Reviews
It seems to be more durable than OEM.
It was firmer than OEM and seemed more durable.
Since these are completely self-satisfied Parts, there is little need to replace them unless the OEM Mud Guard runs out or something, but I replaced them out of self-satisfaction.
View detail
Was good
Fender had been hit by a stepping stone.
I bought it to hide scratches and to protect against stepping stones.
Quantity:It's even better when you put it on as a Set.
Slightly more classic feel.
I am also satisfied with the design!
View detail
It was definitely hard.
As mentioned in other reviews, Screw is hard and you will lick it at worst.
So it was easy to get it with the 3rdDriver!
The rest can be done by following the Instruction Manual!
View detail
The detailed Instruction Manual can be a detriment….
I like that the Instruction Manual is detailed, but I think it is rather difficult to read.
No problems with dimensions, etc., and easy to Long!
However, as promised, it is fixed to the outside of the Fender (laughs).
View detail
great design
Hunter Cub's stock mud guard is smaller than expected
It looked cheap, so I bought it and installed it.
The performance after installation is that the size has increased, allowing it to function as a proper fender, and the design is also excellent.
I plan to purchase additional front guards -------------------------------------------- --------------- Hunter Cub's genuine mud guard is smaller than expected It looked cheap, so I bought it and mounted it. After mounting, the performance is larger, so it is possible to function properly and to design. The front guard will also be purchased Powered by Google Translator
View detail
Fits: HONDA CT110 HUNTER CUB PMODEL(JH2JD01U*PK200001- and JD01-5300001-)
It is easier to run.
The original GEAR ratio was too low (because it is an agricultural motorcycle), and the headway came too soon, so I changed it from 45 to 41. As a result, I can now ride with ease with Switzerland, and although I feel that the characteristics of the CT110 have diminished, I am satisfied with the increased ease of everyday riding, since it also has an auxiliary gearbox.
Sprocket and Chain's Quantity:I was also happy to be able to buy at Set.
View detail
Making is complicated
Pitch of mounting hole does not match.
The Pitch of the hole was additionally machined with Punch for drilling and installed.
Why are there such basic differences when it is supposed to be Exclusive Design?
View detail
Less mud splashing!
Less mud splashing around the Engine
Less leg wetting!
View detail
good!!
It brings out the personality of ct125 well. The cost-effectiveness is very good, the delivery is fast, relatively easy to install, and the final result is very cute. View detail
Might need a little processing.
The original hole in the product was larger than the bolt to which it was attached, so there was quite a bit of play.
I inserted it up to the Limit and drilled a separate hole there that is the same as the Bolt diameter.
It is one size larger than OEM, so its defensive capability has been considerably increased.
There is no contribution even if the speed is increased.
View detail
Hoping to prevent dirt on toes
I have no complaints about the product itself, but anyway, removing the Bolt of the OEM Mud Guard was Large strange. I think there are individual differences in the degree of sticking, but the bolt did not turn at all no matter I sprayed lubricant, put in a penetrating driver, or scorched it.
The distance between Mud Guard and Engine is close due to the FenderUp, but I don't think they will contact each other so much because of the solid Material and shape of the product.
View detail
Fits: HONDA CT110 HUNTER CUB PMODEL(JH2JD01U*PK200001- and JD01-5300001-)
Comfortable cruising speed
The OEM rear sprocket of the CT110 is 45mm, which is close to the low gear, and is sufficient for city use, but when cruising, I felt like I was pushing the engine too hard, so I decided to replace the sprocket.
As for the effect, although it loses the Torque feel, it is easy to drive at a cruising speed of 60 km/h at a comfortable range of rpm.
The work S-Kill is completely safe for beginners as long as they follow the instruction manual that comes with it.
The quality was fine, but I felt that the price was a bit high because of the overspecified Chain Size in the regular CUB system.
We recommend that you carefully check whether or not Sprocket is compatible with any of the CT110 MODELs in the reimported MODEL.
View detail
Easy installation JA65
It was easy to get to JA65 with Driver and Pliers.
(As per your impressions, the screw is a bit stiff when removing it, but if you know it is stiff first, it is not a problem at all.)
View detail
It was easy to install and looks cool.
It was easy to install and looked cool, but the white seal on it peeled right off. View detail
So easy to install and so cool!
The Mud Guard is now larger and cooler than the original OEM Mud Guard.
Installation was easy and good.
However, the letters of the Manufacturer's name, etc. are sealed, so they may peel off soon.
View detail
Stops mud, etc., well!
It does not look different at a glance, but it is one size larger than the NORMAL. It is a little larger than NORMAL, but it is still a little larger than NORMAL.
The texture is good and the fitting is perfect.
Installation is done by ScrewQuantity:It was easy, just 2 pcs! Highly recommended!
View detail
Cost-effective
It looks cool when installed on a CT125.
The dress-up effect is much cooler than the mud splash prevention function.
We are also pleased that the products are inexpensive.
View detail
The texture is good
I think the quality is good and cosmetic. In other people's review, there is a comment that they licked the head of the Screw, but I think they probably did not use the No.3 Driver. Although it is not very often, I sometimes encounter a large Plus screw that should use the No. 3 driver. The Mud Guard Plus screw is just like that, you should use Phillips Screwdriver No.3, because the screwdriver is ExactlyFit to the screw and there is no sign of licking. And just for reference, I wanted to run 3.00-17 tires that were thicker than OEM, so I didn't buy an OffsetBracket, but instead drilled a hole with a steel drill 10mm offset from the OEM hole position. I like it because I wanted to put on a thicker tire with a more casual lift than the 45mm and 60mm upsets on the market. In addition, the edge of the bracket on the Fender Reverse side for the Mud Guard was also shaved with Grinder to make it flat. I am prepared for the seal peeling of the Mud Guard by other reviewers, and I think it is good to lose it and put on Plain or Parenthesis. View detail
Fits: HONDA CT110 HUNTER CUB PMODEL(JH2JD01U*PK200001- and JD01-5300001-)
Anyway, it lasts a long time.
Used on ct110 CT110 HUNTER CUB. This is the second time I have used Repeat. 18,000 km later, I replaced it. The DrivenSprocket has high wear resistance and lasts for a long time. View detail
Cool!
I was looking for something to do with the cheap OEM Mud Guard, and when I found this product, I bought it immediately (laugh).
textured good feeling
I have read in other Impression that you should be careful not to lick the screws when you remove the OEM.
Oh this is certainly going to lick this one, beware!
I almost licked it a little, but the installation was completed without incident.
I'm told that the letters and such tend to peel off, so I'm going to wait and see how long I can wait.
View detail