Reviews
Is ServiStool easier to use?
Purchased due to lack of OEM Product adjustment Wrench.
The YZF-R3 adjustment Wrench I used to use is sufficient for my needs.
I tried Universal Product as a test.
Half of the Wrench is movable, so you have to hold the tip of the Wrench by hand each time.
It is a Universal Product, so there is no choice.
Other than that, I have no complaints.
View detail
Brake fluidTankfor replacement
[How is it used?
Brake fluidTankfor replacement purchased
Was the one you received as per Image?
As per Image, as per appearance
How was your experience with it?
Syringe.
[Points to note]
I can't think of anything in particular.
How did it compare to other products?
I've never used other products, so it's hard to say.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
good
I think it is worth buying because it can be used for various types of cars!
It would be nice to have one, especially for a 4MINI, as it will be used more often!
View detail
Cheap, but not easy to use.
[How is it used?
Used for Engine O/H of TZr50R.
In particular, a universal holder like this product is needed to remove the fixed nut of the Clutch.
Was the one you received as per Image?
We selected this product because it had the lowest Gold amount.
To be honest, I thought the cheap price would make the product quite poor, but it was not as bad as I expected.
The supplier may be the same as the ones offered by other Manufacturers because the pictures are the same.
How was your experience with it?
The ease of use is not all that great.
In the case of TZr, the fixed pin is hooked to the clutch housing, but the fixed pin is short and easily comes off,
I cannot apply force well. I have the impression that the size is not right for 4EUEngine, although it may be just the right size for other Scooters.
[Points to note]
Be careful not to put the fixed Pin in the wrong place.
I used it on two engines and accidentally put a pin on the bolt hole of the clutch, destroying the bolt hole.
How did it compare to other products?
Similar products are lined up at similar Gold prices, as if the suppliers are the same.
Once you buy one, it will last a lifetime, so you might as well get something a little more decent.
View detail
Maintenance of Chain, which I am not good at, could be easier.
I've only done simple cleaning when I sprayed oil in the past, so I think I can do it a little better from now on. View detail
Low price but sufficient Quality
The price of Motion pro was too high, so I went with this one. The price is a quarter of the price, but the quality is solid and this product should be sufficient. The box is just a bonus, and the lid closure is so roughly made that it won't close after a few uses. View detail
Spring Detachable
I purchased this product to use for removing and installing springs when removing and maintaining the Exhaust System.
The length is just right, no slippage or pain at the grips, and they are easy to use.
I don't use it that often, but it would be useful to have 1 pc.
View detail
Required for Engine disassembly and assembly
This is a special tool needed when disassembling and assembling engines. I use it for disassembling and assembling MONKEY engines. View detail
Not for groms.
Purchased for installation of High Camshaft on Grom, but it was too short to fix. View detail
ネジのサイズに応じてライトプレートを吸引するのに使用され、使いやすく、ご注文前に製品の詳細をご覧ください。 View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
AF24Giorno
Used for AF24Giorno.
Coil was easily removed.
View detail
Fits: HONDA CB900F, HONDA CBX1000, HONDA CB750F, HONDA CB1000C 83, HONDA CB1100F, HONDA CB900F, HONDA CB750F
Can be used for CB750F
I bought this to replace the ValveShim on my CB750F. The Honda-specific tool is already discontinued, so some people make their own. At first, I tried this Hondafor Vehicle. The actual tool is surprisingly small, but it's not to be underestimated:just insert the tip of the tool between the cam and push it in, and the valve lifter will drop and the shim will be easily removed. The cost is great, and it is truly a god tool. View detail
CRF100F (2007) Used in
Flywheel can be easily removed without any problem.
It is only a tool to remove Flywheel, so I wonder if it is cosmetic. Anyway, the Flywheel can be easily removed.
View detail
MINIMOTO Minimoto Tappet Adjustment Tool 3-Size Set
Fine-tuning of Valve clearance is more convenient than using ordinary tools
The accuracy of the tools is low and I would like to see the system a little more precise.
View detail
It is not a tool that is used so much in Private, but …
I had a Pin type Holder, but I bought it just in case.
It was more solid than I expected and the desired work went off without a hitch!
View detail
Fits: HONDA MONKEY, HONDA DAX70, YAMAHA Yamaha50ccScooter, YAMAHA GRAND AXIS, YAMAHA JOG90, YAMAHA AXIS 90, HONDA LEAD 90, HONDA MONKEY, HONDA Honda50ccScooter
Solidly built
Purchased for disassembly of Clutch.
It is well made, and although I purchased it for the Clutch maintenance of the Address100, it is still a generous Size and can be used for the MAJESTY250.
The shape is designed for use with Wrench, and it can be easily disassembled and reassembled.
View detail
no problem
[How is it used?
To remove the center nut of the clutch
Was the one you received as per Image?
Yes
How was your experience with it?
It can be used with no problem, but you have to apply it firmly and straight.
Easily slanted
[Points to note]
Centrifugal for Clutch Band holder required
It said not to use Impact.
I used Impact when loosening lol.
It is only used when ClutchRose is used, so it is not likely to be used anymore.
View detail
cheap
OEMClutch holders are expensive, so we purchased this one.
Unlike OEM, it is not fitted into a hole, so although it is unstable, it can be substituted adequately.
View detail
Reasonable
OEM clutch holders are expensive, so we used this one instead.
This is sufficient for use.
View detail
I chose it for the cospa.
I bought this in a hurry because the Piston Pin was very dirty.
I chose it for its price, but after using it, I am satisfied with its workability and functionality.
View detail