Reviews
![[Repair Parts] Brake Lever For Stock Type](https://global.webike-cdn.net/photo/article/59/1447655138559L.jpg)
The color tone ... (>_
I thought about the products of other Manufacturers trying to replace the Lever with the Wound with standing, but since I can order parts from each part, I ordered the same U - KANAYATitanium color, but I received the same It was Silver style Titanium color.
Color I think that it is different at all? The color is different at all! I think that there is nothing wrong with the production line, but even if I have only Brake side with return goods impossible, only Aluminum (>_
View detail
![[Repair Parts] Clutch Lever For Stock Type](https://global.webike-cdn.net/photo/article/03/1447657047003L.jpg)
Exchange with Brake side! Adjuster installation is troublesome (>_
The product itself is a very easy-to-use Parts. Brake side exchange as well Champagne gold tuning It changed from Titanium to Clutch lever of Silver style Titanium color.
For Lever, Adjuster only for replacement, those who purchase please be careful when assembling after Rose (^-^) In the Adjuster part, there are Small Springs and Balls above and below each Quantity : 2pc. Set installed.
Box etc. If you do not work with or you will lose parts (^_^;)
Since there is no Instruction Manual for assembly, please first understand the structure of each part first and then work. You will soak your satisfaction after completion.
View detail
![Low Down Link [CB1300SF(SC54) : CB1300SB (SUPER BOL D’OR)]](https://img.webike-cdn.net/catalogue/18801/sc54ldsv_TS.jpg)
Fits: HONDA CB1300 Super Four, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR
Improvement of feet
We mounted it in First Model Type CB 1300SB. The first model type was badly compared to the second type model, so we compared and compared the OP's Low seat and Anko pulling process and purchased and installed the U-KANAYA Lowdown Link. Installation work is not so difficult, use Rear's Damper 1 pc using Center Stand (Lower side only) I think that it is possible to work with DIY if you have a Kill that can adjust the Chain or a tool if it is a work while removing it.
LINK Aluminum piece is shipped so that Screw will not scratch the OEM's Swingarm when adjusting the angle Angled Parts : You can feel attention to.
After fitting, the feet got better and Position changed slightly so we adjusted the height of Handlebar as well. Not only good things, but also Demerit, with the Tandem running and heavy loading Rear is Large and Stroke, the upper part of the Damper and the lower part of the Rear cowl come into contact.
As Frequency is high and momentum is good, it seems that Crack will enter the lower part of Rear cowl, so whether to raise the Pre-road of Spring of RearDamper or to consider the loading to Rear, will become necessary.
View detail
![[Repair Parts] Brake Lever For Stock Type](https://global.webike-cdn.net/photo/article/49/1380328845549L.jpg)
Since I did lever handling in 2 credit of an index finger and the middle finger, the Short lever of the Manufacturer was used, but since it was easier to already make four beam credit when caught by traffic congestion, it decided to exchange. If
Since I did lever handling in 2 credit of an index finger and the middle finger, the Short lever of the Manufacturer was used, but since it was easier to already make four beam credit when caught by traffic congestion, it decided to exchange.
If short, three become shorter [ a Long ] than a pure Lever by a Limit just two.
However, on account of Lever form (a bend is shallow), if it does not set more distantly than the time of a Short, it will become touch that the third finger and a little finger are pinched, in my case.Since the price of the single articles is also conscientious and the difference in appearance can also be freely enjoyed in a combination in color, it is very pleasing.
View detail
![Machined Aluminum Exhaust Flange [Exclusive For GPZ1100]](https://img.webike-cdn.net/catalogue/18997/kmf002-01sv_TS.jpg)
Fits: KAWASAKI GPZ1100, KAWASAKI GPZ1100
It is a Gorgeous even if it takes by an Exactly in a Stainless pipe. It became foppish. Although it is not visible by a Cowl. it is adhesion when removing it next, since appearance is also free from rust with last thing -- it is alike and is
It is a Gorgeous even if it takes by an Exactly in a Stainless pipe.
It became foppish.
Although it is not visible by a Cowl.
it is adhesion when removing it next, since
appearance is also free from rust with last thing -- it is alike and is not afflicted.
Rather, that one is Heaven.
View detail
![[Repair Parts] Clutch Side Adjuster (Control Dial) For Stock Type](https://global.webike-cdn.net/photo/article/68/1368443782168L.jpg)
Fits: その他
Color change of the Adjuster of a Brake lever was tried! Since it thinks that a Motorcycle will be dressed up in the color scheme of a Gun-meta Black gold although it is partial, it is from a Gun meta to a Gold. Since the Lever itself calls it Black, doe
Color change of the Adjuster of a Brake lever was tried! Since it thinks that a Motorcycle will be dressed up in the color scheme of a Gun-meta Black gold although it is partial, it is from a Gun meta to a Gold.
Since the Lever itself calls it Black, does the Gold of an Adjuster portion look to advantage too?
Regret is not carried out although it is completely self-satisfied.
On a description, since
attachment can be performed if one Screw removes by 6 angle Wrench, it is easy.
View detail