, so if you are concerned about how it looks, I would not recommend it. I only put it on as insurance in case I fall off the bike, but if I didn't fall off, I wouldn't need it. View detail