Reviews
Fits: KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI XANTHUS, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYRX
Wide selection of colors
I purchased this bar end to replace the one I had originally installed. It took a little bit of time to install, but I was able to get it on without any problems. View detail
That's what I'm talking about!
I wanted to change from NORMAL to this product. There are about 4 different types, and there are many color combinations among them, so I was able to choose the one I liked best. The grip is comfortable and the texture is not cheap. (fits with cosmetics) There is no loss in purchase. View detail
Recommendations on Dress-up
There is no problem with NORMAL, but I installed it with a little dress-up.
There is no rattle, the texture is good, and the Grip area feels tighter. It feels a little stiffer than the NORMAL when you grip it, but it doesn't feel nippy all the time.... Well, it's just that when you get stuck in traffic, maybe it will seem tighter. If you are worried about it, it might be safer to choose Long lever or Touring type.
It looks good and is a recommendation for dress-up.
View detail
Fits: KAWASAKI NINJA1000 (Z1000SX), KAWASAKI Z1000 (water-cooled)
Is it really for Z1000?
I bought this for my z1000 14 MODEL.
Mounting Pitch is not slightly aligned.
I was forced to put it on, but it turned out to be a cutthroat Breaking!
There is no drag, but it is doubtful that this Level is really for Z1000!
View detail
Fits: YAMAHA TMAX500, YAMAHA TMAX530, YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA TMAX530
It is a good product with high quality.
I had used U-KANAYA's ClutchBrake Lever in the past. The handlebar end is also of good quality, and the installation instruction manual was carefully written, so I was able to install it without any problems. I am very satisfied with the product as it seems to have reduced the vibration of the MAX500 Type 3. View detail
Fits: HONDA CBR400R, HONDA CBR400R, HONDA CB500F, HONDA CB500X, HONDA CBR500R
No discrepancies! Perfect compatibility!
Maintenance is all left to the dealer, but I was able to replace the lever by myself without difficulty. I feel no discomfort when I install it, and the compatibility with the motorcycle is perfect. View detail
Fits: Others Touring typeLever
Easy to grip!
I bought a Kanaya Lever Short in the past because I wanted to grip the Clutch lever with all four fingers except the Small finger, and the Brake lever did not need to be a Short.
Quantity there:I told myself that it was a Set product, but it still didn't feel right, so I bought the product in question this time.
The assembly itself is not difficult, but there are some minor parts, so be careful if you are thinking of replacing them!
View detail
easy to grasp
The OEM Brake lever position was not quite right for my hand, so I went with Lever with Adjuster.
It's better than OEM because it can be adjusted in 6 steps and my finger is Fit to Lever.
View detail
good quality
Good quality and the finish was so good. The quality is also excellent, and although I have tried several manufacturers' products, it is a product that does not fall behind this price. So this time, I will buy it again. It is a product you can trust and buy. Turustsumi Ligerara Good quality and the finish was so good. The quality is also excellent, and although I have tried several manufacturers' products, it is a product that does not fall behind this price. So this time, I will buy it again. It is a product you can trust and buy. Turustsumi Ligera View detail
Short leveraging
Shorted for Lever Guard installation.
As you can see in the image, it is quite short.
As a result, the Brake is a single middle finger, and the Clutch meatPoint is a very close 636, and the subtle adjustment of gripping and releasing is Quantity.:I managed to do it more easily with 2pcs, I think.
The control system is not to everyone's taste, but it is worth a try for small hands and women who can pull with less force by holding the end side of the lever based on the Lever principle.
The problem is that the price to try it is limited to those who have the financial resources to try it, and it is inexpensive.
The 13-18 Lever will not fit the New Model 636.
human sacrifice (-_-;)
View detail
Fits: HONDA CB400SF, HONDA CB400SUPER BOLDOR
Cool and easy to operate
The lever of the motorcycle is easier to operate and the clutch is a little lighter. The part where the clutch falls over is a bit stiff at first, so I recommend applying grease to it. View detail
Clutch switch will not work.
If you don't use the Adjuster at the far end to the third level, the Clutch switch will not work.
There may be a problem with the installation, but I think that improving the lever shape will solve the problem.
View detail
Replacement from OEMLever
The BMW 1000r has a clutch sensor, so I had to relocate the parts from the lever, but the work was smooth and accurate. I'm glad that I replaced it because it looks and feels very nice. If I may say so, the clutch lever is a little far away even when adjusted to the smallest position.
I think it would have been fine if I had chosen the Touring type.
View detail
Fits: KAWASAKI NINJA2 Helmet50RR, KAWASAKI NINJA2 Helmet50RSL, KAWASAKI NINJA250R
Reliable Brand Power
I didn't want to install a cheap one and have a loose or wobble.
It's a bit expensive, but it's the same brand I used on my motorcycle before I switched.
Was the one you received as per Image?
I was worried about the color of Green Light Adjuster on Red Lever, but
I'm glad it's surprisingly MATCHED!
Was the installation difficult?
Even as a beginner, I was able to install it smoothly with the help of the Net video!
Since Grease is applied to the installation part (contact part moving part) of Lever, it is recommended to purchase it together.
I used KITACO Super multiGrease.
How was your experience with it?
No problem at all
I'm happy with the quality of the product.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09SP
Satisfied with the function&Design
I was thinking of buying a Lever because the NORMAL Lever did not have the Clutch Side adjustment.
I'm very satisfied with the design and the anodized color of the slit and titaniumium color of the lever part.
View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-S125
U-KANAYA Lever
Lever position can be adjusted in 6 steps from near to far.
Compared to the OEM Lever, the Lever position is at the front, making it easier to put your hand on.
Especially for those who felt OEMLever was too far away.
Personally, it has reduced the strain on my hands when operating Brake.
The color variations are abundant and you can enjoy CustomCoordinates.
The installation process is relatively easy.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F
U-KANAYA :FoldableRType Aluminum Billet Lever
I wanted to unify the handlebar and lever in black, so I decided to use U-KANAYA's Foldable Type R Aluminum Billet Lever Set.
Purchase (For the 2015 GSX-S1000) There is a lever made by ZETA, etc., too, but I chose it because accuracy seemed to be able to be expected in domestic production.
Look at the product and be honest. Beautiful! I was satisfied with the results.
When replacing, remember to remove the collar from the OEM Clutch lever and transfer it to the Billet lever side.
Things. (I thought it was kind of wobbly, so I looked it up and forgot about it) It means you should read the Instruction Manual properly.
The handlebar is black and feels good when riding. The feel is also good.
View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-S125
High quality and adjustable
I bought this for my wife's Motorcycle.
I heard that Lever is far away.
I replaced it with an adjustable Lever.
No rattling etc. High quality and good.
View detail
Fits: KAWASAKI BALIUS2, KAWASAKI BALIUS, KAWASAKI ESTRELLARS, KAWASAKI ESTRELLA, KAWASAKI ZZR250
It also plays a role in preventing vibration.
Single engine has severe vibration when you use it at high rpm for a long time and your wrist gets tired easily.
I found a way to attach a weight to Handlebar itself, so I did it.
The results were right on target!
good point
Vibration has been reduced, so I am less tired.
You can choose from a wide variety of colors to suit your taste.
Installation is easy with a single Phillips screwdriver.
A bad point
None
It's a very simple part, but it's very effective and easy to install.
View detail
Fits: DUCATI SCRAMBLER CLASSIC, DUCATI SCRAMBLER FLAT TRACK PRO, DUCATI SCRAMBLER FULL THROTTLE, DUCATI SCRAMBLER ICON, DUCATI SCRAMBLER SIXTY2, DUCATI SCRAMBLER URBAN ENDURO
Closer, but farther.
hmm
I installed it on my DucatiSCRAMBLERsixty2 and it's closer but that's it? The closest I could get it. I made it the closest and it works for small people with small hands.
If you put on thick Gloves in winter, it will be difficult to operate at a distance.
I hope they will think a little bit more and make it so that the distance can be adjusted closer, because there will be no one who buys an adjustable type and adjusts it far away. The quality of this product is reasonable for the price, but it is not so different from cheap 2-3 thousand yen ones. I was expecting a high price, but I failed.
If you're a woman, you'll definitely find the Clutch lever difficult to operate with it being so far away.
View detail