Reviews
Fits: HONDA ZOOMER(Ruckus), HONDA GORILLA, HONDA APE 50, HONDA APE 100, HONDA Live DIO Series, HONDA MONKEY, HONDA MONKEY, HONDA XR50 MOTARD, HONDA XR100MOTARD
CF POSH Flat Face Throttle Cone
I searched to replace the throttle grip of my genuine Ape 100 Type D, and unfortunately, only CF POSH products were in stock. Because it is an old model, after-parts are in short supply. I went down to the parking lot to replace the throttle grip and replaced the grip. This is a very easy replacement. You only need to loosen one screw bolt. As a user, there is little difference between the genuine product and CF POSH's 15% quick grip. -------------------------------------------------- -------- I searched to replace my genuine 100 type D throttle grip, and unfortunately there was only CF POSH product. It is an old model, so there is a lack of inventory of the after parts. I went down to the parking lot and replaced the grip to replace the throttle grip. Very easy replacement work. Only one screw bolt is solved. The 15%Quick Grip of the genuine product and the CF POSH is inadequate to feel the changed part as a user. Powered by Google Translator View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Outside Grip (Pierced Type) Convenient for installation of
Outside Grip (Pierced Type) It took a little time to fit the Accelerator Wire thailand core when replacing the throttle cone. View detail
Fits: HONDA Super Cub 70, HONDA Super Cub 90, HONDA little cub, HONDA little cub
There's no substitute for this.
When I went touring, the CUB had a low throttle, so I had to re-grip it in many situations, which was a hassle.
After replacing it with this one, you can perform accelerator operation just like a normal motorcycle.
I was licking my chops! I should have changed it earlier.
View detail
Fits: HONDA Super Cub 70, HONDA Super Cub 90, HONDA little cub, HONDA little cub
Changed from Inner Throttle
Used on a row light CUB Purchased to change from Inner Throttle to Throttle Wire on a 12Bolt current car CUB as the OEM Throttle Wire is discontinued. View detail
Fits: HONDA ZOOMER(Ruckus), HONDA GORILLA, HONDA APE 50, HONDA APE 100, HONDA Live DIO Series, HONDA MONKEY, HONDA MONKEY, HONDA XR50 MOTARD, HONDA XR100MOTARD
Repair Parts
The OEM Product has a non-slip surface that keeps the Grip from coming off, so attaching it to the Bond makes it easier to return the Grip. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
When you change the grip of SR400, you should use Quantity:Let's exchange in Set!
As per Title, if you want to exchange Grip, you should do it together.
The ThrottleGrip of NORMAL is a special product for Normal grip.
If used as is, processing will be required.
This one was reasonably priced and the quality was fine.
There was just a little BALI, but it is Large sturdy enough to lightly adjust with File.
It seems to be 8%High throttle, but I didn't feel that much of a change.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Cheap.
I recommend it because it is a reliable Manufacturer and cheap. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
It is very useful for Touring.
Because Throttle operation is Large strange because there is a lot of constant speed cruising in Touring.
Even though it is called High Solo, it is about 8% wide, so it can be said that it is a part to support Axel operation rather than driving.
good point
The accelerator operation at constant speed has become easier.
It's easy to install, just replace the OEM Throttle and you're good to go.
It's very cosy.
The quality of the plastic is very good and durable. 3 years of use and no problems.
A bad point
It's not a running High Solo.
It's tiring to keep the Axel open for a long distance. There is vibration and so on.
When the range of Accelerator operation is extended, Throttle operation is less tiring because there is more room.
It's a simple but good part, if you try it.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Might be a necessity when changing Grip heater.
The Grip heater is replaced at the same time as the installation of the Grip heater. 8% High Solo. 2 birds with one stone. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
It is also a necessity when changing Grip heater.
The Grip heater is replaced at the same time as the installation of the Grip heater. 8% High Solo, no need to modify the OEM cone, two birds with one stone. View detail
Fits: HONDA ZOOMER(Ruckus), HONDA GORILLA, HONDA APE 50, HONDA APE 100, HONDA Live DIO Series, HONDA MONKEY, HONDA MONKEY, HONDA XR50 MOTARD, HONDA XR100MOTARD
VM26.
I used to have to reset my grip to open it all the way.
It's almost a nice touch.
the last Almost. But it's better than NORMAL.
I don't like the look of High Solo because I don't like the look of High Solo.
View detail
Fits: HONDA ZOOMER(Ruckus), HONDA GORILLA, HONDA APE 50, HONDA APE 100, HONDA Live DIO Series, HONDA MONKEY, HONDA MONKEY, HONDA XR50 MOTARD, HONDA XR100MOTARD
Used for 12VMONKEY
I have to regrip it delicately to be able to open Axel fully.
I feel like I've changed my mind.
I don't want to make it a High Solo in any way.
View detail
Fits: HONDA ZOOMER(Ruckus), HONDA GORILLA, HONDA APE 50, HONDA APE 100, HONDA Live DIO Series, HONDA MONKEY, HONDA MONKEY, HONDA XR50 MOTARD, HONDA XR100MOTARD
It's almost a Universal Product!
It is used for the switch box and throttle holder of CB125T that I used for another model of car I did
Big bikes often have a separate switch box and throttle holder But in the case of Mini bike, there is a good chance that Switch box and Throttle The holder is integrated
And with the NORMAL Throttle cone, when you install the external carburetor Full throttle if the throttle valve cannot be raised fully or if it is not regrasped It may not be
This is a recommended product for those who want to improve such conditions
I had simply ditched the NORMAL Throttle cone for this purchase It is only, but it seems to be expensive to find a used one, and the purchase of a new one of OEM is also something that is not I chose this one because it's not white
The CB125T (Throttle holder) is also available without incident
Basically, if the Handlebar is 22.2mm and the Throttle is 1 pc off, you can use it It can be done, can't it?
The Grip was 110mm, so it's a moped size
Since this is a Pierced Type, pay particular attention to the length of the Grip
Probably if you try to put a 125mm one on, it will be hard to turn around
The Carburetor I used is PZ27, which is the so-called KEIHIN PD series Carburetor
Full throttle was possible without regripping the Limit
It seems that the Switch box of CB125T is going to be able to use the Switch box of CB125T on the Custom vehicle safely
If you put the Grip on, it will be completely invisible, but the color is black and the surface is uneven as the name suggests is not Flat
I don't mind it when I install a regular Grip, but thanks to the Flat, I can use the Grip heater as a I appreciate it when I put it on
You can use Posh with confidence as the quality is stable
View detail
Fits: HONDA Super Cub 70, HONDA Super Cub 90, HONDA little cub, HONDA little cub
Don't underestimate the 10 percent
The duo from Tokyo were surprised to see a pair of guys from Tokyo at the Super Ultra Low Slow and Iron CUB
That family's LITTLE CUB is also surprisingly low profile, so the full opening is as far away as possible
That distance is Level to regrip
Thanks to that, the throttle could not be turned back on at the full throttle to brake rapidly from the full throttle & hellip! ;…
What an experience shareholders should probably buy
[Only 10% change
This Throttle...only 10 percent change You're wondering what the difference is only 10 percent!
Ladies and gentlemen, when the sales tax changed from 8 per cent to 10 It was only 2 percent and you made a LARGE fuss about it!
That's what I mean
With this on, the Ultra Low Slow becomes a normal MotorcycleLevel
It's so effective that it becomes an ordinary Motorcycle sensation Throttle It is not suitable for those who want a High Solo with a high level of performance
I don't like the OEM low slots; I converted my carburetor to a Large caliber This is for people who are
But this 10% is pretty effective, and the price is cheap, so buy it and feel cheated Please give me a copy
We do a good job for the price
[About the exchange]
The installation goes generally as per the Instruction Manual with no problems
But the grip thrust washer that comes with it, be careful of the order in which you put it in
I forgot about it, so I cut off the edge of the washer and put it in later
Well, it still doesn't cause any problems
By the way, exchange Timing is Recommendation when you exchange Grip
I also remove the Grip
Huh? Want more High Solo? I think you can drop your gold in Mukawa
Mukawa High Solo ▼
https://www.webike.net/sd/542666/
This is 22% High Solo
But the Takekawa is too expensive for me, so the CF POSH one is more affordable I think it is
View detail
Fits: YAMAHA Remote controller jog, YAMAHA Remote controller jog, YAMAHA Remote controller jog
Tsuruntsurun!
[Color] Buy Clear color. Replacement was also easy and satisfied! Well, especially noticeably there is nothing, but the price was cheap, it was a convincing result! View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
I used it for Grip exchange of SR 400.
I used it when I changed Grip and Handlebar of SR 400. If it is OEM's Throttle cone, there is a protrusion and it is not possible to replace Grip well without cutting it, but by using this product it was possible to install it without machining! Although it was said that it will be some High Solo In a good sense, it was almost the same as OEM, so it did not hinder operation.
When I exchange Grip I definitely recommend this item.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Also FCR Carburetor Body mounted car
My SR is equipped with FCR Carburetor Bodycarburetor. I think that it was certainly 8% High Solo, but it's not that much of a bother you, but rather it's easier to downshift easier. Because the color is also Black, the cone became inconspicuous and Visual became better as well. By the way, Grease is not painted on Handlebar.
Correct answer to paint?
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Rather than processing OEM
Rather than machining the OEM's Throttle leaves, it is easier to use this item as an open end. Since the size of 120 mm Size Grip is exactly matched Size, I put RossiGrip in it. I thought that it would suit the SR, but it became an ordinary grip because it is too thin of the OEM and it is very easy to grasp.
Weight's heavy Bar End was attached and the vibration was alleviated.
View detail