Reviews
Universal Product
I bought it to clean the parts that were soaked with oil.
It may be a little soft, but I will adjust it by cutting it a little.
View detail
Fits: HONDA GROM, HONDA MONKEY125, HONDA MONKEY, HONDA DAX, HONDA MSX, HONDA XRMOTARD, HONDA CHALY, HONDA APE, HONDA CT125CT110 HUNTER CUB
MONKEY125 beware.
Purchased for maintenance of MONKEY125, such as oil replacement.
Be careful when lowering.
If you lower it too vigorously, your hand may get caught between the Arm of STAND and the License Plate.
Hands get caught, License Plate gets bent….
but with great strength and stability.
View detail
Handlebar Up Type changed to long wire
The product is for MONKEY, but it can be used with Super Cub custom Handlebar Up TypeSpec. and it is good to replace it with stainless mesh. View detail
Fits: HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA NSR80, HONDA NSR50, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA APE 100, HONDA APE 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY, HONDA glom
Sprocket
Sprocket, one of Motorcycle's smallest cogs. View detail
Fits: HONDA CD50, HONDA SUPER CUB 50, HONDA LITTLE CUB50, HONDA CL50, HONDA BENLY50S
Together with Engine Displacement VolumeUp
The cylinder was changed to a 50mm bore, the crank was changed to a 52mm stroke, and the engine displacement volume was increased to 102cc, so even in 4th gear, the engine would blow up in no time and was not busy. However, when the Driven Sprocket was set to 17T and the Driven Sprocket to 30, the car now has a mild acceleration that makes full use of the Torque and allows the driver to easily go with the flow even on main roads. View detail
GORILLA2V Change
Purchased 6VGORILLA for 12V changeover.
It was easier to do than collecting in Rose.
View detail
Fits: HONDA MONKEY, HONDA GROM, HONDA MSX, HONDA APE, HONDA MONKEY125, HONDA DAX, HONDA CHALY, HONDA XRMOTARD, HONDA CT125CT110 HUNTER CUB
Lightweight and just right for groms.
It is tiny and ExactlySize for groms.
I just put Swing Arm on it, but it is stable.
(Caution!)
Normal rear fender will cut your finger on the License Plate if you are not a little careful.
I will try Fender Eliminator one of these days.
View detail
For Parts Cleaning
[How is it used?
Used to clean Engine Parts of vehicles under Restore.
When I watch Restore videos, they all use a similar Brush, so where do they sell it? I was wondering, but when I went searching I found a few that are normal.
We purchased this product, which was relatively inexpensive among them.
Was the one you received as per Image?
It is just the right Size as shown in the picture.
Also, although the bristles are firm, I personally felt that they could be a little firmer. I personally felt that it could be a little firmer.
How was your experience with it?
The PVCNylon bristles, however, are not as firm, so it is somewhat difficult to remove stubborn dirt.
I think it is sufficient to remove ordinary dirt.
The hairs did not fall out during use.
[Points to note]
If you do not choose the right place to use it, you may scratch your car.
How did it compare to other products?
I used to do my best with Tooth Brush, but it was small and sometimes took quite a long time.
I felt that this product would be more suitable for use in non-narrow areas, etc.
【Review】
It was easy to use and inexpensive and necessary and sufficient for cleaning Parts.
Personally, I thought the hair could have been a little firmer.
View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA CHALY, HONDA DAX, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
To 4MINIOEM compatible
Although we do not ride hard, we installed a seal chain on the CHALY to improve maintenance. There are still some parts to come, such as durability, but there was some initial elongation. The seal chain is wider than the non-seal chain, so be careful when there is no clearance with the rear shock. View detail
Ordinary Waist
Just right for the Waist for everyday use. View detail
Large amount of Split Pin
[How is it used?
The TZr250R uses split pins in several places, and it is a hassle to choose the right size, so I decided to use Quantity.:I was looking for Set.
Was the one you received as per Image?
As you can see in the picture, the Large amount of Split Pins were separated by Size.
How was your experience with it?
Compared to the OEM Axle Shaft Split Pin, it was a little thinner even though it was about the same length.
The thinness makes it easy to bend, and since it is not a place where loads are applied, I personally found it easy to use.
I think the legs are a little long, but it's acceptable.
[Points to note]
The 2Size Left has 150 sticks in one divider, so it's easy to go through the side dividers. LOL!
You need to check the size carefully when using the actual product.
How did it compare to other products?
I thought about buying the OEM one, but it's more expensive and I need to stock it for when I need to use it.:I chose this product that came in a Set.
If you know the size you want to use, you may be able to use the ones sold by Rose at Home centeretc.
【Review】
It comes in a large quantity and the price is not that expensive, so it is good to have one if you are a frequent maintainer or have multiple units.
View detail
To APE with PD22 installed!
Used for Engine of APE100YOSHIMURA115carburetorPD22
Considering the sudden rain, I thought I'd stay dry.
If you're looking for a Filter with a 45 degree bend, this will work!
I used three Nitrile rubber O-rings of slightly larger inner diameter in the carburetor as spacers and Exactly
With this, I was able to install the Side coverSmall and the heat shield between the carburetor and the Filter to prevent rain!
View detail
Fits: HONDA GROM, HONDA MONKEY125, HONDA MONKEY, HONDA DAX, HONDA MSX, HONDA XRMOTARD, HONDA CHALY, HONDA APE, HONDA CT125CT110 HUNTER CUB
Perfect for the MONKEY125!
It is essential for maintenance. I'm glad it's cheap. Durability is unknown. View detail
Easy to use
I've been curious about Chain Alignment Tool for a while, and I got it from webikPoint!
So, I took some quick measurements, and I put the Sprocket and Chain on top of each other, and sandwich them together with the plastic screw, but you have to make sure that it's tightly fixed to the part of the Sprocket that doesn't have a hole!
The chain line seemed to be correct, but the stick that came with it was too short and I wasn't sure about it. So I went to Home center and bought an aluminum round bar. I cut it to a good length and used it.
I hesitated with the iron bar, but I decided to use Aluminum because I thought I might be crazy with Slant if it was too heavy. The thickness was 4mm.
I'll probably only use it occasionally, but it will prevent Wheel from being uncomfortable sideways to some extent!
I think that I was glad I bought it
View detail
COSPA is good.
This Microfiber Cloth has good water absorbency and can be used for wiping off water droplets at car washes, and can also be used for removing dirt from the body with cleaning agents. It is also convenient for wiping off wax because it does not scratch easily. View detail
The Ninja 1000 didn't need it.
The Ninja 1000's Chain pull is Eccentric, so it's not that much of a Quantity:Pair (for Left and Right) I thought I wouldn't go crazy with
After using this product, I knew I wasn't crazy.
I'm happy with that.
I changed the Rear Shaft to Chromoly, so it might not be crazy.
The same product has been released by DAYTONA, Straight, Astro, Monotaro, etc.
Monotaro is the cheapest.
All of our products are Made in Taiwan.
The bars could be a little longer.
It's a plastic Bolt, so it won't scratch Sprocket.
View detail
Fits: HONDA SUPER CUB 90, HONDA APE 100, HONDA APE 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA MAGNA 50, HONDA LITTLE CUB, HONDA DAX, HONDA MONKEY R, HONDA JAZZ, HONDA NSR50, HONDA MONKEY, HONDA GORILLA
I installed it on the Rear of my SUPER CUB AA09.
There was no mention of AA09 in the compatible models, but I was able to install it without any problems.
Brake works & Touch was very good.
I tried to repeat it because the brake ringing happened around 5000km use, but it had been discontinued.
I just Ordered a powerful Progressive Brake Shoe before and after.
View detail
Fits: HONDA MONKEY
For use with the 6V MONKEY/GORILLA Main Harness for Replace.
I bought it in order to divert 6V MONKEY/GORILLA Main Harness (for 6V early stage) for Replace made by the company to my car (6V late stage:car with Regulator). In order to use their 6V MONKEY/GORILLA Main Harness, you need 4-pole coupler to connect Harness side 4-pole coupler to Battery separately. However, the Coupler on 6V MONKEY/GORILLA Main Harness side is 110 type 4-polewith Lock, so you can use 110 type 4-polewith Lock Coupler instead of this Coupler. View detail
Split Pin should be used as a general rule for a new product.
The RZ uses the Split Pin for the Front wheel and Rear wheel nut locks. Of course, it is possible to buy them from OEM, but the price and delivery time are reasonable. minimoto's Split Pin is 555ps and cheap. I used to take it off and reuse it to avoid breaking it, but I've been using a new one since I bought it. View detail
Fits: HONDA SUPER CUB 90, HONDA APE 50, HONDA APE 100, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA MAGNA 50, HONDA LITTLE CUB, HONDA DAX, HONDA MONKEY R, HONDA JAZZ, HONDA NSR50, HONDA MONKEY, HONDA GORILLA
Necessary and sufficient!
I used it to service my 30 year old GORILLA (Z50J). It was compatible, but it installed with no problems! We will evaluate the braking power etc. after we drive it for a while from now, but we have no problems with it after we test drive it in the parking lot. 。 It's inexpensive and it's good. View detail