Reviews
Used for techserfu's Silencer
Used for techserfu's Silencer which is mounted on GOOSE.
The dimensions are almost perfect. Purchased a second one after it fell off & was lost on the street the other day.
One thing to note is that there was only one hole on the Silencer side for fixing the baffle, so when the baffle was fixed in one place, the fixing hole was shaved off and the baffle disappeared due to vibration.
Two screws are cut on the BaffleBody side for fixing, so be sure to fix it in two places.
View detail
The fine Size is selectable, which is appreciated.
I purchased this one because the Screw pile on my current Baffle had been crushed.
The construction is solid with aluminum cut-outs.
I measured the size and purchased it, but the baffle was a little too large, so I had to shave it down and install it.
No complaints about the sound deadening effect.
View detail
For vehicle inspection.
It is good because it is inexpensive, and I think it is easy to process because it is made of aluminum. View detail
Performance as a Baffle
Looks and finishes are good.
I've gone to the trouble of installing it.
There was almost no change in volume as Baffle.
View detail
DF200 DJEBEL Used at Rough & Road RSVSilencer
I purchased a used RSVSilencer and installed it because it was too annoying.
BoltQuantity for installation:They said 2 pcs, but we decided to TRY with 1 pc.
The rear end of the Silencer is gradually enlarged from 3, 4.5, to 6.5mm to allow the attached M6 bolt to penetrate.
"Okay" and put it against the Silencer exit... I can't get in!"
Caliper's actual measurement was 47mm, so I bought 47mm, but 46mm seemed to be the right choice.
I inserted it by tapping it as hard as I could with the wooden handle of the plastic handles.
After the installation, the exhaust sound was very loud. Slightly more energetic NORMAL?" Ranked first.
When Idling "Chica Chica." and the Tappet sound is so good that it sounds like a HUDDRILL. This is good.
I immediately performed a test run and did not feel any extreme power down, even when I turned it as hard as I could.
Also, totally unexpectedly, the low-speed Torque was enriched.
I am satisfied with the Large change because it is quieter and easier to ride.
I found this in someone else's Review, but the Hexagonal Wrench was not attached.
View detail
Aluminum is dirtier and less rusty
Material:I chose this one because it is aluminum and seems to be rustproof.
It is not cheap, and the precision is perfect.
View detail
It'll be quieter than you think.
I installed it on my KSR110 Nassat RR with an external exhaust system, and even though it is a JMCA Certified exhaust system, I bought it to avoid disturbing my neighbors because of the heavy bass sound. It is quieter than I expected. I don't think I'll have any complaints about this. View detail
Used for SUNDANCE HYPEROrange
Used for SundanceHYPEROrangeExhaust System for XL883.
I installed this product to reduce the volume at the time of vehicle inspection. (Required processing)
The car passed inspection with no problems.
View detail
Best way to keep the volume down!
Our new addition to the family, the NINJA Exhaust System, was a blast.
For me, living in a housing complex, it's a Large problem.
So I bought this product to quickly turn down the volume.
If you put it on, it has a significant sound deadening effect.
However, the exhaust air pressure may be too high, or it may be too high at mid-acceleration.
When I open the Large Available Axel, the Engine won't turn with a buzzing sound.
In a straight tube, it blows up good...
It was a choice between volume or performance, and which was the priority.
The answer I came up with was to buy a new Silencer! next to (esp. to)
This product has been discontinued.
The product itself has high machining accuracy, 2-point stop, HexaWrench included, and is a good example of a good quality product.
I think it's a high cost product.
View detail
JUST to AXIS Lapovic's Silencer
VTR1000SP's AXIS Lapovic Racing line Silencer on VTR1000SP, the end was just fit for 48φ. It is a special part for vehicle inspection, though. View detail
Thank you for the wide selection of products!
Put InnerBuffing in Harley's Short Exhaust System I installed this product in addition to the one that still has a large sound The sound volume is good Thank you for your help View detail
I bought this to lower the volume of the exhaust system
While the road legal reading of 88db is fine, it doesn't interfere with the neighbors' restful sleep when they go out early in the morning I ordered it to be
The diameter of the exhaust port is just over 44mm
It was explained that it is 0.2-0.4mm smaller than the Baffle's display size, so it is not necessary to use it quot;I ordered a 44mm outer diameter"
The actual one I received was also 43.6 - .7mm in outer diameter
And the Baffle went into the exhaust spotters, but when I turned on the Engine The Chatter sound was awesome!
The original Baffle goes in pretty tight, so I measured the outside diameter of this one and it was 44.0 to .1 it was 44.0 to .1mm
Chatter sound comes out with only this Clearance, and unfortunately, you can use it It wasn't
In the case of a halfway point of the outer diameter, you can only buy one size larger and grind them together It is
View detail