Reviews
It looks cool!
I changed from the OEM Exhaust Cover and am happy with the improved look.
No modification is required, and the Bolt can be used for OEM applications.
Recommended if you are buying for looks and not expecting weight savings.
However, I think the price is a little high for this ….
View detail
Lighter weight due to carbonization (can also be installed in 24-year model)
The 24 model ZX-6R has no major differences from the 23 model in terms of front face, meter changes, and compliance with gas emission regulations, and even when comparing videos and images, I felt that there were few changes in the others. I asked Kawasaki plaza to install the coating with the car delivered to me for maintenance.
As a result, they were able to install it without any modification.
NORMAL is made of Gold genus, so Material:Carbon will be used to reduce weight.
I thought it was well thought out with the heat shield tape attached to the reverse side of the product.
Fitting is good with no interference with Exhaust System or Cowl.
View detail
Certainly the holes don't match.
The holes do not align as shown in the previous Review.
It is made to be fastened in three places, but it can be done by cutting the holes on the exhaust system side with a sander and fastening it in two places in the front and rear. It seems to be strong enough, and the NORMAL cover looks lame. It is a good item for those who are considering to use Slip-on Silencer for vehicle inspection and are tired of this cover because it is too shabby.
If you don't mind cutting and shaving, I'd buy it.
View detail
High satisfaction
It is already just for looks, but the quality is high and I am very satisfied with it.
Look at it and grin.
Installation is also super easy.
View detail
High satisfaction
Looks were tightened up.
Installation is very easy.
View detail
difficult to install
The hole positions are slightly different from OEM Parts, and although installation is possible, it requires a little more work. View detail
Exhaust Cover Dry Carbon
It is impossible to install anything but a Normal muffler.
I asked the Motorcycle shop, but they said it is not a Level that can be processed.
Can I bite the spacer and float the large size? It is said that the appearance is sacrificed.
I heard that even if you shave the body and change the position of the holes, you can make the body about half as small.
AKRAPOVIC product S-K10SO28-ASZTBLSlip-on Silencer is
Exhaust pipe part is too thick, they say it hits too hard.
AKRAPOVIC products are not unusually thick.
I can't conclude that anything other than Normal muffler will do.
View detail
Following Rear Fender
What made you decide to buy?
I purchased a Speedra Rear Fender in September. After purchasing it, I found out that Speed La's Material:I was amazed at the quality of the Carbon product and was truly captivated by Speedra! (Lol) Following the Rear Fender, the Exhaust Cover has been on my mind for a long time! I just popped it in the spur of the moment the day before the sale ended because it takes time for the next delivery once the stock runs out. In case you are wondering, Speedra's Material:If you're an Owner thinking about buying Carbon, get it while it's still in stock!
How was your experience with it?
The exhaust cover is made of dry carbon, the same material as the Rear Fender, so it is much lighter and stronger than the OEM steel exhaust cover. Furthermore, the back of the cover is covered with a heat resistant heat seal to withstand the heat of the exhaust. Dry carbon is completely different from conventional wet carbon, and is produced using the latest carbon processing technology, boasting ultra-light weight and ultra-strength. Dry carbon is also used in aircraft, F1, Sue Parka, MotoGP, etc. I can't get close to my 6R MotoGP machine, but I can't stop smiling every time I look at the dry carbon Rear Fender and Exhaust Cover.
[How was the installation?
To match with Rear Fender this time Twill weave/glossy in the Instruction Manual. All of our dry carbon products are handmade and finished. Slight variations and errors may occur." The OEM parts were made as well as the OEM parts, and I could feel the craftsmanship of the craftsmen. Also, some of the OEM parts from the OEM exhaust cover (Damper, color) The mounting holes fit perfectly and the installation was completed without any modifications.:All Carbon products, both matte and glossy, are UV-cut processed, so they can withstand UV rays and can be used safely.
[Others]
Like Rear Fender, Speedra's Sticker and Material:A Carbon Key Holder is included.:Carbon's Key Holder, it's a quality that really should be sold.
View detail
Parenthesis looking good
I ran it on the GSX-S1000.
The strength, shape, etc. are perfectly fine, and the carbon looks very beautiful.
The replacement is very simple, just remove the OEM exhaust guard and replace it by inserting the protrusion on the silencer into the back of the product. (Hook) You will need a Material:The only thing you need to be careful about is that it is made of carbon, so if you insert it too hard, it may crack.
It is much lighter than the OEMExhaust Guard, so I think it helps reduce weight along with its appearance.
We recommend this product to those who are using the OEM exhaust system, or those who are using an external exhaust system that can be used with the OEM exhaust guard, and want to have one point.
View detail
Dress-up of MONKEY125
The installation itself is easy, but you need to expand the installation hole by yourself as described in the Instruction Manual.
I like CarbonMaterial, so I like it.
View detail
Exhaust System and Quantity:Set
When I changed the Exhaust System, I changed it together.
I wanted to have twill weave glossy, but it was not in stock, so I chose this one.
I'm glad that even the plain weave glossy is totally Parenthesis good.
I was able to install it without any hassle and without any hole gap.
The Bolt circled in red in the image is the Bolt required for the OEM Exhaust System, but will not be required after replacement.
I'm kind of wearing it.
View detail
It's a casual Custom, but …
I wanted to buy an exhaust system but it was too expensive so I decided to use this product to customize my exhaust system. I'm very happy with the Large version. I'm very happy with it. View detail
Fits: SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000
Parenthesis is good!
I changed the Exhaust Cover along with the WYVERN Exhaust replacement
It looks Gorgeous
Easy to install No special processing is required
However, I felt that the installation of the Aluminum Tape on the back side was a little crude However, it is Large strange satisfaction
View detail
If you're not satisfied with the OEM exhaust cover
If you buy an external exhaust system, you can get a large exhaust cover as well Many of them come with Carbon, though
YOSHIMURA's Slip-on Silencer HEPTA FORCE CYCLONE With EXPORT SPEC, Cover uses the OEM as it is, so you can choose the material and texture to give it a slightly mismatched appearance
If you want to unify, choose Carbon
View detail