Reviews
I couldn't use it well.
I bought this tool because I am not good at putting the piston through the cylinder when assembling the engine of MONKEY. However, I could assemble the engine better by hand without using the tool, probably due to my lack of skill. View detail
It's cheap and easy to use. But …
Cheap and easy to use.
But to be honest, it is not essential, because it can be inserted by hand without it.
I bought it, but it became a hassle to use it, so I had to put it in by hand.
View detail
Ordinary Microfiber Cloth
I used up the CROSS for wiping Motorcycle, so I bought a new CROSS from Minimoto. 300mm×It is labeled as 300mm, but actually there are some with Rose, and some are 5-10mm shorter.
Usually I wipe Motorcycle with four folds, but it is delicate to wipe Small because of its 300mm size. But it is too large to wipe with the large size, and too long and thin to wipe with the double-folded one, so it is too short for the belt and too long for the sleeve. Stain removal is normal.
Quantity at $1,342 for consumables.:1 Set of 20pcs. is cosmetically good, but the size is too small to be useful for me personally. 350mm or so would be better for me;
View detail
I'm torn!
It is soft made of rubber and not good to use.I used it for about 1 year and it was shredded when I tried to pull it out from Exhaust System. I used it for about a year and it broke off when I tried to pull it out of the exhaust system. It was just a cheap product. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
Unsuitable for adherent flaho
I used it to remove the flywheel from my 30 year old Motorcycle and it was easy to use It's not good
One thing that is not so good is that the Handlebar, which is the part to put the force, is screw shaped and It is the point that it is not possible to work with force, such as biting the Pipe
You might be able to use it for a non-adherent flaho, but remove the flaho when it's not sticking in the first place I don't think there are many opportunities for this
By the way, the Furaho that couldn't be removed by this product came off easily with the OEM tool
View detail
Does Not Fit 2015 Grom Clutch
Bought this to remove the stock clutch assembly on a 2015 Honda Grom. It does not fit the clutch. It bottoms out on the pressure plate housing that holds the bearing in place. Works perfectly for the oil spinner, though. View detail
It probably is reasonable.
Although I have not used it yet, as far as I can see, it seems that there is no problem in using it with Brake Pedal Shaft of VIRAGO, but it is slightly uneasy in terms of strength to use for KLX Drive sprocket exchange. View detail
It can break immediately with the first time
There was a set of Body and a substitute Pick.
First turn turn Screw before Chain cut and you see that Pick is bent.
Since I can not use it, I tried doing it with Cut, but it caught on pulling out and broke.
When I exchanged for a replacement Pick and turned Screw, it was not bent more than the first one.
Chain cut and tried to pull out again.
It is durable due to poor precision.
If so high things are better.
View detail
Part accuracy and durability are bad
It is typical of bad mood.
Whatever versatility is not to choose Size
Part accuracy is too bad and there is no durability.
didNon-seal (The cheapest one)
I used it to cut 525 Size.
The core is slightly bent from the beginning, it is difficult to capture the center
Furthermore, when extruding Pin, the tool side loses
The core cracked vertically, it got broken.
Although it responded with the attached spare parts,
Although it endured work,
I crooked again and I can not use it anymore.
It's almost disposable.
There is no complaint because the price is price ,,,
Conversely I was impressed with the durability of Did.
Parts pushing out the core (?) As
Small Sana Bearing has 1 pcs..
It is a part not included in Instruction Manual,
When exchanging the core, if you disassemble it inadvertently
Be careful as it will definitely lose it.
I do not know what will happen if it's gone.
View detail
Adjustment of Mono Suspension
I used it for the SRX 250 F, I purchased Small Type Wrench because the space is small, but Hook could not move properly. Perhaps my way of doing things was wrong, but I think the Fixed Type is easier to put power. I can not adjust it after all.
Perhaps, it may be good to do it after you have gone sideways and remove some parts you can remove more. I'd like to try again if I can do it..
Even so, because the price is the price, it may be a good product depending on the Motorcycle.
View detail
It is rusty and there is anxiety about durability
I found rust occurred at the moment I saw the bag since the item arrived. There was also rust powder in the bag, Socket also had rust like photo and traces like Oil stain. I paid a lot of money and bought a new item, but I felt like I was grabbed a used item and I am very dissatisfied.
View detail
Fits: HONDA MONKEY, HONDA DAX70, YAMAHA Yamaha50ccScooter, YAMAHA GRAND AXIS, YAMAHA JOG90, YAMAHA AXIS 90, HONDA LEAD 90, HONDA MONKEY, HONDA Honda50ccScooter
Drive system Custom - In Maintenance
◦ 【What made you decide the purchase?】 It was necessary to do the Custom of the driving system. In addition, I thought it would be useful during Maintenance and purchased.
◦ 【How was it actually used?】 To fight Clutch Large and convenient.
◦ 【Was it difficult to install? (Hard parts case)】 Any
◦ 【Please tell me the point of installation and hang (in the case of Hard parts)】 Any
? Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
◦ [Is there anything I was disappointed about?] It might be easier to use those who were vacant like others like other companies.
? 【Hope for Manufacturer】 - Please tell me if there are any improvement points】 I am satisfied with it because the price is cheap.
◦ 【Have you compared items?】 DAYTONA and KITACO.
◦ [Others] Any
View detail