Reviews
Satisfactory in appearance and function, but price is a little high
[How is it used?
It attaches to the Stack pipe and guards the Headlight. I do not often drive on forest roads, but I installed it to prevent insect Attack from getting dirty and insect carcasses from getting caught in the gap between the headlight and the Attack. I think it also has a dress-up effect, although it is not to my taste.
Was the one you received as per Image?
The Polycarbonate Guard is also not too bad, but not too bad. For this gold price, I felt the quality was not so good. For this price, I would like to see a better Bracket.
Was the installation difficult?
If installed according to the Instruction Manual, even beginners should be able to install it without problems.
However, it says that no one without a mechanic's license should perform the installation...
I think it is good that it can be installed on the Stack pipe, but it can be moved back and forth a little and installed in the desired position.
The Instruction Manual warns that over-tightening of the Bolt may lead to cracking, "Too tight." It would be nice if the Torque of tightening was listed, but why isn't it? It would be nice if the Torque of tightening was stated, but why isn't it?
How was your experience with it?
It is good to see that insects are hardly getting into the gaps in the Headlight anymore.
I am glad that wiping off the bugs is easier, but of course it is harder to do when cleaning the Headlight itself.
I have never seen anyone else wearing it, so I think it is good for those who are looking for something different and for those who are looking for a dress-up effect.
[Included Parts:were they on?
It was attached.
[Was there anything that disappointed you?
Pad looks good and functions well, but the texture was not so good.
I thought it would be more solid at this price.
It could be that they are cheapening the product for lightness, but if that is the case, why not make it cheaper?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The Instruction Manual states the following
Do not attempt installation unless you are a qualified mechanic."
"Any inquiries regarding installation should be directed to the mechanic who performed the installation, not to the purchaser."
From Manufacturer's point of view, I think it is listed to avoid responsibility, but how many of the people who buy these are qualified mechanics?
I think that the probability of accidents due to installation defects is almost nil for this product, but not at all, so it may be inevitable to write this, but I don't feel good when I see the Instruction Manual after purchasing the product without stating this in the product description section. I guess. What about knowing about it after you buy it?
The functions and appearance are good, but I can't give a good rating overall because of the texture, price, and the way the Instruction Manual is written, but I can't help but recommend it. I think it is a good buy for those who go touring in Hokkaido or are concerned about insects.
View detail
disappointing
The quality is worse than I thought.
I feel like it will be ruined in about 6 months.
It is not recommended.
View detail
The release paper was awfully hard to remove.
Tank Pad and Knee Grip Pad are Quantity:I think it's attractive that it's a Set and that it's Exclusive Design with good fitting.
I bought it again because I had used it before for about 2 years for another car model and the surface was a little worn and it seemed to be durable, but this time the release paper was very difficult to peel off and when I thought it was finally peeled off, the adhesive side came off from the body and I was upset. (I could have said defective).
In addition, as for the Tank Pad, the area is wide and the protection performance seems to be very good, but I do not think that the design is good because it is too large.
For this reason, I prepared a different Tank Pad.
View detail
It doesn't fit in 2020.
I bought it believing it because Manufacturer answered that it fits to 2020 in a certain Site.
On the 2020, the headlight is a little deeper than the LED, so the space between the headlight and cowl is about 30mm.
I will try to work it out through Bracket.
View detail
Size of Clamp is Small.
The size of the clamp does not fit the 1 inch Handlebar, so I had to buy it separately. View detail
Fits: DUCATI SCRAMBLERIcon, DUCATI 1299 Panigale., BMW R1200RS, BMW S1000RR, SUZUKI GSX-S1000, SUZUKI GSX-S125, SUZUKI GSX-S750, SUZUKI GSX1000S KATANA, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX1400, SUZUKI GSX250R, SUZUKI ST250E Type, TRIUMPH STREETSCRAMBLER, SUZUKI VANVAN200, SUZUKI BANDIT1250, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM250, SUZUKI GRASS TRACKER BIGBOY, SUZUKI DL1000 V-STROM650, SUZUKI Intruder Classic
The Design was cute, but the quality was horrible, as it would fall apart after just one use.
The design was pretty but the quality was terrible.
After just one use, it will be torn to shreds.
If you're thinking of buying one, you need to be prepared.
I can't recommend it!
View detail
So-so?
Parenthesis better?
And as others have written, you'll have to pull hard to get it on
The color was good, but the paint was not as good, with some flaking and scratches
Not much wind protection
View detail
Fits: HONDA FORZA(MF10)
MF10 drilling is required
Hmmm, no need to drill holes in the Fender or anything 。 View detail
Fits: HONDA Rebel 250, HONDA Rebel 500, HONDA Rebel300, HONDA Rebel 250
Difficult to install
Although it is a compatible car, I was quite confused about the installation (position of the holes, etc.)
It takes a lot of strength to bend the frame
Ato, I bought Clear, but it had Smaller Wound from the beginning
View detail
![Electronic flashSticker1 for BWS125 [monochrome]](https://img.webike-cdn.net/catalogue/images/19051/bws125-1-s_TS.jpg)
Fits: YAMAHA BWS125(BWS)
Cutting sheet
As a Cutting sheet Sticker, there is a thin thickness of Material and air and Wrinkle are easy to lean.
It is too expensive in price.
If it is less than half price it will be acceptable price...
View detail
Fits: YAMAHA BirdCity, YAMAHA Tricity155, YAMAHA BirdCity 155
Dissatisfied with quality.
I exchanged the Brake lever and the Screen so far got to interfere, so I purchased the WorldWalk Screen I was curious about.
Hand guardetc. It seems Design does not interfere even if it is worn.
As I tried to replace the Brake lever did not interfere.
However, during the replacement work, I did not notice in the room 1. I noticed about 5 cm of scratches and also seemed to be contaminated with foreign substances, so I asked them to re-inspect them on a return basis just in case.
I was told that the wounds I was concerned were gone by Compound, but when I carefully confirmed the items that came back, I could not be satisfied with the quality, after all I decided to skip the installation.
I took pictures of the points I was interested in, but I was concerned about the scratches and the distortions that are different from those polished on the surface.
Although it may be overly concerned with the fine things, I do not think that it is quality that matches the Gold amount near 7,000 yen,
I will post as I hope it will be helpful for everyone.
I bought Smoke, but maybe I do not care much if Clear.
View detail
It was charmed by the low price of the price and purchased. Although there was also an attachment photograph of XJR1200 in Manufacturer HP, it is attached truly and just before in practice. It is the touch to say. If it attaches, there is no c
It was charmed by the low price of the price and purchased.
Although there was also an attachment photograph of XJR1200 in
Manufacturer HP, it is attached truly and just before in practice.
It is the touch to say.
If it attaches, there is no crevice between a light and a Visor.
The windshield effect in high speed operation was not felt at all again.
In the case of a Big naked,
practicality thinks that there is almost nothing.
I think that
Fit of is done if the diameter of a light to a Middle class is merely an about 18-cm NAKED.
Since it is very small size, the Style of a NAKED is not broken down and it becomes an Accent.
We set aside
practicality and it may be recommended in such a sense.
View detail
A Cost performance is good. However, casting of a part of Stay has a chip, or texture is not quite satisfactory. The Screen itself is solid by 5-mm thickness, and it is highly transparent. A result a Screw loosens by vibration on the problem of the par
A Cost performance is good. However, casting of a part of Stay has a chip, or texture is not quite satisfactory. The Screen itself is solid by 5-mm thickness, and it is highly transparent. A result a Screw loosens by vibration on the problem of the part which has weight so so, and the design [ itself ] of a Stay is brought. There are many places currently fundamentally fastened with one Screw, vibration acts on a direction of rotation and a Screw loosens. A measure is required of a Double nut or a Lock nut. Since the Nut very near Handl is a Bolt of Half pitch ?, it does not suit by the usual Screw pace. (It is better to bring the actual thing, when going to a Home center) Since the position of the head is high in case of American one, the windshield effect is not quite satisfactory. (If it lies down, there are effects of enough) Since a description was not attached, attachment also suffered troubles just for a moment. It is general-purpose and the degree of freedom of attachment is high. Since it thinks that the quality of the Screen itself is good, those who can devise by themselves may be bargain. View detail