Reviews
Fits: HONDA VFR800, HONDA Rebel 250, HONDA Rebel 500, HONDA CBR400R, HONDA CBR650F, HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA 400X, HONDA CB1100, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB650F, HONDA CBR1000RR, HONDA NM4, HONDA GROM, HONDA CBR500R, HONDA CB500X, HONDA VFR800XCROSSRUNNER 125, HONDA CBR1000RR, HONDA CBR250RR(2017-)
Recommendation for those who care about the appearance.
I applied it on my CB400SB, and it is an excellent shape, and I was able to apply it beautifully without any difficulty, just keeping in mind to apply it carefully and slowly. I think the adhesive power of this capPad is weaker in winter than in summer. View detail
Fits: YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-09 To Racer, YAMAHA FJR1300, YAMAHA FZ1FAZER, YAMAHA FZ6-SFAZER, YAMAHA FZ6R, YAMAHA FZ8, YAMAHA XJ6DIVERSION, YAMAHA XSR900
Looks like a Large thing.
Replaced the Brake master cylinder cap, which is functionally fine as long as it is not leaking, but I bought it in the hopes that it would look better than anything else. In that respect, it is a zero. However, the price is high, but I was worried about cheap ones, so I compromised. I am glad that the included Screw is a hex Type. Because the original +Screw was about to be licked. I am satisfied overall. View detail
Handlebar Brace
I installed it to attach the Smartphone Holder. Installation is easy. I think this is a better choice if you are going to attach a Smartphone Bracket, as the Gold amount is not that different. View detail
Fits: SUZUKI V-Strom 650XT, SUZUKI V-Strom 650, SUZUKI V-Strom 1000XT, SUZUKI Vstrom 1000, SUZUKI GSX-S750, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-R1000R, SUZUKI GSX-R1000
Tank cap protection & dress-up
I bought it because it seemed to have the largest protective area among many products of the same et cetera.
It is also reasonably thick.
It is not such a difficult task, although care must be taken when attaching the outermost part.
Not only is it protected, but it also changes the look and feel of the LargeKiku, making it a highly satisfying Custom.
View detail
Really nice dress up accessory
I chose the titanium colour option & I wasn't disappointed. Even in the packaging it looked amazing. The product has a decent weight to it & is well machined. I do have one gripe.. Fitment is very tight and I had to use a mallet & a bit of physical effort to whack both caps into place. As a result; a small amount of the rubber O-ring (that is fitted to the cap) was stripped off (the cap itself & bike were undamaged) -I don't think it'll be an issue for waterproofing, but I doubt those caps are coming out any time soon. Please note: if it wasn't for the struggle to fit the caps, I would have given this product 5 stars. View detail
Handlebar Brace
The length can be adjusted to accommodate a variety of motorcycles. View detail
Simple and cosy.
It is a solid and cost-effective version of the existing Fender Eliminator.
However, Reflector must be purchased separately.
Material:I also have a Fender Eliminator in Aluminum, but it is a bit heavier.
Ah! The box is pretty cool lol.
View detail
Fits: HONDA CBR400R, HONDA CB400F, HONDA CBR650F, HONDA CBR400R, HONDA CBR250R, HONDA CB250R, HONDA CB250F, HONDA CBR650R, HONDA CBR500R, HONDA CB500F, HONDA CB300R, HONDA CBR500R, HONDA CB500F, HONDA CB300R
Parts removal and appearance change
I didn't want to wear a long and big Balancer because my body is small, but I didn't want to wear a long and big Balancer to reduce vibration. I couldn't find it, so I bought it. View detail
Fits: HONDA CB1000R, HONDA CBR1000RR
not quite
This product is not suitable for people with short fingers. View detail
Fits: KAWASAKI ZEPHYR400 χ, KAWASAKI ESTRELLARS, KAWASAKI ESTRELLA, KAWASAKI ZZR600, KAWASAKI ZZR400, KAWASAKI ZZR250, KAWASAKI ZXR400, KAWASAKI ZX-9R, KAWASAKI ZRX400, KAWASAKI Z750S, KAWASAKI Z750, KAWASAKI W800, KAWASAKI KLE400, KAWASAKI EX-4, KAWASAKI ER-6f, KAWASAKI ER-6n, SUZUKI GSX250FX , KAWASAKI VERSYS, KAWASAKI BALIUS2, KAWASAKI BALIUS
good-looking
It looks better. There was a little rattling, but it works fine. View detail
Well, I guess I'm satisfied.
I think the accuracy is somewhat good, but the Edge is a little hard to hit.
There are some gaps.
View detail
Carbon side panel for Speedra yzf-r7
Installed on yzf-r7, easy to install, although the additional panel on the Frame needs to be removed.
It also looks better. The appearance is tighter.
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CB1000R, YAMAHA YZF-R1, YAMAHA MT-10, YAMAHA YZF-R6, YAMAHA MT-09, YAMAHA MT-09 TRACER, YAMAHA XSR900, YAMAHA TRACER900, YAMAHA MT-07, YAMAHA XSR700, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA MT-03, SUZUKI GSX-R1000, SUZUKI V-STROM250, SUZUKI GSX-R600, SUZUKI GSX-R750
NINJA
It looked better and was very nice. View detail
Also comes with zx4r
The side reflector interferes with the blinker, as it did with the zx4r. If you are concerned about it, please cut the bracket of the side reflector. View detail
Fits: YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT03
Expensive, but good
I used to put DAYTONA on it. (cheap and easy to buy) I should have chosen Speedra from the beginning. View detail
The quality is very good.
SPEEDRA:This is the first time I have purchased Carbon parts from Speedra.
I wasn't sure about the quality of the parts, but I wanted them as soon as possible, so I made the decision to purchase them in stock.
When we actually saw the product, we found it to be very solid Carbon and the Bolt position could be installed with almost no modification.
I purchased only the Top cover this time, but it would be better to purchase the Side cover as well to improve the balance of the appearance.
https://www.webike.net/sd/24196595/
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
A Strong Quality
These heel plates are perfectly finished and very strong -- long life is expected! Matte twill carbon makes an attractive contrast with the gloss black Z900RS frame. When fitting the right-side plate, use great care when aligning the rear brake master cylinder to avoid cross-threading damage. Spend extra time and be happy, even invite a friend to help you. Excellent customer service and rapid shipping by Web!ke Japan, you guys and gals are #1! Thank you very much. View detail
The color is different from what I expected, darker Green Light type.
It would be nice if it were a little closer to the Kawasaki color Green Light type. View detail
I am satisfied with the product as expected ??!
I installed the MININarrow handle on my PCX125 with the replacement of the MININarrow handle. I was able to install the Smartphone Holderetc. with no problem. View detail
Fits: KAWASAKI Z750R, KAWASAKI Z1000, KAWASAKI NINJA ZX-6R, KAWASAKI NINJA ZX-10R, KAWASAKI NINJA1000
The Handlebar area is tightened in Black.
[How is it used?
We replaced the external lever worn by the previous owner with this SPEEDRA lever.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
It was not too difficult. I think it is Large sturdy even for beginners.
How was your experience with it?
The handlebar area is blacked out for a good look and easy operation.
[Included Parts:were they on?
It was attached.
[Was there anything that disappointed you?
There was nothing in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail