Reviews
DIYParts
It was a big help that we were able to get a large number of parts for modification, not just dedicated parts for that particular car model. View detail
Fits: HARLEY-DAVIDSON Universal
TE250i for Silencer.
I purchased this Glass Wool because the Exhaust System sound of my TE250i was getting DrumstickDrumstickDrumstickDrumstick noisy.
Silencer removal
↓
Remove 4 Bolt and pull out the contents.
↓
Wrap new Glass Wool and temporarily fix with masking tape
↓
Assemble in reverse order to complete.
(Gloves, Mask and Glasses are required)
After the replacement, the volume became quieter with a thump-thump-thump.
If you are looking for Silencer for KTM/Husk/GasGas system, this productQuantity:The large size can be replaced twice in 1 pc! (I think it costs about 5,000 yen if you buy OEM product)
Now I'm hoping for durability.
View detail
Fits: HARLEY-DAVIDSON FLSBMODEL, HARLEY-DAVIDSON TRYGruid, HARLEY-DAVIDSON Free Wheeler
SportsGruidOEM Gasket Compatible
I purchased this product because I needed it for the installation of a SportsGruid external Slip-on Silencer.
If you try to reuse them, it is safe to purchase new ones as they are RiskLarge and will be damaged and collapsed.
It is a conscientious product that is compatible with HarleyOEM Gasket and the price is definitely lower without feeling any difference in quality.
View detail
Fits: HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SOFTAILFamily
Exhaust System Replacement
Used for Exhaust System replacement. View detail
The flanged style O2 sensor bung allows for an easier and cleaner weld
About quality and texture, I can confirm that the quality is great and that the material used is raw finished cold rolled steel. About the feeling of use, The flanged style O2 sensor bung allows for an easier and cleaner weld. A necessary addition to allow for the installation of an O2 sensor onto the exhaust pipe. Perfectly sized to allow for welding and threaded to accept the DynoJet wideband O2 sensor. Products to buy together, To allow for the sealing of this O2 sensor bung once the tuning has been completed and the wideband O2 sensor removed, it would be ideal to add a O2 sensor plug bolt to your cart. Difficulty of installation, I can say the fitment of the O2 sensor bung was out of my capabilities as I cannot weld. I marked the desired location then removed the exhaust pipe and took it to my local fabricator to have it welded into place.Cost performance and comparison with other products, The pricing of the product is great. You receive a cheap O2 sensor bung made of a suitable material with a smarter design to easily secure it to the exhaust pipe with a clean weld. Other brands offer higher priced options but I am satisfied with my choice. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
A necessary addition to allow for the installation of an O2 sensor onto the exhaust pipe
About quality and texture, I can confirm that the quality is great and that the material used is raw finished cold rolled steel. About the feeling of use, A necessary addition to allow for the installation of an O2 sensor onto the exhaust pipe. Perfectly sized to allow for welding and threaded to accept the DynoJet wideband O2 sensor. Products to buy together, To allow for the sealing of this O2 sensor bung once the tuning has been completed and the wideband O2 sensor removed, it would be ideal to add a O2 sensor plug bolt to your cart. Difficulty of installation, I can say the fitment of the O2 sensor bung was out of my capabilities as I cannot weld. I marked the desired location then removed the exhaust pipe and took it to my local fabricator to have it welded into place.Cost performance and comparison with other products, The pricing of the product is great. You receive a cheap O2 sensor bung made of a suitable material with a simple design to secure to the exhaust pipe. Other brands offer higher priced options but I am satisfied with my choice. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
There is BALI and it's dangerous.
As per the Title. I have no problem using it, but there is a lot of BALI and I almost cut my hand accidentally.
It is strongly recommended to remove the BALI by sandpaper, etc. before use.
This product is a recommendation because it will not burn or scorch the Motorcycle Cover when riding!
View detail
For Exhaust System production
Used to make an exhaust system for a YamahaXV750E.
The Pipe itself is an ordinary steel Pipe.
However, the 38mm, 42.7mm, 45mm, 50.8mm, etc. that are generally used for exhaust systems are all available.
The bending angle can also be selected by about 10°.
If you are able to measure well, you may be able to make it with just Cut and weld.
In my case, there were numerous areas where I wanted to make some of the curves tighter, so I ended up chopping them up, but I think a normal under-turned Exhaust System can be made to look good.
Welding was also easy because the roundness was kept almost perfect, including the bending parts.
The Cut on the end face is also well vertical, so if the part can be used as is, you will be happy.
View detail
Fits: HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON S&S X-WEDGE Engine
In preparation for vehicle inspection
The gasket of the exhaust pipe had not been changed for decades, and since it was rare to remove the exhaust pipe, it had been overlooked. As expected, the Gasket had not been changed for decades, so it had almost lost its function. I have to do a thorough check once in a while. View detail
Necessary and sufficient. Pay attention to screw specifications
I tightened it at 50Nm with no problem.
Deep socket is required because the screw is longer than OEM Product.
(15mm is recommended for 5/8inch because it has a large rattling.)
View detail
Fits: HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SPORTSTERFamily
FXDC DYNA SUPER GLIDE CUSTOMExhaust pipe replacement
I reuse it twice or so, but it gradually loses its elasticity due to rust, etc., so I replace it. View detail
For Exhaust System production
I purchased this product to make an Exhaust System for my YamahaXV750E.
Various Pipe diameters and bending angles are available, but the one selected this time has a diameter of about 38.1mm, a thickness of about 1.6mm, a bending R of 100, and a bending angle of 180°.
We chose Steel, of course, because we make SteelOnly for the convenience of MIG welding.
I didn't specifically choose it for its sound quality or performance, so if I had the equipment to weld Stainless Steel, such as TIG welding, I would choose Stainless Steel without hesitation.
I thought 38φ was thin for a 750cc 2 cylinder? I thought so, but it is a little thicker than the OEM bore.
OEM exhaust pipes are double-tubed, so the inside diameter is narrower than it appears.
Since thicker is not better, we plan to start with 38φ and gradually expand it to 50.8φ at the aggregate.
The Pipe itself is a very ordinary wound Pipe, but the quality was good.
The dimensions were also as described, a 180 degree Turn with a Beauty R.
In this case, the twists and turns and the sprockets were necessary because it was to be made for a rear bank.
I went to the trouble of choosing 180 degrees, but I ended up chopping it up lol.
From here, the angle is adjusted to make it.
In addition to NeoFACTORYBrand, CFPoshBrand seems to have something similar. I am not obsessed with it, so I will try to use CFPosh as well.
View detail
Fits: HARLEY-DAVIDSON
Would it be 5 stars if the quality was a little higher?
I purchased this product to produce Full Exhaust System production for YAMAHA's XV750E.
The Flange part was cut-out separately by One-offOrder, but the exhaust pipes are all made by DIY.
Exhaust pipe will start at 38φ.
Silencer wants to use a 50.1φ insert, so we will make it a little thicker somewhere.
It is still under production and is only a "plan".
The XV750E Engine is an engine with a long history, having been used in the DRAGSTAR 1100 and other models until recently, after many improvements.
Naturally, since it is a V-type two-cylinder engine, it is more difficult to handle the exhaust system than a parallel engine.
The V-bank is 75°, so I am not sure whether it should really be a collective pipe or an independent pipe.
I think that Harley and others in 45° bank are often not assembled.
FlatTRACKER's Racer is another example.
The TWIN of the 90° bank is almost certainly assembled, so we will make it a collective tube this time.
This would inevitably make it necessary to make the front and rear banks etc. longer, so the handling of the rear bank in particular would be very large and strange.
It would be meaningless to make a pipe that cannot be attached or removed, so we tried to use a joint pipe like this one.
This Joint has 38.1φ on one side and 38.1φ Pipe can be plugged in on the other side.
I think this is the best choice for those who want to joint with the same diameter.
If I had to say something, I would say that the quality of the rolled Pipe, which is the Base of Material, is not so good.
I guess it is supposed to be welded and finished, but when I first saw it, I thought, "Oh? When I first saw it, I thought, "Oh?
View detail
It doesn't tighten up … at all …;
Whether it is an individual difference or the accuracy of the product, the body is not fixed at all even if the bolt is tightened to the limit.
Really disappointed…;
View detail
Fits: HARLEY-DAVIDSON Universal
Silencer Inner Replacement
I bought this to replace the Glass Wool on Striker's Bolt on silencer that I purchased used about 5 years ago.
Since there was information that Ceramic coated Glass Wool is more durable, we wanted to use Ceramic coated Glass Wool for all of our Glass Wool if possible, but since it would be over our budget if we had the necessary amount, we initially thought of using a combination of DAYTONA's Ceramic coated Glass Wool and this product. However, the budget for the required quantity was over our budget, so we initially thought of using a combination of DAYTONA's Ceramic coated Glass Wool and this product. However, we saw information that stainless wool wrapped around the punching part improves the inner durability, so we purchased additional stainless wool, and decided to combine stainless wool, DAYTONA's Ceramic coated Glass Wool, and NeoFACTORY's Glas Wool. We decided to use a three-layer structure of stainless wool, DAYTONA's Ceramic coated Glass Wool, and NeoFACTORY's Glass Wool.
For the wrapping method, relying on the information I found on the Net, I wrapped it with moderate strength, made the inner thicker than the silencer outer, pushed it into the outer to compress the glass wool, wrapped two rounds of stainless steel wool around the punching part, wrapped the needle gold around it and fixed it in place. Then, I wrapped the punching part with Stainless wool twice and fixed it by wrapping the needle with Gold, wrapped the Ceramic coated Glass Wool from DAYTONA on top of it, and finally wrapped the Glass Wool from NeoFACTORY and fixed it by wrapping the needle with Gold to complete the Silencer. The sound was not so different from before the Silencer was replaced, partly because the condition of the inner was not so bad before the replacement.
The Glass Wool is large enough, so we decided to use 3 layers of Glass Wool, which resulted in a small amount of remaining material. I am not sure how durable it will be in the future since it has just been assembled, but I am very satisfied with the low cost of the project.
View detail
Because of cheapness?
Mokumoku when running on a pouring day.
A little fun with steam.
The color fading is great, perhaps due to the cheapness of the product.
Large might be sturdy if wrapped in a double layer, but
Space-wise, it's tough.
It would be stupid to rewind it just for the color.
As far as looks go, it will be White in a few months.
Consumables.
Color:Gray, Black, at least not this white.
I'm wondering if anyone knows of a product that says it won't fade.
I'd like to know so much ….
View detail
Fits: HARLEY-DAVIDSON Universal
It is inexpensive and appreciated when using larger quantities.
[How is it used?
When I restored my Honda XR250, a famous car from a bygone era, I found that the external exhaust system that had been installed since the day I received the car was not working properly in today's environment. Noisy Exhaust System. I purchased this product to muffle the sound as much as possible because it had become a
Was the one you received as per Image?
It was exactly as it looks, Glass Wool (GlassMatte), so it was just like Image.
How was your experience with it?
"twill weave" The fabric is not woven into the fabric like other fabrics, so it is easy to unravel, which is both a merit and a demerit.
The price is low for that reason, and it is a very nice product when you want to use it in Large quantities.
[Points to note]
If the frayed glass fibers get on your skin, they will sting, so it is best to wear disposable rubber gloves and avoid exposing your skin to the elements when working.
It is even safer if you also wear a mask to avoid inhaling through the nose or mouth, as they are easily disintegrated.
How did it compare to other products?
It is a large quantity and inexpensive, and is a great product for use in exhaust systems and other sound deadening measures.
Other items that would be helpful
Point and hang of installation
However, if the coil is left rolled and assembled without being secured, it will be unevenly distributed due to exhaust pressure or will gradually scatter during driving.
After winding the tape strongly, I think it will last a little longer if it is wound GRUGRU with fine needle goldetc. to prevent it from shattering.
[ITEMS TO BUY TOGETHER
However, it is important to prepare tools for disassembling the Silencer part of the Exhaust System (Chamber) (Drill for disassembling the Rivet stop, Riveter for assembling the Rivet stop, and Rivetc. of appropriate size). Riveter & Rivet of appropriate size).
After that, it might be a good idea to have a fine needle Gold as mentioned above.
[Opinions and requests to Manufacturer
I have purchased several times because of the quantity and low price, please continue to offer them at low prices.
View detail
Fits: HARLEY-DAVIDSON
countermeasures against heat
Exhaust pipe cooks the Right leg to about Medium rare, so I bought it for good measure.
To be honest, 2.5 LE/G is only a little better at this level.
I added a heat shield to the back of the Heat Guard, put a Ceramic washer between the fixed bolt, and put a leg cover on the human side. But it is still very hot.
My favorite to look at.
The process is not difficult, but it is tedious. If you are patient and carefully soak it in water, you can roll it up beautifully.
View detail
Fits: HARLEY-DAVIDSON Universal
Easy to use
Looks It will be dressed up.
It is also highly insulated, which improves exhaust efficiency in addition to its appearance.
It takes some ingenuity to wrap it neatly, but it has a custom feel and is satisfying.
View detail
spoon heat guard
This is the card you want. It was nice to be able to choose the size too. However, I think the price is a little high. However, compared to general inexpensive heat guards, the completeness itself is very high, so it looks luxurious. great. It is a product that I would recommend to those who watch Heat Guard. This is the card you want. It was nice to be able to choose the size too. However, I think the price is a little high. However, compared to general inexpensive heat guards, the completeness itself is very high, so it looks luxurious. great. It is a product that I would recommend to those who watch Heat Guard. View detail