Reviews
Fits: HONDA Today, HONDA MONKEY, HONDA MAGNA50, HONDA JOKER Helmet, HONDA JAZZ, HONDA GYROX, HONDA GORILLA, HONDA GIORNO CREA, HONDA DIO(4Cycle), HONDA APE 50, HONDA APE 100
Standard mirror Safety Standard Corresponding Product
Installed on Ape100.
Hopefully, we wanted the OEM Mirror, but it was already discontinued, so we chose the OEM-looking MotorcyclePartsCenterNo.12 Mirror. Although it is a standard mirror, it meets safety standards and provides excellent rearward visibility.
Motorcycle mirrors are available in various types such as Mini type, Aluminum Cut-out Type, Foot shape, AeroCarbon, etc. You can choose any type of mirrors for motorcycles, but please note that any type is not OK. However, please note that not all types can be replaced.
Motorcycle mirrors are clearly standardized under the Road Trucking Vehicle Law. The details can be viewed by anyone at the Ministry of Land, Infrastructure, Transport and Tourism's Home Page, but the drawback is that there are many legal terms. To put it bluntly, it is difficult to understand. Therefore, I would like to explain what I have researched in my own way as simply as possible.
There are two points.
One is that the standards vary depending on the year of the Motorcycle.
The other is, Area." Large. The addition of the criteria for
The latest safety standards apply to all motorcycles manufactured on or after January 1, 2007, and all vehicles type-approved on or after January 1, 2005. The following is a step-by-step explanation of the safety standards for Motorcycle mirrors that meet these requirements. It is important to note that all items of the safety standards must be [Color] It is something that needs to be CLEAR.
The mirror itself can be of any shape, round, square, or hexagonal. However, the area of the mirror part of the Mirror must be at least 69?.
If you are wearing a circular mirror, it must be neither too large nor too small. It must have a diameter of at least 94mm. On the other hand, it should not be larger than 150mm.
For noncircular Mirrors, the Large size must be within 120×200mm. This is the same condition for any shape other than a circle, such as a square, oval, or hexagon. The opposite size of 200×120mm is also acceptable. The size must also be able to fit a circle with a diameter of 78mm. Mirror that is too large or too thin is not acceptable.
In addition to area and bulk size, the other important point is the installation. The following must be satisfied for the installation.
Firmly attached.
The handlebar must be installed 280mm or more outward from the center of the handlebar.
・Quantity:Pair (for Left and Right) Must have Mirror on both
Firm means solid and unbreakable, so Mirror that can be easily detached is not acceptable. Also, the center point of the Mirror mirror surface must be at least 28 cm away from the center of the handlebar. Finally, Quantity:Pair (for Left and Right) Both must have Mirror. If only one side has Mirror, it is NG. (Motorcycle with one Mirror is not acceptable except for Moped 1)
There are other rules besides area, size, and installation method.
The driver must be able to adjust it in the normal operating position.
The structure must be capable of cushioning the impact of contact with pedestrians, etc., and must not be of a type that could cause injury to pedestrians, etc.
Vehicle Quantity:Pair (for Left and Right) Ability to check traffic conditions 50m above the outer line.
The mirror shall not conform if it has significant distortion, cloudiness or cracks on the surface.
Particular attention should be paid to the fact that cracks and other problems can be NG. Even a few Cracks should be replaced before the vehicle is inspected. It should also be adjustable.
For example, a Case that is welded and fixed in such a way that it cannot be oriented; this is a no-no because it will not be adjustable.
Strictly speaking, there are a few more Mirror security standards, but the rest is too detailed. [Color] If it is clear, it is large and sturdy. However, we have talked about area, Large sturdiness, mounting, and many other criteria so far. [Color] It means that you have to be CLEAR.
So what exactly happens to Motorcycles manufactured before 2007? Motorcycles manufactured before December 31, 2006, and motorcycles whose type approval date is before December 31, 2004. but in this case, there is no stipulation on the large size (area and diameter) of the mirror surface, otherwise they will be together.
In other words, the basic safety standards are the same, but for motorcycles manufactured in 2007 and later, the requirement for a large mirror surface (69?, 120×within 200mm, or within a circle of 78mm, etc.) has been added.
Incidentally, for motorcycles manufactured before November 30, 1975, the safety standards are even different 。 However, since there are very few of them in this year, we will omit them.
You may have noticed that Motorcycle Mirror also has safety standards that are quite detailed. Then, what happens if they do not conform to the safety standards? First of all, if the vehicle does not conform to the safety standards, it will not pass the vehicle inspection. In addition, not only will the vehicle pass or fail inspection, but it will also be the subject of enforcement action as a vehicle that has been improperly modified or poorly maintained.
(Prohibition of unauthorized modification, etc.)
Article 99-2 No person shall, with respect to a motor vehicle for which a valid automobile inspection certificate has been issued pursuant to the provision of Paragraph 1 of Article 58 or a non-inspected mini motor vehicle for which notification of use has been given pursuant to the provision of Paragraph 1 of Article 97-3, perform any alterations to the vehicle or its parts, installation or removal of equipment or any other similar acts, which would cause the vehicle or its parts to conform to safety standards. 。 Citation:Article 99-2 of the Road Trucking Vehicle Law
If the vehicle is tampered with, the penalty is imprisonment for not more than 6 months or 300,000 yen, and if the vehicle is poorly maintained (e.g., tail lights), the penalty is one point and 6,000 yen in penalty gold.
In practice, it seems that Mirror does not often face enforcement action, but you should be aware that there is a good chance that you will be caught for violations or illegality. (If you are caught, you cannot complain.) And of course, the same applies to motorcycles under 250cc without inspection.
Especially, the size and the area of the Mirror are likely to be caught by the security standard, if you want to add a Mirror with good parenthesis or a slim Mirror,
The area must have an area of 69?.
Circle with a diameter of 78mm must be concealed.
For circular Mirror, the diameter must be between 94mm and 150mm.
In the case of a motorcycle manufactured in 2007, the above three points are particularly important. The most important thing is to be able to see the rear of the vehicle.
I hope you find the above helpful.
For details, please refer to the Homepage of the Ministry of Land, Infrastructure, Transport and Tourism.
http://www.mlit.go.jp/jidosha/jidosha_fr7_000007.html
View detail
Fits: HONDA Today, HONDA MONKEY, HONDA MAGNA50, HONDA JOKER Helmet, HONDA JAZZ, HONDA GYROX, HONDA GORILLA, HONDA GIORNO CREA, HONDA DIO(4Cycle), HONDA APE 50, HONDA APE 100
Cheapness is appealing. The picture is good enough.
Installed on a HondaApe100.
Since the OEM Mirror was discontinued, we selected MotorcyclePartsCenter's No. 12 Mirror from among the less glamorous ones that looked similar to the OEM.
The result was a good MATCH for the overall atmosphere of the car body.
I am satisfied with the Mirror's copying.
The construction is commensurate with the price, so we recommend this Mirror to those who, to put it bluntly, are looking for cheapness.
View detail
Fits: KAWASAKI ESTRELLARSCustom, KAWASAKI ESTRELLARS
Stretched well.
I bought Tucker to reupholster my old motorbike, and I didn't have the budget to spend tens of thousands of dollars on OEM or custom-made stuff, so I decided to do it myself at a low price. The thickness and texture of the seat is not as good as OEM, but I regretted that it looked cheap when I received it, but after I stretched it, it looks beautiful. The ride quality is also better. Even if I applied anti-slip coating, after applying the brake, it was gapping in front of the car but now it is stable and easy to drive without sliding. The material that looked cheap is now shiny and beautiful. I've never done any DIY before, so I'm a beginner and I'm too lazy to watch YouTube, but I can get by even if I do it haphazardly. Now I'm planning to reupholster it again and put Nylon in it for rain protection and Gel Zab under the Seat for long distance protection. View detail
Good visibility!
I installed this together with my Ninja 250SL that I modified for Gymkhana when I converted it to NAKED. The best value License Plate Bracket and Reflector are available in quantity.:I am very happy with the Set. The visibility is very good as it claims to be equipped with many high brightness LEDs. The wiring is also very well made, so it is a recommendation! View detail
cylinder piston group
Good afternoon, I received it today, I like everything. The quality is up to par. Delivery ahead of time. Thanks guys. They put a full set of gaskets, a finger View detail
Fits: YAMAHA VINO, YAMAHA VINO
It's Recommendation because of the quality!
My brother-in-law's Scooter (VINO) Seat was torn, so I reupholstered it for him. The fabric stretches well so it is easy to pull and put up! It is also durable, so it doesn't hurt at all even if I get in and out of the car every day! It's a recommendation because it makes the dirty Seat look like new! View detail
Poof, a new car!
While replacing and repairing the keyhole of my father's APRIO, which was the victim of an attempted theft, I also replaced the cowl! This is a very large cowl! The old OEM cowl was reborn as a shiny new cowl, and it feels like a new car! If you look closely, you can see that there was some dust in the cowl and the mounting holes did not fit slightly, but it is just a matter of widening the holes and doing some other simple things! The material of the Cowl is not Pe LePera, but the same level of strength as OEM! This is really a Recommendation! View detail
Fits: YAMAHA SEROW225, YAMAHA SEROW225
The fabric is slightly thicker than the company's SY-107Type.
[How is it used?
We decided to reupholster the seat of a 1997 SEROW225 WE that we acquired two years ago. The seat had originally deteriorated, but due to playing in the mountains, etc., the surface skin had reached its limit.
I searched Webike for Seat fabric to reupholster. MotorcyclePartsCenter. There were only two products available, both in the same color scheme as the OEMSeat type, and I was torn between buying one or the other, so I decided to buy both because they were cheaper.
This time in Webike's product introduction section. "High quality" It was described as (Price at time of purchase:3,150 yen) This will be a review of Seat fabrics in the "Seat fabrics" section.
How did you like it?
As I said above. SY-107V (High Quality Type) When SY-107. (Standard Type) The Standard Type was actually used for the Seat reupholstery work, as we purchased the Seat fabric at the same time as the Standard Type.
If I write honestly. If you weren't told, you couldn't tell them apart just by looking at them." and if you touch it, you'll find that the high quality Type is more like A little thicker?" It was like
Well, the price of Standard Type is 2,830 yen and High Quality Type is 3,150 yen, and the difference is only 320 yen.
When it was listed in the introduction section. The higher one is shiny. The cheaper one is WITHOUT Gloss. However, the actual product arrived in a semi-glossy condition, and although it is hard to tell the difference just by looking at the product, the thickness of the fabric is enough to make the product look like a "good" product. High-Quality Type may last a little longer.
I would like to replace the surface skin of my current Standard Type with this product when it becomes useless.
How did it compare to other products?
Compared to the Standard Type SY107, which I purchased at the same time, if there is a price difference of 320 yen, would it be better to purchase this product, SY107V?
Incidentally, as of February 2024, YamahaOEM's Seat assembly. is no longer available, but you can still purchase it at Seat CoverSingle Item! (17,380 yen) 。
Even though the fabric is a little thicker than the Standard Type, it is not as good as YamahaOEM's Seat fabric, but considering the price, I think this product is well worth purchasing.
[Points to note]
When reupholstering, if the Tucker is driven in halfway, there is a risk that the fabric will break from there.
Front and back of the Seat are loosely secured to the Quantity:Pair (for Left and Right) When pasting the "Beauty" sponge, it should be pasted along the "Seat sponge" without wrinkles to make it beautiful.
Other items that would be helpful
The deciding factor in the purchase
I usually post PartsReview with hanghang and use my WebikePoints that I have saved up, so I can buy them at Webike. SEROW225. The only two types of Seat fabric for reupholstery for the new car were available in MotorcyclePartsCenter's lineup.
(Seat fabric from Universal Product was not an option because we wanted to use the same color pattern as the OEM.)
[How is it used?
I enjoy all kinds of Situations, from everyday city driving to mountain play.
【Included Parts:presence or absence】.
Seat CoverQuantity:1 pc. only, this one also did not have Tandem belt, 1995 (4JG2) From SEROW225 W onward, Tandem belt is not included even in OEM, so there is no problem.
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
Vinyl bag with large diameter to prevent flooding of the seat sponge (Large sturdy with Vinyl bags for Garbage collection) is different for each person, so those who use it should purchase it while they are at it.
In my case, I do not use Vinyl, but I apply SiliconCoking agent to the seams on the reverse side of the Seat fabric to prevent water from seeping through the seams.
Opinions and requests to Manufacturer.
I honestly think it would be better to use this product as a 1 pc system. I would like to continue to use Lineup, but I am thankful that I have a choice.
View detail
Usage is limited.
AA01 type square eye SUPER CUB Used for the following
NeutralIndicator in Speedometer (×1pc.)
Blinker indicator (×1pc.)
Back light of the Meter itself (×Quantity:2pc. Set)
You may not want to use it as a back light as the previous reviewer wrote. It is too dark.
(My AA01CUB has a Quantity on the Back light.:Pair (for Left and Right) Quantity:2pc. Set use, so it is not unusable. It is still dark.)
NeutralIndicator and Blinker indicator can be used as a Lamp.
We have been using it for one year and have had no malfunctions. For the price, I think I got my money's worth.
View detail
Wearable feeling ◎ Made in Taiwan! Made in Taiwan!
I bought this for when I am going to take my friend for a ride or when I go for a walk in the neighborhood with my CUB90! The paint job is beautiful and the Matte Black color is very cool! It is much more comfortable and better looking than the half caps sold at home centers for around 2000 yen! View detail
Discontinued and used here
Cut to the same Size to make and use. View detail
Very good complete set of plastic
About quality and texture
A high-quality plastic kit for the whole scooter, absolutely all the fasteners are as in the original parts, except for a few points, it is necessary to drill holes for installing a small beak on the main beak, as well as a hole for the output of the spoiler brake light wire on the right sidewall, otherwise everything is fine, full compatibility and easy installation without adjustment and modifications
About the feeling of use
After installation, only positive emotions, absolutely good plastic, perfect fit and beautifully painted, no disappointments, in the photo you can see this kit after unpacking, only the gas tank cap was not included in the frame
Products to buy together
Full set of painted plastic, no additional purchases required, everything fits perfectly
Difficulty of installation
Easy installation, instead of old plastic, all original fasteners are 100% compatible
Cost performance and comparison with other products
Low cost of a plastic kit, but high shipping costs, because this product takes up a large amount of space
About shipping and packaging
Reliable packaging in a box and in a soft material that does not scratch the plastic coating
Any concerns, cautions, or advice when purchasing
Please note that there are holes that are missing on this product, 3 holes need to be drilled ------------------------------ ---------------------------- About Quality and Texture A high -quality set of plastic for the entire scooter, absolutely all the fasteners as in original details, except for several points, it is necessary to drill holes to install a small beak on the main beak, as well as a hole for the output of the Stopsignal of the spoiler at the right sidewall, all the other is fine, complete compatibility and easy installation without fitting and modifications ABOUT THE FEELING OF USE After installation, only positive emotions, absolutely good plastic, perfectly suitable and beautifully painted, no disappointment, in the photo you can see this set after unpacking, only the gas tank cover did not get into the frame Products to Buy Together A full compartment of painted plastic, additional purchases are not required, everything is perfect Difficulty of Installation Light installation, instead of old plastic, all original fasteners are compatible 100% COST Performance and Comparison with Other Products Low cost of a set of plastic, but high delivery cost, TC This product occupies a large amount of space ABOUT SHIPPing and PACKAGING Reliable packaging in a box and soft material that does not scratch the coating of plastic Any Concerns, Countions, or Advice When Purchacing Keep in mind that refinements are needed in the form of holes that are not enough on this product, 3 holes must be drilled Powered by Google Translator
View detail
Seat NBS JAPAN
My Honda monkey did not have the original seat when I bought it. Outwardly, it looked great, but the ride was somewhat uncomfortable. The original seat could not be purchased, so I decided to try this replica. There are no problems with the quality of the materials, over time everything will be clear, while everything is fine. By design, everything is fine, soundly, there were no problems during installation. On my Honda monkey, when I bought it, there was not an original seat. Outwardly, it looked great, but it was somewhat uncomfortable to drive. The original seat could not be purchased, so I decided to try this replica. There are no problems with the quality of materials, over time everything will be clear, while it is normal. By design, everything is fine, soundly, there were no problems during installation. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
APE100 footpeg replacement
I used it to replace the footpeg on my APE100. It looks much better now. The screws that hold it in place seemed to come off easily, so I applied Screw lock and installed it. Installation was easy. View detail
I've had it for 8 years.
I installed it with Small machining and … what a surprise, I've had it for 8 years in its current state.
I've kept most of them covered with Cover, but even so, they've lasted surprisingly long; if they were OEM, they would be a shadow of their former selves.
As expected, recently it has become difficult to remove dirt and Black Mold grows under the Cover, but each time I put Dustcloth soaked in kitchen bleach and bleach it. This is a very good way to revive it.
For persistent stains, such as those from shoe hits, use Micro compound. In moderation." Taking.
I know it's cheap, so I should buy a new one, but I'm using it after modifying it a bit, so it's a hassle to replace it and modify it again, and I'm quite attached to it.
What's a bit of a surface white is the color loss and the decrease in transparency.
I recently noticed that it was originally Beige-ish. That cheesy color. was nearly bright White from sun exposure & fading over time.
The transparency is much less and no longer shows through to the Levels close to OEM.
The surface also remains smooth without any MicroCracks.
This made it even harder to replace them.
I heard that some lots of this product have a round BALI in the Center section (← did they change factories along the way?). I heard that some lots of this product have a round BALI in the Center part (did they change the factory in the process?), but perhaps the current distributed product has been solved by eliminating the BALI.
I can recommend it quite strongly because it is semi-durable and becomes more luxurious with each use (laughs).
View detail
Fits: YAMAHA TW225, YAMAHA BRONCO225, YAMAHA SEROW225 WE, YAMAHA SEROW225 W, YAMAHA SEROW225S, YAMAHA SEROW225, YAMAHA TRICKER XG250 TRICKER
neither too much nor too little
SEROW225 WE (5MP) Purchased as a front brake disc for
I wondered how it would be at half the price of OEM, but the installation, dimensions, Material, Brake effectiveness, Brake Touch, everything was the same as OEM.
Originally, the OEM disc itself was just a cheap-looking piece of stainless steel plate that was cut out and beveled, so the appearance of this product feels perfectly fine.
It is really helpful to have out-of-print Motorcycle Parts at affordable prices.
I would use it again.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
It's a crisp sound.
Disc Grinder/Impactetc., Footpeg Drill and other preparations.
If you are familiar with consolidated Gold objects, this is a great deal.
I chose it for the best adjustment of Material quality, price and piping routing.
View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA APE 100
Cheap and great.
Cheap!
Very good considering the price.
View detail
Fits: HONDA SUPER CUB110, SUZUKI LETS5, SUZUKI LETS5G, SUZUKI Address50, SUZUKI Address50, SUZUKI LETS4, SUZUKI LETS4
Blue color is cool!
Because the color of the valve part is blue, if the light is not turned on when the car is parked, the entire car will be slightly blue.
It's so cool, it gives a futuristic look! Of course, it is a normal color when lit.
It's affordable and good looking, so it's a RECOMMENDATION! It's cheap, but it works!
View detail
Fits: HONDA LEAD110(EX), SUZUKI LETS(4Cycle), SUZUKI LETS4Basket, SUZUKI LETS5, SUZUKI LETS5G, SUZUKI Address50, SUZUKI Address50
Purchased with another Valve
It was too cheap. "Ha Gap. I bought a blue Valve for when I had a cold …
It's well made and I keep it as Spare after I'm done with it lol.
View detail