Reviews
Required for Engine disassembly and assembly
This is a special tool needed when disassembling and assembling engines. I use it for disassembling and assembling MONKEY engines. View detail
Fits: HONDA dachshund, HONDA Shirley 70, HONDA dachshund
CHALY Required for
CHALY I bought this product to put together a Cable for my Fender in the U.S.A. It is very similar to the OEM and works fine. View detail
Terminals Waterproof and for insulation
Used for the crimping part of the Brake terminal.
Mainly for waterproofing purposes. To be honest, I thought two Shrinks would be enough, but I was attracted to the fact that there are various types of Covers and that they come with a Case. I will keep it for a while because I can use it in case of emergency.
View detail
I couldn't use it well.
I bought this tool because I am not good at putting the piston through the cylinder when assembling the engine of MONKEY. However, I could assemble the engine better by hand without using the tool, probably due to my lack of skill. View detail
That's about it
I used it for the first time and was able to adjust it. It would have been easier if the tip was cut thinner to make it easier to get into the gap. View detail
Not for groms.
Purchased for installation of High Camshaft on Grom, but it was too short to fix. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
Fitted to a Gorilla
ive fitted this to a Honda Gorilla that is black and it ties in well, paint was in good condition and the product was exelent View detail
Direct Bolt on for chaly or dax
A nice OEM looking peice to finish off your cable management for both brake and speedo cables. and comes with bolts that fit both genuine and aftermarket guards View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA MONKEY
Fitted to a chaly
Ive fitted this to a chaly that is using a different ignition to stock and it fits well and holds everything in place will order another in the future for other bikes View detail
For Mini bike.
There are similar products, but this one is priced lower than the others, so I think it is a good cosmetic product.
I will use it with a Mini bike, but I think it will also be Large sturdy enough for other uses.
View detail
Perfect for MONKEY
The Universal Product I bought for my MONKEY at a flea market site needed to be shortened and modified, but this one fits perfectly. View detail
Used to convert 6V vehicles to Clear blinker
[How is it used?
[Color] I changed to ClearEuropean Blinker and needed Orange bulb.
How was your experience with it?
Works fine. Unlike the cheap Orange bulb, the paint was well done.
How did it compare to other products?
I'm afraid you don't have to worry about 6V Orange bulbs because there are very few options.
View detail
Fits: HONDA glom, HONDA PCX150, HONDA PCX125, HONDA LEAD125, HONDA DIO110
A simple part that helps to bypass a faulty switch
About quality and texture, I can confirm that the quality is great and that the materials used are a combination of white moulded plastic for the plug, copper spade fittings for the electrical connectors and black insulated wiring for the jumper wire. About the feeling of use, This simple part has helped to bypass my faulty side stand switch and get my Grom up and running again. Products to buy together, While working on the wiring on the bike it would be ideal to also add a USB charger to your cart for the convenience of charging your mobile phone. Difficulty of installation, I can say the fitment of the side stand switch canceller for my installation was very easy due to the open access to where this plugs into the main harness and the plug and play design where no modifications is required. Cost performance and comparison with other products, The pricing of the product is great. You receive a product made from quality materials that does away with the original part that can fail causing problems and saves weight and space, also available from Kitaco at the same price. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Used for PWK28.
Used for Chinese PWK.
It's a Jet, so there's nothing to write home about it, but it's cheap but made with precision.
I can use KEIHIN-compliant Jet for Chinese PWKs, which is very useful.
I think it is a necessity at the time of Setting.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
Good quality and sound from minimoto.
I have two of these pipes. I use them on 1969 k1 rigid framed with 108cc stroker kits. They sound good without the baffle and not too loud. Bike runs great with them. The finish and fit is very high quality. Polished nicely. Beautiful welds. View detail
cute little
It is good to have the name CT110 HUNTER CUB written in Retro. View detail
Retro feel is good.
The material of the Key Holder is soft and will not damage the keyhole.
The design is also good with a retro feel.
View detail
Thick copper
I usually buy in bulk, but I had to adjust for shipping costs.
I prefer copper to Aluminum.
It is quite thick. It may not need to be this thick.
I replace them every time, so it is easy to purchase.
View detail
Fits: Others Product ID 0311 Loncin 125cc, Product ID 0313 Loncin 125cc, Product
Oil Temperature Gauge Stick Type (CROSS CUBJA45)
It has been almost 6 months since I purchased it.
Can be used interchangeably with OEM Oil Dip Stick.
The intake and exhaust system is NORMAL, so temperature control is not necessary, but it is just right for a little custom.
In the winter, the temperature was 60°C, and the other day, when the temperature was 36°C, it was up to 100°C.
The amount of engine oil is the same as the OEM length, so the amount of oil can be controlled when changing oil.
I think it's good
View detail
Grom JC92 can't be used as it is, but I was able to get the Piston Pin out with ease.
Piston Pin Puller, very useful.
I bought it because it was listed as having a compatible Piston Pin Size of 12mm to 25mm, but I need to take a moment to pull out the 12mm Piston Pin of the Grom JC92.
The construction of the product is very good, the grips are anodized, and it is not cheap.
Four types of attachments are included for pulling out the Piston Pin, which may be used on Large Motorcycle.
In the case of the Grom JC92 Piston, the smallest attachment has an outside diameter of more than 12mm, so the attachment is caught on the Piston perimeter and does not reach the Piston Pin.
So I pulled it out by biting a Spacer with an outside diameter of less than 12mm and about 5 cm, as shown in the photo.
The Curve on the Piston contact side of the Grip section was also fit to the Piston.
The Piston ring acted as a good buffer to prevent damage to the Piston, so there was no need to protect it with Dustclothetc.
View detail