Reviews
Fits: SUZUKI Address V100, SUZUKI ADDRESS V100
OEM compatible Exhaust System for professionals
I purchased this product because the OEM was getting rusty and rusty.
It seems that some people can pontificate and some can't. I was the latter.
If the Bolt is passed through the Flange on the Exhaust System side, the Bolt on the Engine side cannot be installed.
I made a mistake here by setting the Flange on the Exhaust System side to a long hole.
As you can imagine, it is thick and large, but the bracket that attaches to the side of the engine should have been a long hole. The reason is that there is a gap between the exhaust port and the exhaust pipe.
Second, the Bracket holes are not flush with the upper and lower holes. A 3mm Spacer was needed between the upper hole and the Engine.
Finally, the bolt at the rear end of the Air cleanerBox could not be installed. The reason is, as usual, the welding position of the Bracket Gap….
We had no choice but to cut it off and weld it back on again. And the heat plate attachment part (Received Nut.) The welding was done by TIG welding.
It was a labor-intensive exhaust system, but it contributed greatly to the improvement of my own technical skills.
Since a semi-automatic or TIG welder with at least 0.6mm wire is required, the work skill is considered to be PRO class.
It would be difficult for an amateur to hit an Exhaust System that has been removed.
View detail
Fits: HONDA DIO DIO AF35, HONDA DIO DIO AF34
Exhaust System for AF34/35 with the best cost performance
2stExhaust System is a product that wears out faster than expected. "2000 AF34 71CC bore up version." Although we are using this one for the
This is the third time I have purchased this iNet Exhaust System, and it is a great match. The exhaust sound is quieter than the OEM product, the exhaust pressure is good, and when the Torque is applied, it really extends well. By the way, Intake is self-improved from NORMAL by 71CC bore up, and it marks 84km/h on flat road, 78km/h up road, and 94km/h down road by using Eye Net Exhaust System.
Of course, it is not only the performance of the Exhaust System, but it is a product that can demonstrate sufficient Potential compared to other companies' products.
Moreover, the cost performance is the best, and we can't use a bad, expensive Chamber, because it is a consumable product. Therefore, I Net products are the best in terms of cost performance, so I have decided to replace the exhaust system.
It's really helpful because I can replace it without hesitation. 。 We intend to use it in the future.
The following are some of the improvements that could be made in terms of design.
(1) Stainless Steel decorative winding is not necessary (it's contrary and tacky), Black or Color.:One solid coat of Gray is fine.
As a decoration of Exhaust System ai net I think it would be cool if there was a heat-resistant PlateLogo.
I hope you will go ahead with branding because the product is good.
View detail
Fits: SUZUKI Address V100, SUZUKI ADDRESS V100
ai-net Secondary Air Pipe available Spec. OEM Type Exhaust System
Replacing the OEM made it lighter and sounded more like a 2-stroke.
We are not sure how long OEMChamber will last, and we have a motive to purchase it while we can.
Performance-wise, it is not that different from the OEM, but I am satisfied with the lighter weight and the more Chamber-like appearance.
The fixing bolt holes were correctly positioned with no gaps, and there is a secondary air pipe for the Second Type Model CE13A, so installation was no problem.
The fact that Gasket is included is also appreciated in a humble way.
View detail
Fits: SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle)
Is it not higher performance than OEM Product?
I love my 2-stroke carburetor scooter, and I clean it every 10,000 km with a pipe fnish because clogging of the exhaust system is inevitable. But I replaced the exhaust system because it was reaching the end of its service life. The Exhaust System in question is Quantity:The design of the exhaust guard has been changed for a better look. The installation is perfect with no gap at all at the bolt holes. View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
NORMAL style Exhaust System
Give up playing Normal muffler
Changed to NORMAL style Exhaust System
Installation went without a hitch and took less than 30 minutes!
I appreciated that there was no difference between NORMAL and LARGE in both volume and sound quality!
View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
The packaging was very good, but ...
The packaging was careful and secure. but some rust was visible. A little bit.
So I applied a little rust remover and it worked fine.
It needed a little work, but performance and other things don't seem to be a problem.
We feel this is a good product for those who are particular about Normal look.
View detail
Fast! Cheap! Not clever!
It looks NORMAL! The sound is quite loud (I wish it was quieter …), but it's more Torque-like than NORMAL!
The end pipe is too welded and rounded. I'm thinking of adding some pipes …
At first, I used File to make the surface, just like making a ring. LOL!
Isn't the middle Bracket supposed to be installed? I'm looking in the direction of the day after tomorrow, so I'll ignore it….
The bolt for the Protector was floating, so I removed the Protector and found that the bolt holes for the Protector were facing the wrong way, so I couldn't put the Protector back together. I was thinking of using this Heat Guard for the OEM Exhaust System, but the dimensions are not the same, so it will not fit.
If you can stand the look OR can manage it, it is quiet and fast.
View detail
Fits: SUZUKI Address V100, SUZUKI ADDRESS V100
RustRustOEM and Exchange ~.
OEM was full of Rust, so we replaced it.
Installation is a breeze (laughs).
I also appreciate that it comes with Gasket.
The design is chamber-chic, so it looks good.
I noticed during installation that it is lighter than OEM.
Replacement was a breeze.
View detail
Fits: HONDA DIO DIO AF35, HONDA DIO DIO AF34
For Refresh
I bought it for the LIVE DIOZx Refresh.
The packaging is simple, with only a protective film on the stainless steel part.
There is no Instruction Manual either, but there was no problem because I only had to replace the one that was attached.
The OEM Product was quite deteriorated and the exhaust pipe was rusty and ragged.
When you install this product and engage the engine, the sound is not heard in the state of Idling.
It was a small piece of work.
The acceleration was sluggish and it felt like it was worse than the OEM product.
The highest speed also seems to have dropped some.
It is the performance of the price, but there seems to be no problem for city riding.
Gasket is not included and is required separately.
View detail
Fits: HONDA DIO DIO AF35, HONDA DIO DIO AF34
OEM Equivalent Product is not a lie
You can run quietly with the same volume as OEM Exhaust System.
Thank you for this price.
It is recommended when you feel the problem with OEM Exhaust System.
View detail
That's cheap
I bought it and installed it, but it was new and leaking exhaust, returned it for inspection by the manufacturer And then..
About a month after admitting to an exhaust leak and sending me a new one, the good season is over!
How can you check for exhaust leaks?
I'm prepared for inferior quality because it's cheap, but it's too slow to respond
This is the second time I've used this Exhaust System, and the first time it punched a hole in me after about two years!
View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
Exactly to the NORMAL crowd!
The exhaust that corresponds to the OEMExhaust System to Bore up as it is Exhaust pipe is a little thicker and a little louder than NORMAL It's not a good idea to have a large size It's not bad for the NORMAL group I think it's a love story
The price is cheap and the Cost performance is high! There is only one drawback, the Heat Guard of Plating is attached, but it is a pressGold type There are some warped parts in the moldings that seem to be of poor precision
View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
It rusts
Used for two years It still rusts Also, exhaust leaks at Exhaust End sooner or later The quality of the iron and welding is not good The performance is not bad so it would have been nice if it could have been used for a long time, but it's a shame View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
It doesn't seem to be possible for a car with a stroke up
I thought it would be possible to install it on a vehicle that has been stroked up to 125cc! Monkey engine can go up to 125cc with only the bore ?
The packaging was in good condition, the warranty was included, and the accuracy of the Asia manufacture is better than before However, the quality of the materials still seems to be poor and there was rust floating in the thin areas of the paint
View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
Too costly!
I was riding a GORILLASpringCollection with 88cc bore up But the previous exhaust system was too noisy, so I replaced it with this product First of all, I was surprised by the solid construction of the OEM parts? Also, I was very particular about the Normal look, so I gave it 100 points I was satisfied with the sound of the NORMAL sound Anyway, it's a very, very good value for money The unbalance with the price is extraordinary View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
Quiet but inferior to the DAXExhaust System
I put a Chinese DAXExhaust System on my Bore upCUB and I like it Bore upMONKEY
I bought it expecting the same etc. effect, but the sound quality was pushy
Installation accuracy is fine and looks good
View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
If OEM looks Custom Custom!
Attached to 75cc4LMONKEY.
The texture of PlatingGuard is good, the heat resistant paint is also firm.
Welding is not beautiful, but because it plays a full role
It is not a problem privately.
And it is very quiet, even if this Level is missing, it is difficult to start up in residential area if it is a straight type Exhaust System
The warmth at midnight is not a problem..
View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
I-NET reliable
I am using it for GORILLA I purchased it because I wanted to stick to Normal look It is possible to correspond to Bore up125 It is good Missing is good You can attach without processing It is worth more than price Before going to luxury goods It is especially Recommendation for Beginner View detail
Excellent excellent item in COSPA
There is only one dissatisfaction at this stage.
Exhaust port part is getting somewhat red. But I wonder if there is a problem if I maintain it with consciousness?
I do not mind that the volume is Large.
It is necessary to devise Bracket in order to attach it to CUB, but it is not a level called processing.
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X
A comfortable bass appears
CYGNUS X installed in Taiwan 5th term.
First of all, the appearance is quite impressive with a long Oval Silencer.
This Exhaust System has a removable Baffleetc. There is no type at the exit, but it is an Exhaust System that is comfortable bass with no discomforting patter noises at the exit because it is squeezing at the exit..
Idling, fairly good bass echoes during acceleration, but running Axel is quite quiet at constant.
There was no decrease in the opening Torque, and the growth from the medium speed to the high speed improved considerably.
A little regrettable point is that the relation of the material of the Exhaust pipe, the point where the Exhaust pipe quickly burns black and the point that the positioning is slightly Large strange due to the special shape of Oval Silencer's Silencer band.
I thought that CYGNUS X equipped with this Exhaust System in the city was apparent sound, but I bought myself, but at this price this performance and sound were satisfying Large.
View detail