Reviews
Fits: HONDA SUPER CUB 50, HONDA CHALY 70, HONDA CHALY 70, HONDA CHALY 50, HONDA CHALY 50, HONDA CHALY 50, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA CHALY 70
The quality is not good
It's thin and cheap, it's going to cut my hand and Gasoline is going to leak.
If you want to pay $1,000 for this, you might as well buy an OEM keyless Cap for $1,500.
View detail
Not for groms.
Purchased for installation of High Camshaft on Grom, but it was too short to fix. View detail
Not into TTR. (___;)
Not into TTR. (___;) View detail
Not usable !
This decal for Honda Monkey Z50J1 Restauration ist not usable. IT`s a simple, low cost, thin decal. Not the 3M Laminat as mentioned. The orange color is faded. I will throw it in the bin. Not usable View detail
Fits: HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA NSR80, HONDA NSR50, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA APE 100, HONDA APE 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY, HONDA glom
Fixing plate defective
Fixing plate could not be installed and we had to use the previous Plate.
If you want to purchase this, you normally recommend KITACO.
View detail
Fits: HONDA DAX, HONDA MAGNA50, HONDA Jazz, HONDA CD50, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA MONKEY, HONDA GORILLA
Tune to Normal piston.
I used it to try to match a KITACO High-compression Piston, but the Tappet sound was so bad that I changed it to a …Normal piston and it was back to normal.
Apparently, it should be considered for Normal piston.
good point
Normal engine can be used for higher RPM.
It is not as good as KITACOSPL, but it turns okay.
Hill climbing performance is also good.
Cheap.
A bad point
Cannot be used for High-compression Piston.
The width of the Engine Spec. is narrow.
I think it is good parts if you want high rpm and high speed with normal engine.
View detail
Fits: HONDA BENLY50CD50, HONDA APE 50, HONDA MONKEY
Caution.
Purchased for HISATank for nsr50. At first it was good with no initial defects, but I took it off and stored it to repaint the tank. I asked a friend of mine who is familiar with motorcycles to take a look at it, and he said that the rubber packing inside was deflated by the gasoline when it was first used. I asked a friend who knows about motorcycles to look into it, and he said that the rubber packing inside had probably swelled up with gasoline when it was first used, and when it was removed and stored, it shrank more than when it was shipped. I ended up having to buy a new one. This was the first time I had ever had a cook that became unusable once the Gasoline was removed. View detail
It was good when I first bought it.
I purchased this product because the Cell Motor of Co-MAJESTY had difficulty turning.
It was good for a little over 6 months, but gradually started to not work at times.
Just one year later, he passed away as his life span seemed to have come to an end.
View detail
MONKEY
Blinker became unusable due to a broken bulb while driving on a farm road. View detail
Sadly these did not work for me
About quality and texture - The whole tool is made of quite thin materials and feels undersized. For example, the handle has square edges and even with the covering it hurts to hold this tight in your hand and turn it. I found that I needed to hold it tight before turning as the lock screw is very thin (M3 size?) and if felt that if I tightened it too tight i would just cross thread it or round it off, although the folded steel bracket that holds this screw bends when you tighten as well so maybe its poor design (only held on one side) would stop that? About the feeling of use - It hurts to use this tool on an old caliper that needs a lot of pressure. I expect this would be ok on something that was in good condition, but on an old rusty caliper (with clean piston faces) this tool did not work. The (looks hardened as you can see in the photo) grips in the 'jaws' dug deep into the old piston inside edges and ripped the steel. Not something you would wish for if you wanted to keep those pistons. About Design - I think the deisgn is good but this set is cheaply made and I expect not the best example of the design. It is certainly not strong enough for being used on an old caliper where is piston is tight as that needs force to move it free, but I think that is probably the only reason DIY people like me would buy this tool. So, I have to say the design is 'bad' in this case. Cost performance and comparison with other products - It is cheap, but for my use it was money wasted. I didnt break it so I can at least use it on other (better) calipers, but it didnt do the job I wanted even when I heated the caliper. So I spent money on a tool and am no further forwards. There are other tools that look similar and I would look at those instead of this one. About shipping and packaging - shipping was fast and it was well packed. Any concerns, cautions, or advice when purchasing - I would not purchase this tool again and I suggest any potential buyer looks for another version that is built much more strongly if they are trying to work on old calipers. View detail
It has a higher percentage of glass fibers than Titanium, and the manufacturer knows it, but they sell it as TitaniumVantage. Vinyl gloves are included with the product. View detail
Fits: HONDA MONKEY, HONDA APE, HONDA CT125CT110 HUNTER CUB, HONDA XRMOTARD, HONDA CHALY, HONDA DAX
Rear Maintenance Stand NORMAL
Rear Maintenance Stand NORMAL
I could not use it on my Grom JC92. The description reads like it would be compatible with NORMAL, though.
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
It leaked.
It started leaking 2 months after purchase. If it is bad, it will be a vehicle fire. I would like to have it replaced or returned Gold. View detail
The hole position is …
It was the first time for me to use Minimoto's product, but as other people said, the hole position was not correct and I couldn't fit the bolt. It seems to be no problem to use, but I would like to have it made more firmly. View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
All lies.
Anyway, the welds are so bad that even compatible models can't be pimped out, and it interferes with the rear suspension, and the angle of the inserts on the engine side don't match, so I'm just laughing. (Lol) If you buy this, you must have both Hand Bent on the Engine side and Hand Bent on the Silencer side. I can't get the Hand Bent so I'm using only one side of the Bolt on the Engine side and forcing the back of the Bolt to be spread outward, but I'm not sure if the back of the Bolt can handle the exhaust leaks and the impact of driving. I really wish I hadn't bought it. View detail
Pilot Jet
I forget the number, but the hole was plugged. View detail
Fits: HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA NSR80, HONDA NSR50, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA APE 100, HONDA APE 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY, HONDA glom
I bought this with the intention of using it with nsr80 but…
The groove of the fixing plate is too large to rotate, so I could not install it.
I wonder if it can be installed on a MONKEY engine.
View detail
Fits: HONDA MONKEY, HONDA GORILLA
I was injured on Edge.
This is a lousy product. I cut my finger on the edge when I turned the device with my bare hand. I have a lawsuit on my hands. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA DAX, HONDA CHALY 50
The length of the Axle Shaft is not enough.
I thought I could install it right away, so I pulled out the Axle Bolt without curing the wheel. When I installed the AxleBolt, I found that the Ring part of the Chain Adjuster was too thick and the Axle Shaft was not long enough. I gave up using it in the end... I don't know why they sell products that can't be used, but it was a pity... I think it was a bad idea to order it without thinking about the size etc. because it was a compatible part... Please be careful when you order. View detail
Not available
It's almost impossible to use it properly.
Garbage
View detail