Reviews
Cancellation is not possible.
I was forced to buy it because I could not do Cancellation, View detail
Fits: YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400 CLASSIC
I bought it because I liked the way it looked, but I am satisfied with both the sound quality and the feel of the product.
I had been running with the OEM Exhaust System for a long time, but I wanted to install a cool Exhaust System, so I chose this Exhaust System.
Although Torque drops at low speeds, there are no particular problems with normal riding.
I have used it with all inner silencers installed, and I am personally satisfied with the sound. I think the volume is probably at a level that will pass vehicle inspections.
The design is austere and great.
I asked the shop to replace the Exhaust System this time, so I don't know how difficult the work is.
View detail
SHADOW400 NC34
Purchased because Normal muffler is too quiet.
Satisfied with the sound and Large without inner silencer.
View detail
Fits: YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100Classic, YAMAHA Dragster 1100, YAMAHA Dragster 1100 Classic, YAMAHA Dragster 1100, YAMAHA Dragster 1100 Classic
DRUG STAR CLASSIC1100 Ken-Tec Front bumper installed
[How is it used?
The size of the bumper is a little small, but when you actually put it on, it looks powerful!
Was the one you received as per Image?
I felt that the size was a little smaller than Image.
Was the installation difficult?
This time it was installed on a DRUG STAR CLASSIC 1100, but if there is nothing there, even an amateur can install it simply by popping it on.
How was your experience with it?
In my opinion, the size, texture, and design of the Bumper is quite suitable for motorcycles!
[Included Parts:were they on?
This time there were screws and brackets in the box, but there was only one small screw mixed in. That was a little disappointing. This time, there was a substitute screw, so I was able to install it.
[Was there anything that disappointed you?
The size of some of the parts was mixed up incorrectly.
Points to note when installing
It took me about 2 hours to install the bracket, and the instruction manual is easy to follow. The Blinker Bracket was removed, and a hole was drilled in the upper bracket of the Bumper. The Blinker Bracket was removed, the hole was drilled in the upper bracket of the Bumper, and a Coupler was attached to the Screw.
This product is easy to install if there is nothing to install.
View detail
Fits: YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400 CLASSIC
Did it sound as good as I thought it would?
It took me a long time to remove the OEM Exhaust System, but when I finished installing this Exhaust System, I was very satisfied with the Classical Style and Large?
The sound was not too loud and I was satisfied with the Large variation.
When I ran, I was fascinated by the vibration and sound that I could not taste with the OEM Exhaust System?
View detail
Fits: YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400 CLASSIC
Exhaust System Replacement
I am very grateful for the kind Touring friends who installed it for me. View detail
Fits: YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400 CLASSIC
nice sound (^^)
Sounds even better than I imagined. (^^) The installation instructions were well written and I installed it myself, but it took a while, but it was fun! I think Ken TEC is a very good exhaust system. I can buy it cheaper than others and the packaging is good. View detail
Setting after Exhaust System installation
The installation of the Exhaust System was done by two people and it took less than 30 minutes.
The sound is more powerful and it looks better.
The exhaust system of shadow400 is thick and good for parenthesis, but the sound was too quiet, so I changed it and I am satisfied.
Since you have to use a Normal muffler Bracket
When you remove the Normal muffler, it is convenient to remove the Bracket.
I changed the exhaust system and started to drive with the air cleaner set to NORMAL, but the setting shifted and the Axel did not blow after the middle opening.
It was noticeably sluggish, so I did a carburetor Setting.
I just finished setting up the Carburetor and it looks really good with the Torque look.
------------------------------------
Current Carburetor setting
102 Main jet on Front
112 Main jet on Rear
------------------------------------
There is a little Gasoline smell when AxelOff.
It may be a little dense.
If you want to ride with this setting, you need to increase the air volume.
I'm considering modifying the Air cleanerBox or adding an external Filter or something.
------------------------------------
The proper place for Main jet is
I'm thinking about Front100Rear108 for the summer.
I have the 100 and 110 Main jets, so I'll ride them for a while, see what the Plug is like, and decide.
------------------------------------
Main jet is KEIHIN Maru Large.
Main jet 7mm wrench is needed to remove it.
It would be better to have several slotted screwdrivers of different thicknesses to avoid damaging the main jet.
------------------------------------
Removing the Air cleanerBox or carburetor and replacing the Jet is a three hour job for an experienced person, so it's worth a try.
Many of the screws around the carburetor are soft, so you will need a tool that fits the screw hole.
Those who do so do so at their own risk.
------------------------------------
The diameter of the air cleaner duct carburetor mounting is approximately 50mm
If you want to add a Power Filter or something similar, you will need its Size.
View detail
Fits: YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400 CLASSIC
It is sound and durable.
The sound is very good.
I used it for 14 years and there was no noticeable deterioration.
Rust is also slightly present in the silencer area, but it is very clean.
I think it is cheaper than the modern Full Exhaust System.
The vehicle inspection will not pass in NORMAL.
I used Inner silencer.
View detail
Fits: YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400 CLASSIC
Paughomancy is so good!
Silencer's attachment point was bent and broken, scratched and otherwise disgusting
I managed to fix it with radio pliers, Nipper, etc
The packaging is messy, which is a shame
But the exhaust system itself, as installed, is good
View detail
Very good product
I installed it on my SHADOW 400 The installation accuracy is very good The exhaust sound is not so loud even if Baffle Silencer is removed The appearance is also very good View detail
Fits: YAMAHA XV1600 R100 ROADSTER, YAMAHA XV1700R100 ROADSTER
Thank you for the commodity corresponding to the price
Owned car Yamaha R100 ROADSTER Midnight Silverado 2006 year
Start mounting work as soon as the product arrives! Easy to Sound comfortable after engine start
It is not an explosion rather than the imagined sound. It is not enough to worry even if Baffle Silencer without it is Large !?
Easy installation can be mounted as well.
View detail
Fits: YAMAHA DRAGSTAR400 CLASSIC, YAMAHA DRAGSTAR400
The price is reasonable!
As expected it is making Ken TEC.
Texture is not cheap, it also has a heavy feeling.
It also has Bracket and can be attached to DRUG STAR.
The exhaust sound will change.
Large Thick and thick.
The fastest speed will rise.
Jet is also included so you do not have to adjust it over time or gold.
Depending on the Exhaust System, I think that it is no problem with Jet attached to Kit if Drag pipe, Slash cut etc..
Although it feels a bit high, it can be said that it is suitable for the price considering the point that there is no need for adjustment and the quality of goods.
If you dare to mention problems ...
Slow speed comes out.
It may be due to the changed Exhaust System ...
It is natural that this is a Custom.
Considering the painting, because there is not made a place where Screw sticks, paint may get stuck when installed after painting. In other words, it may be said that it is made with accuracy as much.
I painted Black and made a simple valve to adjust the Jet adjustment and the amount of air intake so that it would be my favorite run.
View detail
Fits: HONDA STEED400, HONDA STEED600
To Large people Bike
Harley FAT BOB of the 1980s had this type of Exhaust System and I longed for it.
Buy BIKU with Return. Although it was Dual Silencer's external goods Exhaust System,
Purchase immediately.
Installation was not too difficult.
It becomes a heavy sound and I am satisfied but I wonder if the feeling sound is Large.
Contact Manufacturer Thank you for your prompt response to add Gold Shovel and Glass Wool.
It became a satisfactory volume.
View detail
Fits: HONDA STEED400, HONDA STEED600
Large It is satisfactory!
I bought a Motorcycle for the first time in 30 years last year, and I am drawn to charm. However, I was not satisfied with the sound of the String Rush Exhaust System that I arrived at the time of purchase, and I bought this time.
The volume is quite loud, but the sound quality is impressed by the bass sound.
Torque does not fall even at low speeds, and since around 60 km, it was as good as not being compared with the previous one, and it was solved from the earlier bad feeling.
This Kentec absolute recommended item.
View detail
Fits: YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400 CLASSIC
Because the sound of NORMAL was dull...
DRUG STAR CLASSIC 400 Injection mounted in a car. If you have a box wrench you can attach it by attaching it. Although it is the key sound, Idling is more like a gogogo than a doododo. The sound volume is a bit bigger than I expected, but it is not enough to cause a neighborhood inconvenience.
SHIFT UP up to high revolution during acceleration, plunging sound, but it is not enough to worry. The appearance looks like Plating is beautiful and shape and like an old-fashioned Harley. As an external exhaust system, I think that it is sound quality, volume, appearance, passing point.
View detail
Fits: YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400 CLASSIC
I'm really happy with the Exhaust I love the sounds. And also like that you can remove the Baffle silencers. Thank you very much.
I'm really happy with the Exhaust I love the sounds. And also like that you can remove the Baffle silencers. Thank you very much. View detail
It is whether the direction which explosive sound roaring likes is quite good. The attached Stainless wool was individually indispensable.
It is whether the direction which explosive sound roaring likes is quite good.
The attached Stainless wool was individually indispensable.
View detail
Fits: YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100Classic
[ -- the webike Monitor ] -- although it is quite explosive sound roaring, it becomes quiet by attachment of an attached Baffle. A Box wrench did not enter but attachment of the Exhaust pipe of the Front was serious. I thought that he could be
[ -- the webike Monitor ]
-- although it is quite explosive sound roaring, it becomes quiet by attachment of an attached Baffle.
A Box wrench did not enter but attachment of the Exhaust pipe of the
Front was serious.
I thought that he could be kind if the
Gasket is attached.
View detail
Fits: YAMAHA DRAGSTAR400 CLASSIC, YAMAHA DRAGSTAR400
[a Webike Monitor] -- -- thinking that he will exchange until now since it was a pure round Air cleaner -- -- this Air cleaner was purchased. It is the Air cleaner of Recommendation in which low-pitched sound also
[a Webike Monitor] --
-- thinking that he will exchange until now since it was a pure round Air cleaner --
-- this Air cleaner was purchased.
It is the Air cleaner of
Recommendation in which low-pitched sound also heard the sound of liking
and a Muffler in
and appearance for which a good point
, cheap
, and
and structure to which acceleration became good, so that it could feel are also solid.
View detail