Reviews
Fits: KAWASAKI ESTRELLARSCustom, KAWASAKI ESTRELLARS
Stretched well.
I bought Tucker to reupholster my old motorbike, and I didn't have the budget to spend tens of thousands of dollars on OEM or custom-made stuff, so I decided to do it myself at a low price. The thickness and texture of the seat is not as good as OEM, but I regretted that it looked cheap when I received it, but after I stretched it, it looks beautiful. The ride quality is also better. Even if I applied anti-slip coating, after applying the brake, it was gapping in front of the car but now it is stable and easy to drive without sliding. The material that looked cheap is now shiny and beautiful. I've never done any DIY before, so I'm a beginner and I'm too lazy to watch YouTube, but I can get by even if I do it haphazardly. Now I'm planning to reupholster it again and put Nylon in it for rain protection and Gel Zab under the Seat for long distance protection. View detail
Fits: YAMAHA VINO, YAMAHA VINO
It's Recommendation because of the quality!
My brother-in-law's Scooter (VINO) Seat was torn, so I reupholstered it for him. The fabric stretches well so it is easy to pull and put up! It is also durable, so it doesn't hurt at all even if I get in and out of the car every day! It's a recommendation because it makes the dirty Seat look like new! View detail
Cowl mounting holes do not fit
Paint quality is good. It makes it look like a new car! I had to force it on with Tie Wrap or re-drill the holes … I think it may have been an individual mistake, but … I drilled the holes with a Drill and installed it. If you can install it, you will be supremely satisfied. View detail
Poof, a new car!
While replacing and repairing the keyhole of my father's APRIO, which was the victim of an attempted theft, I also replaced the cowl! This is a very large cowl! The old OEM cowl was reborn as a shiny new cowl, and it feels like a new car! If you look closely, you can see that there was some dust in the cowl and the mounting holes did not fit slightly, but it is just a matter of widening the holes and doing some other simple things! The material of the Cowl is not Pe LePera, but the same level of strength as OEM! This is really a Recommendation! View detail
fitment issues
I was excited to recieve this poduct. There are a few fitment issues with these plastics for my af27 dio. The front piece the 4 bolts on the back side only two line up the other two are so far off would need to enlarge holes to make it work. The top headlight piece does not fit well pops out on the one side and on the middle. The rear pieces seems to fit alittle better but not the best. View detail
Fits: YAMAHA SEROW225, YAMAHA SEROW225
The fabric is slightly thicker than the company's SY-107Type.
[How is it used?
We decided to reupholster the seat of a 1997 SEROW225 WE that we acquired two years ago. The seat had originally deteriorated, but due to playing in the mountains, etc., the surface skin had reached its limit.
I searched Webike for Seat fabric to reupholster. MotorcyclePartsCenter. There were only two products available, both in the same color scheme as the OEMSeat type, and I was torn between buying one or the other, so I decided to buy both because they were cheaper.
This time in Webike's product introduction section. "High quality" It was described as (Price at time of purchase:3,150 yen) This will be a review of Seat fabrics in the "Seat fabrics" section.
How did you like it?
As I said above. SY-107V (High Quality Type) When SY-107. (Standard Type) The Standard Type was actually used for the Seat reupholstery work, as we purchased the Seat fabric at the same time as the Standard Type.
If I write honestly. If you weren't told, you couldn't tell them apart just by looking at them." and if you touch it, you'll find that the high quality Type is more like A little thicker?" It was like
Well, the price of Standard Type is 2,830 yen and High Quality Type is 3,150 yen, and the difference is only 320 yen.
When it was listed in the introduction section. The higher one is shiny. The cheaper one is WITHOUT Gloss. However, the actual product arrived in a semi-glossy condition, and although it is hard to tell the difference just by looking at the product, the thickness of the fabric is enough to make the product look like a "good" product. High-Quality Type may last a little longer.
I would like to replace the surface skin of my current Standard Type with this product when it becomes useless.
How did it compare to other products?
Compared to the Standard Type SY107, which I purchased at the same time, if there is a price difference of 320 yen, would it be better to purchase this product, SY107V?
Incidentally, as of February 2024, YamahaOEM's Seat assembly. is no longer available, but you can still purchase it at Seat CoverSingle Item! (17,380 yen) 。
Even though the fabric is a little thicker than the Standard Type, it is not as good as YamahaOEM's Seat fabric, but considering the price, I think this product is well worth purchasing.
[Points to note]
When reupholstering, if the Tucker is driven in halfway, there is a risk that the fabric will break from there.
Front and back of the Seat are loosely secured to the Quantity:Pair (for Left and Right) When pasting the "Beauty" sponge, it should be pasted along the "Seat sponge" without wrinkles to make it beautiful.
Other items that would be helpful
The deciding factor in the purchase
I usually post PartsReview with hanghang and use my WebikePoints that I have saved up, so I can buy them at Webike. SEROW225. The only two types of Seat fabric for reupholstery for the new car were available in MotorcyclePartsCenter's lineup.
(Seat fabric from Universal Product was not an option because we wanted to use the same color pattern as the OEM.)
[How is it used?
I enjoy all kinds of Situations, from everyday city driving to mountain play.
【Included Parts:presence or absence】.
Seat CoverQuantity:1 pc. only, this one also did not have Tandem belt, 1995 (4JG2) From SEROW225 W onward, Tandem belt is not included even in OEM, so there is no problem.
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
Vinyl bag with large diameter to prevent flooding of the seat sponge (Large sturdy with Vinyl bags for Garbage collection) is different for each person, so those who use it should purchase it while they are at it.
In my case, I do not use Vinyl, but I apply SiliconCoking agent to the seams on the reverse side of the Seat fabric to prevent water from seeping through the seams.
Opinions and requests to Manufacturer.
I honestly think it would be better to use this product as a 1 pc system. I would like to continue to use Lineup, but I am thankful that I have a choice.
View detail
Cheap, thin, but usable.
[How is it used?
This 1997 SEROW225WE, which I acquired two years ago, was purchased by an acquaintance of mine six years ago, and I had done a fair amount of repair work on it when I bought it six years ago.
After receiving it the year before last, we prioritized restoration from a functional point of view, but the Seat Cover, which was originally on the verge of unraveling because it had been used for playing in the mountains during that time, had reached its limit.
I searched Webike for Seat fabric to reupholster. MotorcyclePartsCenter. There were only two products available, both in the same color scheme as the OEMSeat type, and I was torn between buying one or the other, so I decided to buy both because they were cheaper.
This time The cheapest one (price at time of purchase:2,830 yen) Review of.
How was your experience with it?
When it was listed in the product section. The higher one is shiny. The cheaper one is WITHOUT Gloss. The actual product that arrived was semi-glossy and I could not tell the difference just by looking at them. When I touched them, I found that the more expensive one (SY107V) had slightly thicker fabric and seemed to last longer than the less expensive one (SY107).
How did it compare to other products?
Incidentally, as of February 2024, YamahaOEM's Seat assembly. is no longer available, but is still available in the Seat CoverSingle Item (17,380 yen).
As expected, the fabric is thinner and less durable than YamahaOEM's Seat fabric, but at this price, it makes enough sense.
[Points to note]
As mentioned above, the Seat fabric is thin, so if the Tucker is driven in halfway during reupholstering, there is a risk that the fabric will break from the Seat Base.
Front and back of the Seat are loosely secured to the Quantity:Pair (for Left and Right) When pasting the "Beauty" sponge, it should be pasted along the "Seat sponge" without wrinkles to make it beautiful.
Other items that would be helpful
The deciding factor in the purchase
I usually post PartsReview with hanghang and use my WebikePoints that I have saved up, so I can buy them at Webike. SEROW225. The only two types of Seat fabric for reupholstery for the new car were available in MotorcyclePartsCenter's lineup.
(Universal Product's Seat fabric was not an option because we wanted to use the same color pattern as the OEM.)
[How is it used?
It is used in various Situations from street riding to mountain play.
【Included Parts:presence or absence】.
Only one Seat Cover, no Tandem belt was attached. To begin with, Tandem belt has not been attached to SEROW225W since 1995 (4JG2), even OEM, so there is no problem.
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker, a slightly larger version of Stapler. and short-legged core.
Vinyl bags of Large size (Vinyl bags for Garbage collection and Large sturdy) are available for each person as a measure against flooding of the seat sponge, so those who use these bags should purchase them while they are at it.
In my case, I do not use Vinyl, but I apply SiliconCoking agent to the seams on the reverse side of the Seat fabric to prevent water from seeping through the seams.
Opinions and requests to Manufacturer.
In these days of daily whispers of skyrocketing prices, it is very nice to be able to get Seat fabric at this price.
Please keep up the lineup continuity.
View detail
Very good complete set of plastic
About quality and texture
A high-quality plastic kit for the whole scooter, absolutely all the fasteners are as in the original parts, except for a few points, it is necessary to drill holes for installing a small beak on the main beak, as well as a hole for the output of the spoiler brake light wire on the right sidewall, otherwise everything is fine, full compatibility and easy installation without adjustment and modifications
About the feeling of use
After installation, only positive emotions, absolutely good plastic, perfect fit and beautifully painted, no disappointments, in the photo you can see this kit after unpacking, only the gas tank cap was not included in the frame
Products to buy together
Full set of painted plastic, no additional purchases required, everything fits perfectly
Difficulty of installation
Easy installation, instead of old plastic, all original fasteners are 100% compatible
Cost performance and comparison with other products
Low cost of a plastic kit, but high shipping costs, because this product takes up a large amount of space
About shipping and packaging
Reliable packaging in a box and in a soft material that does not scratch the plastic coating
Any concerns, cautions, or advice when purchasing
Please note that there are holes that are missing on this product, 3 holes need to be drilled ------------------------------ ---------------------------- About Quality and Texture A high -quality set of plastic for the entire scooter, absolutely all the fasteners as in original details, except for several points, it is necessary to drill holes to install a small beak on the main beak, as well as a hole for the output of the Stopsignal of the spoiler at the right sidewall, all the other is fine, complete compatibility and easy installation without fitting and modifications ABOUT THE FEELING OF USE After installation, only positive emotions, absolutely good plastic, perfectly suitable and beautifully painted, no disappointment, in the photo you can see this set after unpacking, only the gas tank cover did not get into the frame Products to Buy Together A full compartment of painted plastic, additional purchases are not required, everything is perfect Difficulty of Installation Light installation, instead of old plastic, all original fasteners are compatible 100% COST Performance and Comparison with Other Products Low cost of a set of plastic, but high delivery cost, TC This product occupies a large amount of space ABOUT SHIPPing and PACKAGING Reliable packaging in a box and soft material that does not scratch the coating of plastic Any Concerns, Countions, or Advice When Purchacing Keep in mind that refinements are needed in the form of holes that are not enough on this product, 3 holes must be drilled Powered by Google Translator
View detail
Seat NBS JAPAN
My Honda monkey did not have the original seat when I bought it. Outwardly, it looked great, but the ride was somewhat uncomfortable. The original seat could not be purchased, so I decided to try this replica. There are no problems with the quality of the materials, over time everything will be clear, while everything is fine. By design, everything is fine, soundly, there were no problems during installation. On my Honda monkey, when I bought it, there was not an original seat. Outwardly, it looked great, but it was somewhat uncomfortable to drive. The original seat could not be purchased, so I decided to try this replica. There are no problems with the quality of materials, over time everything will be clear, while it is normal. By design, everything is fine, soundly, there were no problems during installation. View detail
I've had it for 8 years.
I installed it with Small machining and … what a surprise, I've had it for 8 years in its current state.
I've kept most of them covered with Cover, but even so, they've lasted surprisingly long; if they were OEM, they would be a shadow of their former selves.
As expected, recently it has become difficult to remove dirt and Black Mold grows under the Cover, but each time I put Dustcloth soaked in kitchen bleach and bleach it. This is a very good way to revive it.
For persistent stains, such as those from shoe hits, use Micro compound. In moderation." Taking.
I know it's cheap, so I should buy a new one, but I'm using it after modifying it a bit, so it's a hassle to replace it and modify it again, and I'm quite attached to it.
What's a bit of a surface white is the color loss and the decrease in transparency.
I recently noticed that it was originally Beige-ish. That cheesy color. was nearly bright White from sun exposure & fading over time.
The transparency is much less and no longer shows through to the Levels close to OEM.
The surface also remains smooth without any MicroCracks.
This made it even harder to replace them.
I heard that some lots of this product have a round BALI in the Center section (← did they change factories along the way?). I heard that some lots of this product have a round BALI in the Center part (did they change the factory in the process?), but perhaps the current distributed product has been solved by eliminating the BALI.
I can recommend it quite strongly because it is semi-durable and becomes more luxurious with each use (laughs).
View detail
Fits: HONDA Today, HONDA Today, HONDA Giorno, HONDA DIO(4Cycle), HONDA DIO(4Cycle)
How durable is it?
Restore TODAY after many years of neglect, 4 years.
Will the Fork Boots break off from age?
I couldn't cut it out of my mind…
I noticed a tear and replaced it.
I thought OEM would be better in terms of texture. I thought so.
How long do you think it will last as a consumable?
I would like to verify this.
The protrusion for fixing the drum brake on the LeftFork was quite fiddly.
View detail
License bolt Green color
Beautiful. I like the color.
It was easy to install.
View detail
The price
Tucker required as a Large premise. not just a product to be covered.
Good fabric look and feel.
I'm not sure about the durability of this product.
View detail
So so
I guess it's okay…
The hole position is different or…
Fitting is subtle des…
It is good if you are not particular.
View detail
Nice very Super cub50........................................... View detail
คุณภาพเหมาะสมราคา งานดี แข็งแรง และเข้ากับตัวรถใด้ดี ใส่ใด้ทั้ง Honda and yamaha View detail
Great spoiler to replace the original
About quality and texture
Excellent quality of molding and processing of plastic, all corners are made indistinguishable from the original, perfect mounting holes, fits and fastens well to a standard mounting plate
About the feeling of us
The spoiler was pre-painted in white standard color, there was no burr on the surface, the plastic and coating are easy to process, the quality is identical to the factory, even the paint from the factory looks very good, but I needed a different color
Products to buy together
This kit only comes with a plastic spoiler, if you are looking for a replacement plastic part, then this product is for you.
Difficulty of installation
Easy installation in a standard place, instead of a damaged factory part, all mounting holes are identical and perfectly match the mounting plate
Cost performance and comparison with other products
The price is pleasantly surprising, the original spare part is much more expensive, however, the quality corresponds not only to the price, but also to expectations
About shipping and packaging
Packed in soft packaging, but Webike additionally packed and protected the item from damage during transportation
Any concerns, cautions, or advice when purchasing
Please note that there are only two kinds of color, black and white, the parts are factory painted with a good coating, so if you need a different color, then be prepared for additional painting -------------- -------------------------------------------------- About Quality and Texture Excellent quality of casting and processing plastic, all angles are indistinguishable from the original, ideal fasteners, a standard fastener is well suited and fixed ABOUT THE FEELING of US The spoiler was previously painted from a white standard color, no burrs were on the surface, plastic and coating are easily processed, the quality is identical to the factory, even the paint from the plant looks very good, but I needed a different color Products to Buy Together Only a plastic spoiler is delivered in the kit, if you are looking for a replacement of a plastic part, then this product is for you Difficulty of Installation Easy installation in a standard place, instead of a spoiled factory part, all fasteners are identical and perfectly suitable for a reckoning plate COST Performance and Comparison with Other Products The price is pleasantly surprising, the original spare part is more expensive, however, the quality corresponds not only to the price, but also to expectations ABOUT SHIPPing and PACKAGING Packed in soft packaging, but Webike additionally packed and protected the part from damage during Any Concerns, Countions, Or Advice When Purchacing Pay attention to the fact that only two types of color, black and white, the details are painted at the factory with a good coating, so if you need a different color, then be prepared for additional painting Powered by Google Translator
View detail
Leg shield LITTLE CUB
I bought this leg shield for SUPER CUB knowing that it needs some modification because of its low price. I installed it by shaving only the part near the handle. I was disappointed with the position of the bolt fixing holes at the foot. I wonder if this is a defect of only the product I received? View detail