Reviews
Fits: KAWASAKI ESTRELLARSCustom, KAWASAKI ESTRELLARS
Stretched well.
I bought Tucker to reupholster my old motorbike, and I didn't have the budget to spend tens of thousands of dollars on OEM or custom-made stuff, so I decided to do it myself at a low price. The thickness and texture of the seat is not as good as OEM, but I regretted that it looked cheap when I received it, but after I stretched it, it looks beautiful. The ride quality is also better. Even if I applied anti-slip coating, after applying the brake, it was gapping in front of the car but now it is stable and easy to drive without sliding. The material that looked cheap is now shiny and beautiful. I've never done any DIY before, so I'm a beginner and I'm too lazy to watch YouTube, but I can get by even if I do it haphazardly. Now I'm planning to reupholster it again and put Nylon in it for rain protection and Gel Zab under the Seat for long distance protection. View detail
Fits: YAMAHA VINO, YAMAHA VINO
It's Recommendation because of the quality!
My brother-in-law's Scooter (VINO) Seat was torn, so I reupholstered it for him. The fabric stretches well so it is easy to pull and put up! It is also durable, so it doesn't hurt at all even if I get in and out of the car every day! It's a recommendation because it makes the dirty Seat look like new! View detail
Poof, a new car!
While replacing and repairing the keyhole of my father's APRIO, which was the victim of an attempted theft, I also replaced the cowl! This is a very large cowl! The old OEM cowl was reborn as a shiny new cowl, and it feels like a new car! If you look closely, you can see that there was some dust in the cowl and the mounting holes did not fit slightly, but it is just a matter of widening the holes and doing some other simple things! The material of the Cowl is not Pe LePera, but the same level of strength as OEM! This is really a Recommendation! View detail
Fits: YAMAHA SEROW225, YAMAHA SEROW225
The fabric is slightly thicker than the company's SY-107Type.
[How is it used?
We decided to reupholster the seat of a 1997 SEROW225 WE that we acquired two years ago. The seat had originally deteriorated, but due to playing in the mountains, etc., the surface skin had reached its limit.
I searched Webike for Seat fabric to reupholster. MotorcyclePartsCenter. There were only two products available, both in the same color scheme as the OEMSeat type, and I was torn between buying one or the other, so I decided to buy both because they were cheaper.
This time in Webike's product introduction section. "High quality" It was described as (Price at time of purchase:3,150 yen) This will be a review of Seat fabrics in the "Seat fabrics" section.
How did you like it?
As I said above. SY-107V (High Quality Type) When SY-107. (Standard Type) The Standard Type was actually used for the Seat reupholstery work, as we purchased the Seat fabric at the same time as the Standard Type.
If I write honestly. If you weren't told, you couldn't tell them apart just by looking at them." and if you touch it, you'll find that the high quality Type is more like A little thicker?" It was like
Well, the price of Standard Type is 2,830 yen and High Quality Type is 3,150 yen, and the difference is only 320 yen.
When it was listed in the introduction section. The higher one is shiny. The cheaper one is WITHOUT Gloss. However, the actual product arrived in a semi-glossy condition, and although it is hard to tell the difference just by looking at the product, the thickness of the fabric is enough to make the product look like a "good" product. High-Quality Type may last a little longer.
I would like to replace the surface skin of my current Standard Type with this product when it becomes useless.
How did it compare to other products?
Compared to the Standard Type SY107, which I purchased at the same time, if there is a price difference of 320 yen, would it be better to purchase this product, SY107V?
Incidentally, as of February 2024, YamahaOEM's Seat assembly. is no longer available, but you can still purchase it at Seat CoverSingle Item! (17,380 yen) 。
Even though the fabric is a little thicker than the Standard Type, it is not as good as YamahaOEM's Seat fabric, but considering the price, I think this product is well worth purchasing.
[Points to note]
When reupholstering, if the Tucker is driven in halfway, there is a risk that the fabric will break from there.
Front and back of the Seat are loosely secured to the Quantity:Pair (for Left and Right) When pasting the "Beauty" sponge, it should be pasted along the "Seat sponge" without wrinkles to make it beautiful.
Other items that would be helpful
The deciding factor in the purchase
I usually post PartsReview with hanghang and use my WebikePoints that I have saved up, so I can buy them at Webike. SEROW225. The only two types of Seat fabric for reupholstery for the new car were available in MotorcyclePartsCenter's lineup.
(Seat fabric from Universal Product was not an option because we wanted to use the same color pattern as the OEM.)
[How is it used?
I enjoy all kinds of Situations, from everyday city driving to mountain play.
【Included Parts:presence or absence】.
Seat CoverQuantity:1 pc. only, this one also did not have Tandem belt, 1995 (4JG2) From SEROW225 W onward, Tandem belt is not included even in OEM, so there is no problem.
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
Vinyl bag with large diameter to prevent flooding of the seat sponge (Large sturdy with Vinyl bags for Garbage collection) is different for each person, so those who use it should purchase it while they are at it.
In my case, I do not use Vinyl, but I apply SiliconCoking agent to the seams on the reverse side of the Seat fabric to prevent water from seeping through the seams.
Opinions and requests to Manufacturer.
I honestly think it would be better to use this product as a 1 pc system. I would like to continue to use Lineup, but I am thankful that I have a choice.
View detail
Very good complete set of plastic
About quality and texture
A high-quality plastic kit for the whole scooter, absolutely all the fasteners are as in the original parts, except for a few points, it is necessary to drill holes for installing a small beak on the main beak, as well as a hole for the output of the spoiler brake light wire on the right sidewall, otherwise everything is fine, full compatibility and easy installation without adjustment and modifications
About the feeling of use
After installation, only positive emotions, absolutely good plastic, perfect fit and beautifully painted, no disappointments, in the photo you can see this kit after unpacking, only the gas tank cap was not included in the frame
Products to buy together
Full set of painted plastic, no additional purchases required, everything fits perfectly
Difficulty of installation
Easy installation, instead of old plastic, all original fasteners are 100% compatible
Cost performance and comparison with other products
Low cost of a plastic kit, but high shipping costs, because this product takes up a large amount of space
About shipping and packaging
Reliable packaging in a box and in a soft material that does not scratch the plastic coating
Any concerns, cautions, or advice when purchasing
Please note that there are holes that are missing on this product, 3 holes need to be drilled ------------------------------ ---------------------------- About Quality and Texture A high -quality set of plastic for the entire scooter, absolutely all the fasteners as in original details, except for several points, it is necessary to drill holes to install a small beak on the main beak, as well as a hole for the output of the Stopsignal of the spoiler at the right sidewall, all the other is fine, complete compatibility and easy installation without fitting and modifications ABOUT THE FEELING OF USE After installation, only positive emotions, absolutely good plastic, perfectly suitable and beautifully painted, no disappointment, in the photo you can see this set after unpacking, only the gas tank cover did not get into the frame Products to Buy Together A full compartment of painted plastic, additional purchases are not required, everything is perfect Difficulty of Installation Light installation, instead of old plastic, all original fasteners are compatible 100% COST Performance and Comparison with Other Products Low cost of a set of plastic, but high delivery cost, TC This product occupies a large amount of space ABOUT SHIPPing and PACKAGING Reliable packaging in a box and soft material that does not scratch the coating of plastic Any Concerns, Countions, or Advice When Purchacing Keep in mind that refinements are needed in the form of holes that are not enough on this product, 3 holes must be drilled Powered by Google Translator
View detail
Seat NBS JAPAN
My Honda monkey did not have the original seat when I bought it. Outwardly, it looked great, but the ride was somewhat uncomfortable. The original seat could not be purchased, so I decided to try this replica. There are no problems with the quality of the materials, over time everything will be clear, while everything is fine. By design, everything is fine, soundly, there were no problems during installation. On my Honda monkey, when I bought it, there was not an original seat. Outwardly, it looked great, but it was somewhat uncomfortable to drive. The original seat could not be purchased, so I decided to try this replica. There are no problems with the quality of materials, over time everything will be clear, while it is normal. By design, everything is fine, soundly, there were no problems during installation. View detail
I've had it for 8 years.
I installed it with Small machining and … what a surprise, I've had it for 8 years in its current state.
I've kept most of them covered with Cover, but even so, they've lasted surprisingly long; if they were OEM, they would be a shadow of their former selves.
As expected, recently it has become difficult to remove dirt and Black Mold grows under the Cover, but each time I put Dustcloth soaked in kitchen bleach and bleach it. This is a very good way to revive it.
For persistent stains, such as those from shoe hits, use Micro compound. In moderation." Taking.
I know it's cheap, so I should buy a new one, but I'm using it after modifying it a bit, so it's a hassle to replace it and modify it again, and I'm quite attached to it.
What's a bit of a surface white is the color loss and the decrease in transparency.
I recently noticed that it was originally Beige-ish. That cheesy color. was nearly bright White from sun exposure & fading over time.
The transparency is much less and no longer shows through to the Levels close to OEM.
The surface also remains smooth without any MicroCracks.
This made it even harder to replace them.
I heard that some lots of this product have a round BALI in the Center section (← did they change factories along the way?). I heard that some lots of this product have a round BALI in the Center part (did they change the factory in the process?), but perhaps the current distributed product has been solved by eliminating the BALI.
I can recommend it quite strongly because it is semi-durable and becomes more luxurious with each use (laughs).
View detail
Nice very Super cub50........................................... View detail
คุณภาพเหมาะสมราคา งานดี แข็งแรง และเข้ากับตัวรถใด้ดี ใส่ใด้ทั้ง Honda and yamaha View detail
Great spoiler to replace the original
About quality and texture
Excellent quality of molding and processing of plastic, all corners are made indistinguishable from the original, perfect mounting holes, fits and fastens well to a standard mounting plate
About the feeling of us
The spoiler was pre-painted in white standard color, there was no burr on the surface, the plastic and coating are easy to process, the quality is identical to the factory, even the paint from the factory looks very good, but I needed a different color
Products to buy together
This kit only comes with a plastic spoiler, if you are looking for a replacement plastic part, then this product is for you.
Difficulty of installation
Easy installation in a standard place, instead of a damaged factory part, all mounting holes are identical and perfectly match the mounting plate
Cost performance and comparison with other products
The price is pleasantly surprising, the original spare part is much more expensive, however, the quality corresponds not only to the price, but also to expectations
About shipping and packaging
Packed in soft packaging, but Webike additionally packed and protected the item from damage during transportation
Any concerns, cautions, or advice when purchasing
Please note that there are only two kinds of color, black and white, the parts are factory painted with a good coating, so if you need a different color, then be prepared for additional painting -------------- -------------------------------------------------- About Quality and Texture Excellent quality of casting and processing plastic, all angles are indistinguishable from the original, ideal fasteners, a standard fastener is well suited and fixed ABOUT THE FEELING of US The spoiler was previously painted from a white standard color, no burrs were on the surface, plastic and coating are easily processed, the quality is identical to the factory, even the paint from the plant looks very good, but I needed a different color Products to Buy Together Only a plastic spoiler is delivered in the kit, if you are looking for a replacement of a plastic part, then this product is for you Difficulty of Installation Easy installation in a standard place, instead of a spoiled factory part, all fasteners are identical and perfectly suitable for a reckoning plate COST Performance and Comparison with Other Products The price is pleasantly surprising, the original spare part is more expensive, however, the quality corresponds not only to the price, but also to expectations ABOUT SHIPPing and PACKAGING Packed in soft packaging, but Webike additionally packed and protected the part from damage during Any Concerns, Countions, Or Advice When Purchacing Pay attention to the fact that only two types of color, black and white, the details are painted at the factory with a good coating, so if you need a different color, then be prepared for additional painting Powered by Google Translator
View detail
Fits: HONDA Super Cub 90, HONDA Super Cub 90, HONDA Super Cub 90, HONDA SUPER CUB70, HONDA SUPER CUB70
Good product!
I had been using OEMSeat, reupholstering it when it tore, but the base had already taken a job due to age, so I bought this OEM compatible product.
The hinges used for Seat installation are also included, making installation easy.
This is quite well done.
good point
Performance and shape are almost OEM.
Hinged for easy installation.
Seat thickness is also quite thick, so durability and touring are also expected.
The performance is better than that of Seat, which is dress-up oriented.
Good cost performance. Quick and easy to obtain.
No bad points.
It is only a discovery, but I really like this Seat.
If you like the OEM look, give it a try.
View detail
You can use it.
We are aiming for a Spec. that is insulted by its appearance.
I'm not aiming for a stylish Basket, but a farmer's CUB, an auntie's CUB...but very fast.
The original DELUXE bracket is attached to the front basket, making it easy to install.
good point
It also has a large capacity, so it can hold a lot of things (laughs).
The body of the car looks larger because of the protrusion in front of it.
Installation is easy since it is OEM compatible.
A bad point
It is better to tie a rope or something to prevent the luggage in the basket from jumping out.
It is a highly practical component of a traditional form, so I can say with certainty that it is a good choice.
View detail
Fits: HONDA Super Cub 90, HONDA Super Cub 90, HONDA Super Cub 90, HONDA Super Cub 90, HONDA SUPER CUB70
OEMs have their reasons for being OEMs.
At first, I was using a type of Chain Cover that can see the chain instead of a type that covers it, because I thought it would be easier to maintain, but it deteriorated quickly.
I was wondering if it would be a good idea to return to a Type that covers and protects it like the OEM. I took this one and put it back.
CUBs were originally designed to be practical vehicles and to require the least amount of maintenance.
good point
The Chain is free from dust and sand, which helps prevent deterioration of the Chain.
Basic pontoon attachment.
Cheaper than OEM, significantly so.
A bad point
Installation may be a little troublesome (laughs).
I think I'm going to stop using the …Chain bare, since the CUB has a small window on the Chain Cover through which the Chain can be extended and refueled.
Once again, I was impressed with how well thought out and designed the CUB is.
View detail
Fits: HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 90, HONDA SUPER CUB70
Scratches are common on side covers.
KICK-started CUB, side cover was replaced because after 20 years of riding, it was too scratched to look at.
OEM compatible.
I think the color is slightly different.
good point
Cheaper than OEM.
Easy installation due to interchangeability.
Plain, so it can be personalized with Sticker or Emblem.
A bad point
● I think there is a little BALI.
If you start KICK, you'll get scratches all over it without even knowing it, so if you're worried about it, replace it or paint it. This is cheaper than painting.
View detail
Even though it's a Universal Product, I was able to install it on my PC.
I installed it on my GSX1400.
I bought a Single Item instead of a Bolt set, and I bought a separate Bolt from my local Home center.
Quantity:Pair (for Left and Right) I added a bracket to the hole under the Cowl to increase the rigidity.
After installation, the driving wind was reduced to a certain extent, and the wind did not hit me up to my groin area.
Personally, I'm more pleased with the change in styling than the windshield effect!
View detail
Fits: HONDA Super Cub 90, HONDA Super Cub 90, HONDA SUPER CUB70, HONDA SUPER CUB70
I don't feel any different.
I found out that the HondaOEM Product will be torn down by IonCrack in 7~8 years, so I decided to replace the Front Fender for the second time with the Other Brand Product which is about 1/3 the price. There is no strange distortion, and other than the slightly darker color, there is no sense of discomfort like this, and I am satisfied.
All you need to do is to remove the front tire and 4 screws, so you can do it in 30 minutes.
The front fender sticker of the moped 2 class that was not attached to Honda OEM was attached from the beginning, and it was saved. Well, the way to put it was a little messy.
View detail
The quality is very good. Delivery very fast Excellent service The product is exactly as the picture is not disappointed, the work is beautiful, well done Good packaging Overall very good, give 5 stars. View detail
Let's save up before it's gone.
I bought this for the exterior of my 2012 PCX.
It's not that it was cracked, but I bought it because I thought that the day when I can't get the exterior at this price is near because SmallWound and Crack are seen in some places due to too much severe environment and new PCX is coming out rapidly.
[How is it used?
It looks like the current exterior will hold up for the time being, so it will be fertilized by Chest for a while.
Was the one you received as per Image?
I was surprised that the paint was more solid than I had imagined.
Lame processing? If you don't compare it well, you can't distinguish it from OEM.
Was the installation difficult?
I haven't installed it yet.
However, the claws that hold the Cowl in place are really easy to break, so if you're planning to work on it, please be very careful!
[Included Parts:were they on?
It came with a large piece of corrugated cardboard. (PACKING)
If you could just sum it up for me...
[Was there anything that disappointed you?
It was better than I was expecting.
If I had to guess, I'd say 、、、、 Ummm...
Other items that would be helpful
Items to buy together
→ Let's buy a lot of things together at this time.
View detail