Reviews
Fits: HONDA GORILLA, HONDA MONKEY
Pimp to Normal cab
It is used for the normal cab of LITTLE CUB. The air screw is hard to turn, but it is very helpful to adjust the idling easily when waiting for a traffic light, etc. View detail
Fits: HONDA CBR1000RR, HONDA CB1000 SUPER FOUR (Big One), HONDA CB1300 Super Four, HONDA CB1000 SUPER FOUR (Big One), HONDA CB1300 Super Four
When replacing the Exhaust System of CB1100etc!
[How is it used?
When we replaced the Exhaust System, we had to replace the Gasket as well, otherwise it would leak and cause power down.
How was your experience with it?
It is designed for CB1300, but can be installed on CB1100 without any problem.
Of course, the quality is fine and can be used without disposal leaks.
How did it compare to other products?
The cost performance is good because it is cheaper and of higher quality than OEM Product and KITACO's same etc. products.
[Points to note]
Note that if it has not been replaced for a long period of time, it will stick to the Engine side and scratch it if not carefully removed.
To prevent waste leakage, replace the exhaust system with a new one even if it is troublesome.
View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI ZRX1100, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZX-12R, KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI ZRX1100, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZX-12R
Posh Exhaust Gasket
I used it on my GPZ900R.
The price was low and it worked fine.
View detail
Fits: YAMAHA TZR50, HONDA NSR250, YAMAHA XJR400, YAMAHA RZ50, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, HONDA NSR50, HONDA CB400SF, HONDA NS-1
Gold's Clutch adjusterZ125pro
The Bolt is a little longer than OEM, but it came on with no problem at all. If you are considering this, please do so at your own risk.
[How is it used? Town ride
Was the one you received as per Image? Yes.
Was the installation difficult? Easy if you can lubricate the Clutch Wire
How was your experience with it? I think it has quite a dress-up effect.
[Included Parts:were they on? None
[Was there anything that disappointed you? None
Other items that would be helpful
Just work together when lubricating the installation points and hang/clutch wires.
Availability and clarity of Instruction Manual/A piece of paper is included, but it is a reminder to have it properly installed by a skilled contractor. This is fine, since the person who intends to install such a component does not need instructions for installation or use.
Notes/Nothing in particular.
Items to buy together/None in particular
Opinions and requests for Manufacturer/Good enough product.
View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XJR400, YAMAHA XJR1300, YAMAHA FZS1000 Feather, YAMAHA FJR1300, YAMAHA FZ1, YAMAHA FZ1 Feather, YAMAHA FZS1000 Feather, YAMAHA FJR1300, YAMAHA FZ1, YAMAHA FZ1 Feather
I'd have to look closely to see it.
It is solid and looks good.
The problem is that the color is so light that I feel that if you don't look closely, you won't be able to tell that it has been changed.
Self-satisfaction.
View detail
Heat and scratch protection
The evaluation did not seem to be bad, so I bought it to try it out.
Since it seems to have high heat resistance, it is used to prevent heat deformation and scratches on the inside of cowls. The price is not that much, and there are a few meters, so it can be used to some extent. I would like to check the adhesiveness for a while.
View detail
m8Bolt to Fashion.
The m8Bolt is Fashion. The price is low, and the luxury is good. View detail
I kind of bought it because of its face white shape.
[How is it used?
I had been restoring the LITTLE CUB that was given to me by hanghang for half a year, and when the restoration was over, I wanted to start working on custom and dress-up pedals. I wanted to match the color of the Grip with the color of the Footpeg Rubber and the Rubber of the Kick pedal. If it's a LITTLE CUB, it's a Barrel Style Grip! I bought it with a middle-aged stereotype.
How was your experience with it?
at the same time Wrap-around Grip heater." I plan to install the Mini Keg Grip at a time when I will no longer be using the Grip heater (around March) because I have purchased a new Grip heater.
When I took this product out of the box and wrapped it around the above Grip heater...I gave up on installing it this winter because it is hard to grip when I wrapped the Heater around the Mini Keg GripSingle Body because it is thicker than the Grip.
My impression after holding it with Single Body is It's thicker, but just the right thickness to make it easy to grip." I felt that."
How did it compare to other products?
The shape of the Grip is "Barrel-shaped." Therefore, it is difficult to compare it with the Grip of the normal design, but the grip of the GripCenter is thick, so if you can't handle it, it is a very bad Grip.
If this Grip was installed on a SUPER SPORTS750 series or a big bike, I would be inclined to silently replace it, but I wonder if it would be good for a LITTLE CUB. I think it's a good idea for a LITTLE CUB.
[Points to note]
The unique shape and colorful color variations.
Other items that would be helpful
The deciding factor in the purchase
The reason for this was the lineup of brown colors that matched the footpeg and kick pedal, and the reasonable price.
I was not sure about the Brown Grip because HondaOEM Product also had a Brown Grip, but I was intrigued by the barrel-shaped design. If I can't eat the discomfort after using it, I may replace it with OEM Grip Brown.
【Included Parts:presence or absence】.
Quantity:Pair (for Left and Right) Grip of 1Quantity:Only Set is included.
[ITEMS TO BUY TOGETHER
I don't think there is anything special to buy since GripSingle Body is the only thing that works, but I'm aiming for 3,000 yen to get free shipping, so I'll buy Mirror and Footpeg Rubber (when you buy a used CUB, the footpeg rubber on either side of Large may have holes from falls or other causes. I'd like to buy Mirror or Footpeg Rubber (when you buy a used CUB, you may find that one of the large Footpeg Rubber has been penetrated by a fall or something). Small Things That Concern Me. It is also a good idea to select consumables (brake shoes, engine oil, etc.) that you will eventually need.
Opinions and requests to Manufacturer.
The grips of old CUBs are unique, so there are not many products that are compatible with them.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA livudio, HONDA Livdio ZX
Battery reply
I installed this on my MONKEY 12v Z50J because I rarely ride it and I feel the power is obviously stronger than the dead battery. View detail
Fits: HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA CROSS CUB50
ShininglyMaterial:Stainless Steel
The screw thread of the Chain Adjuster was stretched and felt stuck, so I purchased a Posh product from Other Brand Product instead of OEM.
Adjuster part is longer than OEM, but it is easy to replace.
Shiningly shining Stainless Steel is a nice touch.
Chain is small, so check it often and tighten it at the proper torque.
View detail
Stainless black
We replaced it with Stainless Steel for rust resistance and Black for good looks.
The product is good, but the price is a little high. I would appreciate it if it were cheaper.
We would like to replace the bolt as well, but there is no size available, so only the lock nut was replaced this time.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
CUB of Overhaul, incidentally.
CUB I bought this while I was at Overhaul of The price is cheap and stylish. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
To MONKEY's Overhaul.
I bought this for overhaul of my MONKEY. I had a hard time deciding, but I decided to go with this one because of the price. View detail
Fits: HONDA XR100 Motard, HONDA XR50 Motard, HONDA XR100 Motard, HONDA XR50 Motard
NSR50 being assembled
Used to install rear sprocket on NSR50. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
For Monkey engine maintenance
I used it for servicing my MONKEY and it is a must have for Engine Overhaul. View detail
YZF-R1 is M14
I bought a Washer for M14 for my YZF-R1 (2018). Some people use it 3 times, but I am afraid so I replace it every time.
It is not very profitable to pay shipping charges and hundreds of yen for one order, so it is more economical to buy these kinds of items in bulk, about 5-10 pieces at a time.
View detail
difficult to install
It was difficult to install and tore during installation. View detail
Fits: HONDA GROM125, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
I made a mistake.
It doesn't seem to fit jc92.
The diameter was totally different.
With 10,000 kilometers on it, it wasn't that worn.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Outside Grip (Pierced Type) Convenient for installation of
Outside Grip (Pierced Type) It took a little time to fit the Accelerator Wire thailand core when replacing the throttle cone. View detail
Cap bolt with high universality.
[How is it used?
When I got my 25 year old PAT225WE, I bought it as a replacement for an OEM bolt (some of them I didn't know where they came from) that had been licked and tired at the corners after maintenance and restoration.
Unlike the steel BlackCap bolt sold at the local home centerretc., the Material:Stainless steel makes it easy to use for fixing the exterior and switches, etc., as it is resistant to rust, and is useful in various places.
Was the one you received as per Image?
As I mentioned above, it is a relatively MAJOR design bolt that can be purchased at home centers nowadays, and it is just like the Image product.
Was the installation difficult?
This is a type of bolt that is detached and attached using a Hexagonal Wrench.
If you have the dedicated tools, it is not difficult to remove and install the bolt, as the removal method is the same as that of the Others bolt.
I think it is becoming the next most popular after the normal convex hex Head Bolt!
How was your experience with it?
Although it is a bolt that is relatively easy to pick at, the stainless steel material makes it harder to lick than a steel cap bolt, and the black color makes it less noticeable when fixing switches and plastic parts, making it a very easy product to use.
[Included Parts:were they on?
There are no Included Parts:other than Bolt.
2 Bolts on Package Quantity:The product is sold in each length as a Set.
[Was there anything that disappointed you?
Basically, no.
At one time there was a lot of fuss about corrosion and gnawing depending on the type and characteristics of the Gold genus, but I'm an amateur and don't know much about it.
Other items that would be helpful
Point and hang of installation
It is a convenient bolt that can be used alone or in combination with the FUJI crucible type aluminum spacer.
[Notes]
As with any Bolt, please insert the appropriate tool firmly and deeply into the bolt before attaching or detaching it.
Failure to follow the above will lead to unexpected trouble, such as licking the bolt.
[ITEMS TO BUY TOGETHER
This is a Bolt only product (pack of 2), so if you want to use it where a Nut, Spring washer or Spacer is required, please purchase the necessary items separately.
[Opinions and requests to Manufacturer
Thank you very much for the lineup of various lengths. If you could reduce the price a little more, it would make it easier to purchase large quantities.
View detail